Band saws are widely used in carpentry workshops and workshops associated with metal processing, so this equipment is divided into several categories. Autonomous models are used when laying various communications. Moving on the cylinders or rotating in a circle canvas provides high cutting accuracy, unlike grinders and other tools, which ensures good quality of subsequent products. From the ranking of the best band saws, you can see the most suitable equipment for working with pipes, solid casting, curved and straight cut of wood, as well as for crossing activity, which will help to make a more informed choice.
Top band saws for wood
Such equipment is produced in the form of small or large machines and is used in carpentry workshops.
The movement of the cutting element is carried out in a circle on the pulleys, which evenly and quickly acts on the material. When choosing, it is necessary to pay attention to the speed, the size of the table and the possibilities of its inclination.
JET JBS-12 - for wide boards and beams
This is the best band saw on wood for straight cutting or shaped cutting from thick workpieces, because the maximum sawing width is 300 mm.
A power of 800 watts allows you to cut dense woods such as beech and ash. Two compartments with pulleys are securely closed with metal doors. To start there is a large button at the table level, which is turned off from the clap of the palm.
Thick metal frame allows you to place the workpiece on it, and is not deformed by stress or vibration.
Pros:
- The compact dimensions of the machine 640x490x1110 mm, supplied already with a set of legs, allow the equipment to be installed vertically at the required height when occupying a small area;
- rubber pads on the legs will not allow the saw to slide from vibration;
- on the frame there are grooves for the institution of a parallel stop, providing even long cuts;
- In the other groove, you can insert an angular stop, on which the position changes in degrees and scale, and is pressed with a lock to make blanks for joining at an angle;
- two speeds of the device for various materials on density;
- the frame can move with an inclination of up to 45 degrees, which is regulated by an additional rotation of the handle and lock;
- the device works from the household socket and voltage of 220 V;
- the tape moves at a speed of 800 m / min;
- 2240 mm long fabric will not wear out longer;
- cutting width 300 mm and depth 180 mm;
- knot of a stretch from metal;
- can be installed cutting element with a cross section of up to 15 mm;
- easy stretching of the canvas with the handle on the front;
- Aspiration holes with a diameter of 100 mm can be made on the unit.
Minuses:
- machine weight 60 kg will require two people to transport and install;
- speeds are switched by throwing the belt from one pulley to another, which requires time and skill;
- cost from 41,000 rubles;
- grooves in the frame 10 mm wide, and bolts 8 mm, which will require washers, which are not included.
Enkor Corvette-35 - power and speed
This is the most suitable band saw for a workshop with a large amount of work, since the apparatus has a capacity of 1000 W and a belt speed of 900 meters per minute, which allows you to quickly cut various wooden pieces, as well as plastic.
The machine is implemented with a stand on high legs. The bevelled part of the upper frame allows the workpiece to be raised high enough to create the most complex shaped cuts.
Pros:
- wide desktop 400x548 mm is convenient for placing large workpieces and the wizard’s palm rest;
- the off button is located at the level of the table and it can be easily pressed even by the elbow;
- all rotating elements are covered with a metal casing;
- roller support tape to prevent jamming or breakage;
- the kit includes a stop for parallel cuts and a protractor to create slanting cuts;
- the frame can change the position from 0 to 45 degrees, which is carried out by rotating the handle and allows you to perform complex cuts;
- compact dimensions of the entire machine 1150x370x520 mm;
- 2 speeds, so as not to create excessive load on the engine;
- power supply from 220 V;
- tape width up to 19 mm;
- You can connect a vacuum cleaner for chip extraction;
- cutting depth 200 mm;
- blade rotation speed 900 m / min;
- tape length 2490 mm;
- included allen key for assembly.
Minuses:
- cost from 42,000 rubles;
- weight 65 kg;
- the belt drive needs a rearrangement of the belt, which takes time;
- pulleys without connecting to a vacuum cleaner are quickly clogged with sawdust.
