Miter saws are driven by electricity and transmit torque to the gearbox with the shaft and the cutting disc. The tool always has its own base on which the blanks are fixed. Depending on the configuration and functionality they can cut wood, plastic, aluminum, and create complex shapes on the ends to connect parts at different angles. The rating of the best miter saws will help to see the models that have already been tested and their specific characteristics for various tasks.
Best Network Miter Saws
This equipment is for stationary workshops for the manufacture of furniture, including the finishing of rooms from elements with non-ferrous metals. Saws are located on the table or the floor, and their parameters are selected based on the size of the parts and the desired degree of difficulty of the cut.
Metabo KS 216 M Lasercut - for home workshop
This is the best miter saw for making various furniture at home for your family and relatives due to the affordable price from 7,800 rubles and many auxiliary functions required for a beginner.
The tool disk is completely covered with a plastic shield that rises only when the cutting element is brought to the part.
The laser projects on the workpiece exactly where the cut will be made. The backlight allows you to perform manipulations well seeing the trimming area.
Pros:
- thoughtful power key that automatically shuts off when released;
- there is a rear nozzle for connecting the bag with garbage, which is included, so that the workshop will always be clean;
- the design is established on 4 legs with wide rubber slips;
- the powerful engine of 1100 W gives high performance;
- when cutting at right angles, the depth is 60 mm and the width is 120 mm;
- when installing the part at 45 degrees, the cut reaches 45 mm in depth and 80 mm in width;
- fast replacement of brushes through the service channels;
- the table rotates to both sides by 47 degrees;
- rotation up to 5000 rpm;
- a mass of 9.4 kg is acceptable for transfer and gives stability during operation;
- the disk has a diameter of 216 mm and is able to bend with the frame on the sides, which is fixed behind the clamp and allows you to perform complex cuts;
- rubber grip on the handle reduces recoil.
Minuses:
- the handle is rather thick and will be uncomfortable to grip a person with small hands;
- at start the saw strongly twitches;
- turns are not regulated;
- Cutting depth is not set at all (only visually by the operator).
DeWALT DW 713 - for large timber
This is the most popular miter saw for large timber due to the presence of a disk with a diameter of 250 mm, which allows cutting wood to a depth of 89 mm and a width of 162 mm at a right angle.
Two handles are designed for comfortable lowering of the frame when cutting and convenient transfer of the device in the folded state.
The protective cover opens at the very last moment when the disc is lowered and closes immediately when the frame is raised.
Pros:
- powerful 1600W motor to cope with any density of wood;
- a large number of revolutions (5000 per minute);
- when cutting at an angle of 45 degrees, a depth of 89 mm and a width of 114 mm are possible;
- in a set a dust collector and a key for change of a disk;
- the table is pressed with latches and can move left and right relative to the cutting element;
- weight 13.6 kg is available for transfer;
- compact dimensions 485x600x425 mm easy to place on the table;
- the saw frame leans to the right and left up to 48 degrees, which is precisely controlled by an applied scale;
- if necessary, the base can be attached to the table for less vibration through the holes provided in the design.
Minuses:
- cost from 19,000 rubles;
- rotational speed is always at the maximum and is not adjustable;
- no horizontal movement;
- precise laser guidance on the cutting line is not provided;
- no backlight and smooth start.
The best cordless miter saws
Such equipment is used during relocation work, where adjustment of parts at the installation site is required. The presence of the battery allows you to use the saw regardless of the distance of the outlet and not to carry with you constantly a bunch of carriers for different tools.
Ryobi EMS190DCL - productive kid
This is one of the most compact miter saws on the battery, and therefore the best for frequent workplace changes. Its weight is 7.4 kg, which makes it easy to transport.
The dimensions of the saw 490x335x330 mm fit freely in the trunk of a passenger car and are located on a small table. In this case, a disc with a diameter of 190 mm allows making cuts with a depth of up to 38 mm and a width of 108 mm.
