Circular saws are powered by an electric motor that transmits torque to the gearbox and the cutting element - a disc with teeth. The latter is made of steel, diamond and alloys, which allows cutting materials of different density. The tool is classified on manual and fixed on a workbench, household and professional. We propose to study the rating of circular saws of all models (submersible, standard network, battery and mini tools), which will help to choose equipment for longitudinal and transverse cutting, cutting laminate and parquet, cutting non-ferrous metals and tiles.
Content:
Top Immersion Saws
Such a tool is used when working on a material when a cut is needed not from the end or edge, but further. The immersion saw is mounted on top and is cut by lowering the rotating disc.
After the operation, he rises in the protective compartment. This is required when laying floors or cutting holes in wooden materials.
Bosch GKT 55 GCE - for professional use
This is the best submersible circular saw for everyday use and a large amount of work, because its motor power is 1400 watts. This allows sawing materials of any density, including non-ferrous metals and oak wood.
The tool is equipped with a convenient lock for tilting the angle of the disk, as well as a scale showing the depth of cut by 57 mm. The main handle is covered with rubber to firmly hold the saw in your hand. The second handle facilitates pressure, but the device can be operated with one hand.
Pros:
- at right angles, the device cuts to a depth of 57 mm, and when inclined 45 degrees it cuts up to 42 mm;
- speeds are electronically regulated in an amount of from 3,600 to 6,250 per minute;
- the nozzle for a vacuum cleaner helps keep the workplace clean and clearly see the cutting line inside the bed;
- high power 1400 W;
- the housing has grooves for connecting the tire and controlling the movement flatness;
- the disc runs smoothly without jerks;
- diameter of the cutting element is 165 mm, and the size of the mounting socket 20 mm makes it easy to find this consumable material on sale and replace it;
- under load, the system itself controls that the turnovers do not fall;
- quick change of the angle of the throttle valve;
- built-in ventilation;
- spindle lock button helps to instantly change the snap.
Minuses:
- cost from 29,000 rubles;
- weight 4.7 kg can overwork the hand when working on a vertical plane;
- the scale of the angle of inclination has inaccuracies, so for exact details installation will be required by a protractor;
- noisy work;
- the flange does not allow placing discs thicker than 1.2 mm;
- when pulling the wings, the washers are shifted, which slightly knocks down the set size.
Makita CA5000XJ - frezer for frequent moves
This is the best circular saw for those who often change jobs. The tool is in demand among the masters of the manufacture and installation of metal structures at home at the customer (sandwich panels, decorative elements).
A systainer is provided for transportation, and compact packaged dimensions are 395x295x320 mm. This model has become a hit in sales in 2017 due to the high power of 1300 W, optimal size and milling function, which allows you to choose the surface to create a pattern or give a special shape.
Pros:
- quick replacement of brushes through unscrewing plugs;
- wide steady bed;
- both arms are rubberized;
- connecting the vacuum cleaner completely cleans the workplace;
- possibility to operate with one hand;
- connection to the guide rail;
- adjustment of turns from 2600 to 6400 per minute helps to select the rotation speed depending on the type of material;
- when pushing a disk with a dense surface, the rotation speed does not slow down;
- cuts and mills aluminum and other soft metals;
- high cutting accuracy;
- Included is a hexagon to replace the tooling.
Minuses:
- weight 5 kg;
- cost from 26,000 rubles;
- 2.5 m wire will require an extension cord;
- disc diameter of 120 mm, which allows sawing a small depth of up to 11 mm;
- with frequent use of the tire, excavations appear on the sole.
Top Network Standard Circular Saws
This equipment works both with tires and separately, and is used for cross and longitudinal cutting of wood and soft metals.
Most often, work is carried out in the workshop on the workbench, but it is allowed to go outside the room with an extension cord. When choosing important power and diameter of the disk.
