7 best circular saws

Circular saws are indispensable for professional repair and construction activities. With their help, it is easy to cut off a stone, tile, metal or tree, at which the process is carried out quickly and the cut is obtained absolutely smooth due to the large disc as a cutting element, eliminating deviations. We have prepared a rating of the best circular saws for longitudinal and transverse cutting of wood (timber and boards), cutting aluminum, brick, tile, MDF and chipboard, which will help to see the necessary parameters and specific models tested by users.

Top network circular saws

This disc tool is used at home, in the garage or on a workbench. When connected to the transfer, they can perform trimming work on the facade, but you should always remember about the wire. This is one of the most powerful types of cutting equipment.

DeWALT DWE 560 - has the most positive feedback

This is the best circular saw for home and cottage, as well as semi-professional activities due to the powerful motor in 1350 W, which provides a confident cut thick boards. At the same time, the mass of the saw is only 3.7 kg, which is one of the minimum indicators.

The tool has a lot of positive feedback from users who clearly recommend the product. On the one hand, they can cut the depth immediately 65 mm without turning the timber, which is suitable not only for creating shelves, but also helps to prepare racks for a gazebo or a bench.

Pros:

• a thick steel casing that slides back during the stop into the workpiece, which prevents injuries to the operator or damage to other surfaces during the instrument tray;
• the ergonomic handle with corrugations fits well into the hand;
• the raised front part of the platform ensures smooth gliding over the surface despite possible debris or knots;
• the transverse arrangement of the motor gives a short body and high maneuverability;
• the second mushroom-shaped handle allows you to more accurately guide and confidently hold the saw;
• lock start button;
• the ruler on the support sole helps to precisely cut in size;
• a disc diameter of 184 mm allows deep cutting through material up to 65 mm;
• It is convenient to connect the blowing of sawdust through the pipe for the vacuum cleaner.

Minuses:

• the cost of 6,700 rubles;
• no rpm adjustment;
• under load, the rotational force may vary;
• there is no smooth start;
• There is no place to connect the guide bus.

Interskol DP-210/1900 M - a professional model at an affordable price.

This is the best analogue of foreign saws, but at an affordable price. In this case, the equipment has a capacity of 1900 W, which makes it very productive.

The rubberized handle will not allow to drop the device from hands. The second handle is molded from plastic with rubber and has a curved shape for a comfortable grip and direction of travel.

The sole is adjustable in slope, which allows you to make cuts at 45 degrees and at a different angle, for which a scale is provided.

Pros:

• ruler from the operator to see the length of the cut in millimeters;
• folding cover closes the cutting disc by 90% when not in use;
• separate partition for the trigger with a finger to prevent slipping;
• the lock of the starting key during long cuts and preventing accidental start;
• the cost is 5,500 rubles;
• power is 1900 W;
• with a direct cut, it will turn out to be 75 mm deep;
• there are elements for connecting the guide rail;
• a long cable of 4 m will allow to work without carrying;
• when setting the platform at 45 degrees, the cut reaches a depth of 53 mm;
• disc diameter 210 mm;
• rotation up to 5000 revolutions per minute;
• You can connect the vacuum cleaner through the outlet in the casing.

Minuses:

• saw very heavy 6.2 kg;
• no speed adjustment;
• under load constant speed is not supported.

The best cordless circular saws

Such a tool is used in field activities, so as not to depend on the location of the sockets or not to carry an extension cord. Even with its help it is easier to block the roof or to carry out construction work in the attic, where there are fewer ways to place the carriage.

Bosch GKS 12 V-LI - for the master flooring

This is the best circular saw for the flooring professional. With its help it is easy to cut off laminate, parquet, plywood or PVC plates. The machine has a pistol shape with a rubberized grip. Management is carried out with one hand, which contributes to the weight of the device and 1.4 kg.

Compact saw is easy to manipulate in confined spaces. The change of the angle of inclination of the base plate is carried out with a screw from the end. Cutting depth is 26 mm.

Pros:

• battery voltage of 12 V gives acceptable power;
• at an angle of 45 degrees, it will be beautiful to trim the board with a thickness of 17 mm;
• The battery has a capacity of 2 A / h to store a charge, which is enough for a long time;
• short length 279 mm;
• comes with two batteries;
• there is a convenient suitcase for transportation;
• the device develops 1400 revolutions per minute;
• there is a dust extraction adapter and mount for the guide rail;
• The battery supports fast charging technology;
• The light shines exactly in the cut zone.

Minuses:

• the price is 12,000 rubles;
• 85 mm disc diameter will not allow to cut a thick timber;
• no adjustment of rotational speeds;
• hard to find wheels for metal (wood only).

DEWALT DCS576N - with brushless motor

This is the best circular saw for long-term work because it does not have brushes, which ensures minimum heating of the device and maintenance of the functional part. Rubber handle prevents slipping in sweaty hands.

The battery is placed on the end of the handle and provides optimal balancing. The second handle is fungus-shaped and helps guide the course. Changing the inclination of the platform is carried out not by a screw, but by a permutation of the groove, which is three times faster.