Pros:
- comfortable rubber grip that will not slip out of the hands;
- dual launch system eliminates accidental pressing;
- durable plastic cover on the disk is always closed in the raised position of the frame;
- the cost of 12,000 rubles when considering autonomy is optimal;
- when interacting with the battery at 5 A / h, you can work all day at full power;
- the equipment is equipped with clamps for blanks both from above and from the side;
- a laser with precise guidance of the cutting line is provided under the disk;
- rotational speed of 4500 rpm;
- the depth and width of the cut at an angle of 45 degrees is 38 and 95 mm, respectively;
- bag for collecting sawdust;
- the inclination of the saw frame on the sides with fixation.
Minuses:
- There are no batteries in the kit and they will have to be purchased;
- battery charging time of 5 A / h will be 3 hours;
- sharp start of the disk;
- the table is regulated only in the left side;
- turnovers are always at maximum;
- no backlight.
Metabo KS 18 LTX 216 - complete set
This is the best option for a regular workplace change due to the presence of a battery with a capacity of 5.2 A / h, which will allow you to work autonomously all day. A disc with a diameter of 216 mm allows you to cut a thick timber 60x120 mm.
Lateral dilators leave from the basis and increase the basic area for long preparations. The battery is mounted on top of the motor and does not interfere with handling. The upper clamp fixes the cutting part and has a system of quick size permutations.
Pros:
- rotation of the table in different directions for oblique cuts;
- rotate the saw frame on the axis for complex cutting at a vertical angle;
- rubberized part of the handle outside;
- hidden system of raising the protective cover;
- the dust collector will help to leave a minimum of garbage after work;
- Includes 2 batteries with a capacity of 5.2 Ah;
- laser projection of the cutting line;
- lights illuminate the entire platform;
- weight 9.6 kg;
- sawing at an angle of 45x80 mm;
- 4200 rpm shaft rotation gives high performance;
- blocking the saw head;
- scale with a large section;
- charge level indication.
Minuses:
- the trash bag has a small capacity and you need to empty it often;
- no handle for shipping position.
The best miter saws with broach
Such saws are used on large wooden elements, where the design provides for the movement of a motor with a disk on a tire or metal guides, which allows the cutting element to be pulled further than standard models. The key here, besides power, is the width of the cut.
Jet JSMS-10L - for wide boards
This is the best trimming saw with a broach for the carpentry workshop, where wide boards are used, because a 254 mm diameter disk and a broaching mechanism allow cutting materials up to 305 mm in width, at a depth of 90 mm.
For smooth movement of the protective plastic casing, a rubber ring is provided at its end, rolling over the extension part of the platform for a long cut.
Pros:
- comfortable grip with rubber pad;
- second carry handle;
- retractable side supports for table extensions;
- latching degree lock for uniform parts;
- low vibration due to stiff construction;
- electronic engine brake;
- indicating the future cut line with a laser;
- detailed scale for tilting and turning;
- nozzle and dust collector for quick cleaning of the working area;
- fixed shipping position when folded;
- fastening to the table for dragging stiffness;
- power is 1500 W;
- the depth and width of the cut at a right angle of 90x305 mm, and under an oblique 45x215 mm;
- 4500 rotation per minute;
- cutting depth adjustable.
Minuses:
- cost from 14,500 rubles;
- no backlight;
- a sharp start of disk rotation;
- tilt saw frame only to the right.
Einhell TH (TC) -SM 2131 Dual - with an affordable price
Such a miter saw will be the best for those who want to get a tool with a broach function and save, because the price of the device is 8500 rubles.
The motor has a power of 1500 W, and the disk in the kit is supplied with 48 teeth and is able to cut boards 310x62 mm. This is one of the few saws that maintains constant rpm under load due to the increase in power at peak times up to 1800 watts.
Pros:
- the case is deflected to the right and left by 45 degrees;
- rotation speed 5000 rpm;
- horizontal movement allows you to cut through materials with a thickness of 310 mm;
- vise clamps the parts at an angle where it is possible to cut through the section 210x36 mm;
- disk with a diameter of 210 mm;
- cutting depth is precisely adjustable;
- laser shows where the saw touches the material;
- weight 13 kg is convenient to carry;
- transport handle on top;
- waste container included.
Minuses:
- no additional lighting of the working area;
- there is no smooth start;
- cable 2.3 m;
- thin frame shakes during operation;
- rotation speed is not adjustable.
It will be interesting to friends too