DeWALT DWE 560 - for high-altitude work on the roof
This is the best circular saw for trimming rafters and trusses on the roof, as well as attic floors due to the light weight of 3.7 kg, which is rare in such a tool.
It is possible to work with a saw with one hand. The transverse arrangement of the motor gives compact dimensions of 286x226x205 mm, and a disc with a diameter of 184 mm allows cutting thick timber and boards.
The device has a power of 1350 watts. For a firm hold and pressure, the handle is provided with a protrusion in front of the trigger. The protective mechanism completely eliminates the ingress of objects on the disk from the upper side.
Pros:
- lightweight disc with slots inside;
- second handle to increase the force when pressed;
- air ventilation system at the end of the engine;
- scale and clamping lamb to change the angle of inclination;
- self-closing casing;
- cost from 8100 rubles;
- power is 1350 W;
- easy brush replacement;
- ruler with parallel stop;
- a disc diameter of 184 mm allows cutting at a right angle up to 65 mm, and with an oblique installation up to 42 mm;
- rotation with a speed of 5500 rpm;
- in a set key for change of equipment;
- nozzle for vacuum cleaner.
Minuses:
- there is no possibility to connect the bus;
- Comes in a paper box without a case;
- no smooth start, which complicates the exact beginning of the cut;
- turnover under load float;
- rotational speed is always at the maximum.
AEG KS 66-2 - with fast fixing of all elements
This is the best circular saw for those who often change the shape of the cutting angle or move from one material to another, because the tool has a fast locking screw to adjust the angle, which is changed in two taps.
In order to change the saw rig, a spindle lock is provided. The position of the protective casing and the smoothness of its removal are also regulated by a clamp under the main handle. The saw is convenient for precise control of the cut due to a detailed non-erasing scale on the frame.
Pros:
- the handle is covered with rubber pads with a bumpy surface;
- motor ventilation system with chip protection;
- cost from 8200 rubles;
- a separate finger box with a trigger to prevent slipping;
- a thick bed with a raised front moves easily through the material;
- the scale of degrees and a ruler of length are deeply put and will not be erased from long use;
- comes with a sturdy bag for transportation;
- completely rubberized second handle;
- 1600 W power will cut any material in density;
- speed of 5800 per minute;
- cutting depth 64 mm at a right angle and 47 mm at an angle;
- clearly seen the place saw;
- Comfortably in the hand.
Minuses:
- weight 4.8 kg;
- floating speed under load;
- work with the guide bus only through an adapter;
- rotation speed is not adjustable;
- a sharp start;
- no stiffeners on the base;
- without connecting to a vacuum cleaner, all sawdust will fly to the operator.
Best cordless circular saws
A battery operated tool is used for short cuts in conditions of impossibility of connecting to electricity or frequent changing of the workplace.Important parameters of choice will be the battery capacity and the size of the saw equipment.
Ryobi ONE + R18CS-0 - for thick plywood
This is the best circular saw on batteries, well suited for the dissolution of thick sheets of plywood, which can be cut in one pass, laid in two layers, with a total thickness of up to 52 mm.
The device interacts with any battery of the same company, with a voltage of 18 V, so if you already have a Ryobi tool on the battery, you can save money, because the saw itself costs from 5,000 rubles.
Manufacturers provided it with a comfortable ergonomic handle for right-handed operation and an auxiliary stop.
Pros:
- the nozzle for a vacuum cleaner rotates and has a curved shape, which is convenient for removing the hose from the user's body;
- plastic folding case;
- change of cutting angle on the scale without additional use of the protractor;
- price from 5000 rubles;
- the handle is completely covered with rubber;
- the battery is located on the side below the handle and does not interfere with the main manipulations;
- rubber start button;
- common bore diameter;
- rotational speed 4700 per minute;
- comfortable weight 2.4 kg;
- on one charge makes up to 275 transverse cuts of a bar 100x50 mm;
- Improved tooth geometry for accurate dissolution;
- cutting depth at a right angle of 52 mm, and under an oblique 36 mm;
- easy brush replacement;
- compatible with all types of batteries of the same manufacturer.