Pros:

• Stylish black and yellow design with a matte steel finish;
• separate cell for a finger with a trigger to prevent slipping;
• start button lock;
• adjustment of the shear force of the protective cover;
• lights for dimly lit areas;
• disk size 190 mm;
• durable brushless motor;
• weight 3.7 kg is optimal for long-term work;
• cutting depth at a right angle 61 mm;
• 5800 revolutions per minute provide high performance;
• at an angle of 45 degrees, the cut depth is 43 mm;
• capable of sawing 90 boards 50 mm thick on one charge;
• key fastening on the body for instant access to changing sawing equipment;
• strong plate for an emphasis.

Minuses:

• cost of 15,000 rubles;
• no batteries and charger included;
• length scale only on the lateral surface, for which it is necessary to bend over very much in order to glance during the cut;
• no keyless snap;
• turns are not regulated;
• shipped in box.

The best immersion circular saws

This tool is used both for work on the workbench in the workshop (for cutting boards from above), and for cutting holes in the middle of the material. This is achieved by the base plate and the adjustable distance from it to the edge of the disk, which sinks lower when the operator pushes.

Makita SP 6000 - crashes anywhere

Such a circular saw is the best in view of the convenience of rearranging the apparatus by the handle in the form of a clevis and a clear scale, which can be used to determine how deeply the disc has sunk into the material. The second handle helps to set the instrument precisely and press harder with a dense surface structure.

The base is adjustable as on a regular saw and can change the angle by 45 degrees, which will allow a ramp to cut.The disc is fully enclosed and the nozzle is connected to the back of the vacuum cleaner.

Pros:

• a lot of rubber pads on both arms;
• maximum user protection;
• 1300 W power allows you to crash into any material;
• depth at right angle is 56 mm;
• the device has a mount for working with a guide rail;
• in order not to knock the case off, a smooth start is provided;
• at an angle of 45 degrees, the slot reaches a depth of 40 mm;
• compact length of 341 mm;
• a disk with a diameter of 165 mm;
• under load, the motor does not lose speed;
• input for vacuum cleaner;
• the number of revolutions of 2000-5200 per minute;
• rotation is adjustable depending on density;
• stepless adjustment of a corner of a cut;
• motor overload protection;
• low vibration;
• work even in a vertical plane.

Minuses:

• cost 18,000 rubles;
• weight 4.1 kg;
• 2.5 m cable will need to be carried.

ELITECH PD1255P14 - with guide kit

This is the best circular saw for precision work, as it is sold together with a guide blade and clamps, which will allow you to install the tool on the work surface and make cuts in the designated places, which is especially useful in symmetrical work.

The saw itself has compact dimensions and a long handle, for which the unit can be taken with one hand. The upper part is covered with rubber bands and has a second support handle.

Pros:

• outlet for connecting a vacuum cleaner;
• durable metal casing;
• Includes guide bus 1400 mm long, two connectors and 2 clamps;
• 1200 W power to cope with any material;
• a disc diameter of 160 mm allows cuts to a depth of 55 mm straight and 41 mm at an angle;
• there are no backlash in the main nodes;
• all shafts rotate on bearings (not on bushings);
• high-quality plastic;
• compact case 340x260x235 mm;
• 5500 revolutions for productive work;
• disk size is common and easy to replace if necessary.

Minuses:

• the price is 11,000 rubles;
• on the second handle there is no rubber lining;
• weight 4.8 kg heavy;
• no disc brake;
• when docking tires can find a gap that will require trimming;
• the uneven sole can be caught;
• the cord is short and has a length of 2 m;
• no rotation adjustment;
• floating speed when the load changes;
• no soft start.

Top mini circular saws

A tool of this kind is in demand for minor works with finishing materials and is useful both for an on-site master and for a stationary repair site. Such devices are sold in a case and have a compact size for transportation.

Einhell TC-CS 860 Kit - for any small work with ceramics and plastic

This will be the best circular saw for non-thick materials up to 23 mm. The unit is able to cut through ceramics, wood and plastic, for which the complete set comes with three discs with the corresponding teeth and structure.

The equipment is very comfortable in the hand due to the curved shape of the handle with rubber stops at the top and bottom. The power button is located on the side and supports one-touch off (at the tip).

Pros:

• the saw can be used both for facing of cutting boards and tiles, and for longitudinal cutting of long cuts (for this purpose, a side stop with a scale is provided to maintain evenness);
• metal part of the body with gear;
• lock the desired depth of fit;
• the ability to perform immersion actions due to the progress of the disc;
• the nozzle for a vacuum cleaner will provide a minimum of chips;
• spacious case, where the saw, pipe, plate, keys and discs;
• reasonable price of 4900 rubles;
• power 450 W;
• straight cut depth 23 mm;
• weight 2 kg;
• quiet work;
• the configuration provides for the installation of the guide rail;
• rotation speed 6000 rpm;
• suitable for working with non-ferrous metals;
• built-in overload protection;
• work with one hand.

Minuses:

• turns are not regulated;
• cable length 2.3 m;
• in a collision with a dense material can reduce speed;
• Start key to the right, so it will be convenient only right;
• there is no smooth start;
• disc diameter is only 85 mm.

See also:

Top 5 Band Saws

7 best tile cutters

7 best electric jigsaws

8 best baby creams

8 best wall chasers

How to choose a garden pruner