No carpenter and woodcarver can do without a chisel. The tool is the main tool of labor both for extensive work with wood and for fine manipulations. It all depends on the width of the blade, which is sharpened on one side and allows you to crash into the surface as parallel as possible to the plane. Effort to work with the tool is the pressure of the hand or the kick of the mallet, which depends on the density of the wood. From the ranking of the best chisels, you can see popular models for planing, embossed carving, making holes of various shapes, creating grooves and grooves.
Best Flat Chisels
This tool is used for direct entry into the wood, cutting, planing in a small area, creating rectangular grooves, chamfering and grooves. When choosing the important blade width, the material of the rod and the endurance of the body.
DYNAGRIP Stanley 0-16-878, 20 mm - with particularly sharp sharpening
This is the best chisel for the thinnest poddevaniya top layer of wood due to sharp sharpening. One-sided blade is made of high carbon steel, which gives greater strength under load.
Using this device, you can easily handle dense species such as beech, ash and oak. The hexagonal flat form of the rod provides the necessary rigidity so that the tool does not bend.
Pros:
- cutting width of 20 mm is optimal for removing the vast part of the upper layer, and for figure cutting with wide lines;
- a steel nick is provided at the end of the handle, therefore strikes with a mallet will not destroy the cover;
- the handle of a special shape allows you to firmly hold the chisel thanks to the grooves on the sides and two cavities for the stop with your fingers;
- working blade length 141 mm suitable for access to the grooves and work through the holes;
- weight of 250 grams is optimal for prolonged use and the brush will not get tired;
- sharpened like a razor, and she easily recovers after blunting;
- long handle suitable for people with large hands.
Minuses:
- the price starts from 550 rubles;
- The overall dimensions of 330x50x40 mm are quite large and inconvenient for frequent changing of the workplace and carrying the tool with you.
MATRIX Tiger eye 24503, 8 mm - for deep penetration
This is the best chisel for cutting deep grooves and grooves thanks to the through rod with the release of a nick in the back plate. This design allows you to hit the butt not only with a wooden or rubber mallet, but even with a steel hammer.
The blade width of 8 mm is suitable for shaped carving, creating a thin and deep relief. The stylish handle is called “tiger eye” due to the bright red color surrounded by black rubber, and it looks very impressive.
Pros:
- cost from 240 rubles;
- the rubberized grip will not slip out of sweaty hands;
- rod is made of 65 Mn alloy steel;
- the shape of the handle is extended in the center and narrowed to the edges, which follows the line of the compressed palm;
- light weight 240 grams;
- hardness of steel after quenching is 65 Hrc;
- the handle does not turn;
- long service life.
Minuses:
- The tool can only be used for grooves and grooves (planing will be too long due to the small width of the blade).
The best semicircular chisels
This type of tool is used for making patterns, creating round and oval holes, cutting grooves and grooves with smooth edge transitions, and longitudinal chamfering. When choosing an important blade width, type of handle and weight.
FIT 43143, 12 mm - the easiest option
This is the best semicircular chisel for cutting patterns and creating grooves that will suit both the beginning carpenter and the master. The cost of the tool is one of the most affordable and starts from 215 rubles.
The width of the rounded blade 12 mm is optimal for various types of work with wood. Thick grip with narrower part in front fits well in hand. The rubber surface is provided with pimples that hold the handle despite the sweat of the palm.
Pros:
- lightweight 130 grams is not felt even with prolonged use;
- blade width of 12 mm is suitable for creating various cuts and removing the edge;
- tool steel provides long retention sharpening and fracture strength;
- 250 mm length is optimal to work in the recesses;
- the price of 215 rubles is available to everyone;
- at the end of the handle a hole for hanging on the hook;
- cuts well;
- suitable for gas silicate blocks.
Minuses:
- you can only beat by hand;
- Comes from the store unzipped.
NAREX Super 2009 Line Profi, 14 mm - the choice of professionals
This is the best semicircular chisel for professional activity, because the material of its core is chrome-manganese steel, which perfectly keeps sharpening in everyday use. The width of the cutting part of 14 mm allows making cuts, holes, grooves.
The handle is equipped with a metal nickle, so it will not crack under the blow of a mallet and a hammer. Two-component substance in the handle provides a strong hold.
Pros:
- rubber ribs on the handle further increase the adhesion;
- hook hole;
- metal nickle hit by a steel hammer;
- blade hardening to a hardness value of 59 Hrc;
- 124 mm long tip allows work in recesses;
- comfortable for hands weight 176 grams;
- A total tool length of 250 mm is convenient for carrying around and handling in confined spaces.
Minuses:
- cost from 1000 rubles;
- not suitable for very fine woodcarving.
The best sets of chisels
This woodworking tool is also sold in ready-made sets, which allows you to purchase several chisels of various widths and shapes, already packed in a beautiful case for storage and allowing you to make narrow and wide grooves, planing, sampling.
When buying a set, it is important to pay attention to the number of chisels, the width range and the shape of the blades.
Stanley DYNAGRIP 2-16-888 - for convenient transportation
This is a good set of chisels for the master, who often have to change jobs. For transportation, a plastic case is provided in which all 5 chisels are placed in their compartments, which prevents rolling.
The cutting edge is provided with rubber covers to prevent damage to the interior of the case. A set of flat chisels has the same handles on all models, so the master is accustomed to take them with the usual grip.
Pros:
- The blade width range from 6 to 25 mm (including 10, 15 and 20 mm) is suitable for all tasks in carpentry;
- the weight of the entire set of 1.3 kg is easy to transport;
- compact dimensions of the set 300x300x50 mm;
- convenient handle of the case and a latch that prevents the contents from falling out;
- steel plugs on the ends of the chisel handles to hammer with a metal hammer;
- soft inserts on the handles and notches for the fingers, for a comfortable and strong grip;
- alloy steel will last a long time and keep an attractive appearance.
Minuses:
- the cost of a set of 1900 rubles;
- no blade widths of 8 and 12 mm, which often come in handy for shaped carving;
- weak factory sharpening that needs to be edited before use;
- On some rooms, the geometry of the bottom base is only suitable for rough carpentry.
Enkor 10401 1/6/36 - for a beginner carpenter
This is the best ready-made set of chisels for a novice carpenter due to the affordable cost of 400 rubles and the four most popular sizes of this tool: 10, 12, 16 and 20 mm in width.
The rods are cast of alloy steel, so they will last a long time. The cutting part is subjected to additional hardening.
Pros:
- attractive price from 400 rubles;
- thick grip for reliable grip;
- light weight of each chisel;
- 4 tools in a set;
- The blade is protected by a rubber cap.
Minuses:
- clumsy design;
- missing case;
- only suitable for softwood, and may get blunt from a knot impact;
- no width 6-8 mm for fine thread.
It will be interesting to friends too