Minuses:
- comes in a paper box;
- no batteries included;
- thin sole.
Einhell TE-CS 18 Li - for precise parallel cuts
This is the most suitable circular saw for precise parallel cuts due to the possibility of connecting the side stop.
On the scale of the perpendicular ruler, you can set the specified width and fix the position. This technology works when tilting the disc and cutting at an angle.
The shape of the body allows you to maximize the natural pressure and weight of the hand while holding the saw to ensure the movement of the tool and prevent scoring from rotating the disk.
Pros:
- fully rubber grip handles;
- trigger lock to prevent accidental start;
- illumination on the casing, precisely directed to the cut zone, allows to work in poorly lit rooms;
- cost from 5000 rubles;
- keyless rearrangement of a parallel emphasis and a tilt angle of a saw;
- branch pipe to remove sawdust in the vacuum hose;
- strong bed;
- Lightweight 2.34 kg is convenient when upright;
- rotational speed of 4200 rpm;
- cutting depth of 48 mm at a right angle and 32 mm at 45 degrees, due to a disc diameter of 150 mm;
- Compact dimensions of 315x200x285 mm are convenient for transportation.
Minuses:
- no battery included;
- there is no electronic adjustment of turns;
- a key is required to replace the saw blade.
Top Mini Disc Saws
This compact tool is used to cut non-thick materials, such as floor coverings made of wood, ceramics or metal decorative elements. Most of the structures are equipped with a vertical disc stroke for cutting from above.
Einhell TC-CS 860 Kit - to work with all materials at once
This is the best disc mini-saw for picking, as it comes in a sturdy plastic case, convenient for transportation, and also comes with three discs for cutting ceramics, metal, and wood with plastic.
The tool is equipped with an aluminum frame with a vertical disc stroke and adjustable cutting depth. The launch is carried out by a button on the side, which is easily fought off when turned off with one touch.
Pros:
- metal housing around the gearbox;
- folding spring to return the tool up after making a cut;
- cost from 5000 rubles;
- rubber top and bottom for a firm grip;
- parallel stop with adjustable departure length;
- setting the depth of cut on the scale;
- small dimensions of 366x252x111 mm;
- weight of 2 kg will not tire a hand;
- connects the vacuum cleaner;
- 85 mm disk to cope with floor tiles, laminate flooring.
Minuses:
- no cut angle change function;
- the power button on the right will be inconvenient for left-handers;
- 450 W power may cause the disc to slip on too thick material;
- constant speeds under load are not supported;
- there is no smooth start;
- 2.3 m short cable
Dremel DSM20 - the most compact in its class
This is the smallest mini disk saw. Its size is 330x80x90 mm. At the same time, it is equipped with a disk with a diameter of 200 mm, which makes it possible to cut even a brick with a turn to the side.
The tool does not have a protective lower casing, but only the upper one, but it supports the submersible type of work with lowering the disc. The trigger is made in the form of a large plate along the body, which the fingers press with a natural grip.
Pros:
- Lightweight 1.7 kg is convenient for carrying in a bag, and for long work;
- 200 mm disc allows you to cut through the material to a depth of 22 mm;
- the longitudinal location of the motor gives a thin body, which can crawl into a hard-to-reach place;
- power is 710 W;
- complete transportation case;
- rotation starts smoothly;
- speed - 17000 rpm;
- the nozzle for the vacuum cleaner is connected to the side;
- hole for mounting a parallel stop;
- spindle lock;
- The depth scale cut on the side of the case.
Minuses:
- cost from 7000 rubles for a small tool is great;
- 108 dB loud work;
- change disk drive key;
- plastic housing, including the casing around the gearbox and the frame;
- cannot be installed at an angle.
It will be interesting to friends too