Top band saws for metal
Such equipment has a blade with teeth for cutting metal, plastic and other hard materials, but the movement of the saw is carried out not round, but back and forth, which is provided by the engine and sometimes hydraulics. At the choice power and depth spent on drink are important.
JET J-349V - light and productive
This is the best metal band saw for a home workshop or a small workshop due to its compactness and lightness, which will allow you to transfer it to the place where you have to cut a large amount of workpieces, and not spend time carrying material to the machine.
The device is capable of sawing steel up to 125 mm thick. The machine is controlled manually, for which the operator must press the handle, which presses on the saw frame and simultaneously starts the movement of the blade.
Pros:
- weight 19 kg is convenient for transportation;
- powerful steel sawing frame;
- when you release the handle, the frame itself goes up;
- trigger trigger is made along the entire length of the handle and is clamped automatically with natural grip;
- powerful vice for fixing the workpiece;
- frame rotation at an angle with precise setting of the degree on the scale;
- easy stretching of the blade with the screw in front;
- end support for the workpiece, so that with a large departure it is not shifted;
- rubber feet prevent slipping on the floor from vibration;
- power supply from 220 V;
- 1000 W power allows you to quickly cope with a thick workpiece;
- compact dimensions 650х310х450 mm;
- belt speed of 80 m / min gives high performance;
- smooth change of turns by the switch on the case does not require disassembly and rearrangement of the belt on the pulleys;
- forced liquid cooling is present;
- drank at a right angle of 125 mm, and under a slanting 80 mm;
- change the angle of the saw frame from 0 to 60 degrees.
Minuses:
- the cost of 35,000 rubles;
- constant pressure from the hand of the operator is required;
- the handle of the vice can interfere with lowering the saw to the end;
- the cloth in a set is quickly erased.
Enkor Corvette-422 - saws without pressure from the operator
This is the best band saw for metal for a workshop with a large amount of work, since it cuts under the pressure of its own weight of a powerful frame and does not need operator effort.
The workpiece is inserted into the vice, the power is turned on with the side toggle switch and the frame is lowered. At the end of the cut, the automatic pressure is triggered and the toggle switch is turned off.
The machine comes on high legs that do not require a table. Movement is very convenient with attached wheels to the rear.
Pros:
- the cost of 25,000 rubles is one of the most affordable products in this category;
- a vice fix a detail directly and at an angle from 0 to 45 degrees;
- quick installation and stretching of the cutting element;
- support rollers for web;
- connection to a 220 V outlet;
- 550 W is sufficient for operation, but economical in terms of power consumption;
- cutting depth straight 115 mm, and at an angle of 70 mm;
- the tape moves at a speed of 50 m / min;
- compact dimensions 990x335x365 mm;
- 3 speeds for different materials (cast or shaped tube).
Minuses:
- speeds are switched by shifting the belt on the pulleys, which requires disassembly of the case;
- the handle for lowering the frame is metal and without rubber linings;
- weight 54 kg;
- no cooling.
Top Battery Band Saws for Metal
Such tool is applied during the work on departure where it is required to cut pipes. In contrast to the grinder, the edge is very even and does not require further processing, which is important for welding or threading.
Bosch GCB 18 V-LI - to work in all spatial positions
It is the best cordless band saw for trimming metal pipes, angles or bars, even if they stick upright, are at a height or angled.
The tool has a grip bracket that gives a good grip with one hand. The motor is located on the bottom and the battery on the top. The canvas is held in a fork with metal rollers, which allows you to freely bring it at any angle to the workpiece.
Pros:
- cost from 15,000 rubles;
- rubberized handles;
- start key lock to facilitate long cutting;
- Compact dimensions of 375x210x200 mm are convenient for one-hand operation;
- belt speed 162 m / min;
- the saw is capable of cutting 63 mm in depth;
- it is possible to replace a cloth without key;
- weight 3.8 kg;
- in low light there is a backlight;
- turns are regulated by the force of pressing the trigger;
- complete 2 canvases.
Minuses:
- sold without battery;
- only 1 speed;
- comes in a paper box.
It will be interesting to friends too
