The vice is necessary for a clip of various details for the purpose of further processing. The models of these devices differ in the width of the clamping jaws, the methods of fastening on the workbench and the shape of the parts being grasped. Use them in metalwork, joiner's and jeweler workshops, and also in car-care centers. Each owner in the garage or in the country should be such a tool. The ranking of the best clutches will help you to choose the right fit and size equipment among the metalworking, machine-tool, joinery and pipe models that will help you to better implement the user's technical tasks.
Content:
The best metalwork vice
This tool is used to process workpieces with manual or electrical equipment. They have such models on workbenches, for which bolt holes are provided in their case, due to which very large items are allowed to be fixed in a vice.
SPARTA 186255 - for garage works
This is the best vice for various jobs in the garage due to its versatile design, which allows you to clamp quite wide parts with 125 mm wide sponges and an anvil for tapping metal plates or cutting steel.
The body of the vice is maximally reinforced by molding stiffeners in strategic places: at the exit of the sliding part, on the back side of the hollow frame and along the entire base.
Pros:
- the corrugated surface of the jaws provides good adhesion to the clamped objects, preventing them from slipping out of vibration when machining with an electric tool;
- the frame can rotate on a powerful axis, and the fixation of the selected angle of rotation is carried out with a corkscrew;
- four large holes in the frame for attachment to the workbench;
- stainless polished mechanical drive handle with restrictive balls on the end;
- compact dimensions of 410х210х190 mm will not occupy much space on the table;
- the presence of the anvil allows you to align small objects without departing from the workbench and not spoiling the surface of the table;
- the depth of the working space (from the upper edge of the lips to the shaft) 80 mm allows you to clamp bulk workpieces;
- the painted surface makes the appearance more attractive;
- clamping force is 2500 kgf;
- the cost starts from 1,800 rubles;
- suitable for percussion operations.
Minuses:
- need a solid table for placement;
- do not tighten too tight, otherwise it may crack.
Russia 140 18667 - with a long service life
These are the best clutches for a professional workshop or car service, because they have a particularly durable construction designed for a long service life. Thanks to S35L steel and simple maintenance in the form of a grease screw with guides, such equipment will last for many years.
The width of the jaws of 140 mm is suitable for clamping the hub, wide channel bar or other large parts. The rubberized ends of the drive shaft will prevent injury to the user if accidentally omitted in a vertical position.
Pros:
- the case rotates relative to the base and is fixed with a screw;
- reliable bushing on the main working shaft;
- unscrewing sponges can be removed and repaired or replaced;
- three-point mounting to the workbench through the mounting holes;
- corrugations on the surface of the sponges;
- compact dimensions 415x190x190 mm will easily fit on the table;
- 180 mm working stroke allows to install large parts up to 180 mm wide;
- U-shaped guide with a thick section of the wall;
- nice color
Minuses:
- cost from 5800 rubles;
- weight of 15 kg is heavy and needs a strong workbench for placement;
- no anvil.
The best carpentry vice
A joiner's vice is used to clamp wood and is characterized by high jaws to firmly squeeze wooden pieces, but not to break the fibers and material structure, due to the increased density of metal relative to wood.
Apply them in the carpentry workshop or in the garage. Key indicators are the height and dilution of the parties.
Wilton WWV / 175 65017EU 175x210 - suitable even for thick timber
These are the best carpentry vice for cutting or trimming a thick beam due to the possibility of diluting the sides up to 210 mm. The height of the sponge is 70 mm, which will not harm the wooden blank.
The frame has holes for mounting to the table. Support for the undercarriage, except for the screw, is additionally reinforced with two stainless steel rails.
Pros:
- thick cast iron with steel screw;
- 165x90 mm mounting platform dimensions fit easily on the edge of the table;
- 175 mm jaw width suitable for clamping large beams and shaped thread;
- there are no notches on the pressure side that could damage the soft work piece;
- smooth running due to shallow threads on the shaft;
- do not corrode.
Minuses:
- the cost starts from 4000 rubles;
- no rotation function;
- no clear parallelism.
Triton SJA100E TR281928 - new in 2017, which will hold the door
These are the best carpentry vice that appeared in Russia in 2017, which are able to unfold even to the width of the door leaf, which allows clamping workpieces of such a large type without additional devices.
The mechanism works with the help of a foot drive, producing a force on compression. Breeding sponges is done by hand, which eliminates the long rotation of the shaft when processing parts of different sizes.
Pros:
- the design has its own legs, which does not require a workbench;
- allowable load limit up to 200 kg;
- the legs are folded, which makes it easy to place a vice in the trunk and carry it to the place of work;
- sponge width 178 mm;
- you can rotate the case in any convenient direction;
- Replaceable jaws for various materials are sold;
- working stroke 955 mm;
- solid steel body.
Minuses:
- the cost starts from 9,500 rubles;
- weight of 14.5 kg is difficult to carry in different rooms.
The best machine vise
Such a tool is used on machines as an additional fixture of the workpiece, so that it does not vomit out with powerful turns of electrical equipment. Differs in the strengthened case and wide dilution. When buying you need to look at the method of placement, suitable to the frame of the machine.
WILTON Q75 75x80 mm WI91193RU - ideal for drilling
This is the best option vice machine, the best for the location on the drilling production equipment or in the garage. For fastening to the bed there are four grooves with a length of 60 mm each, where the studs are inserted.
The slots are convenient to adjust the exact position. A 75 mm wide sponge can grip a square, plate or small pipe to drill.
Pros:
- cost from 1000 rubles;
- stainless screw allows water cooling without damage to the tool;
- notches on the inner surface of the lips;
- breeding sides up to 80 mm;
- weight 2 kg;
- sufficient parallelism;
- the handle for clamping is rotated and compact, which does not interfere with drilling.
Minuses:
- there is no limiter at the end of the rotating handle;
- there is a backlash in the moving lip;
- There are burrs on the cast.
The best vise for pipes
Such a tool is used for clamping round billets (pipes and cast round timber), which is much more effective than flat lips with a small area of the clamp. In pipe models, the semicircular parts of compression are also the minimum and maximum fit dimensions.
RIDGID 25 40100 (1 / 8-4) - will clamp from 6 to 100 mm
This is the best vice for pipes due to its versatility, which allows you to part the clamping part from 6 mm to 100 mm. Quickly install the workpiece or remove helps folding top with a hook, and the screw is performed only the final clamp.
Pros:
- two even lower lips and one upper semicircular provide tight girth;
- hardened alloy steel plates;
- working stroke up to 100 mm;
- limiter balls at the ends of the drive;
- robust cast frame with reinforcements at the edges of the structure;
- quick removal of the workpiece.
Minuses:
- cost from 25,000 rubles;
- No body rotation function.
It will be interesting to friends too
