No workshop or enterprise can do without pliers. Even if manufactured products are not connected to wires and voltages, this universal tool is always useful when repairing other equipment, repairing outlets, an extension cord, or a lock. The second common name for the device is pliers. They are used by both professionals and amateurs. We have compiled a rating of the best pliers, so that users can choose the best models for gripping and holding thin and thick materials, cutting wires and wires of different diameters, mounting and disassembling fasteners.
The best professional pliers
Professional models are characterized by high insulation class up to 1500 V, so that the master can freely use them on installations with increased voltage. An important role is played by an alloy of metal, which provides strength and preservation of the shape of the metal structure.
Use the best professional pliers at substations, in the repair of wiring and electrical equipment. The second area of their application is the assembly and disassembly of parts not energized.
KNIPEX KN-0306160 - withstand up to 1000 V
These are the best pliers for working with high voltage, because their design maximally protects the master from electric shock.
Rubber covers on the arms clasp the metal parts to the most swiveling connecting element. High sides in front of the hinge reliably prevent contact with bare wires, even if the user's hand accidentally slips off.
Pros:
- double insulation withstands AC voltage up to 1000 V, and DC up to 1500 V;
- jagged part with a semicircular neck allows you to clasp the objects tightly;
- narrowed lip shape so that it is comfortable to underlay in hard to reach places;
- high-quality German assembly without a backlash in the hinge;
- before the stops on the handles, small depressions are made to increase the coupling of bare hands with a rubber coating;
- side knives are well cut and sharpened for cutting the cable;
- Light weight is convenient for work within 6-8 hours;
- It is convenient to carry an electrician in a regular pocket of clothes to quickly remove if necessary.
Minuses:
- there are no cutters on the side for precise cutting without bends;
- no prongs on the back of the handles to break old fixtures;
- a length of 160 mm may be insufficient in narrow boxes and panel lockers;
- cost from 2100 rubles.
NWS CombiMax 180mm, C5.2, H2.2, K12 - for panel board assembly
These are the best pliers for assembling metal boxes and electrical paneling, as well as internal equipment when connected, where a lot of installation work is required with bolts and nuts. Reinforced lever transmission and model length of 180 mm provide a firm grip on any element.
The function of the side cutters is combined with a toothed crimping, which makes it possible to firmly fix parts. At the ends of the arms protrusions are provided on which it is convenient to rest against the little fingers to separate the lips with one hand.
Pros:
- multi-component coating of the handles provides good adhesion to the skin of hands at any ambient temperature and possible sweat;
- 180 mm length is convenient for pressing on the levers and a strong girth of fasteners;
- tool steel with additional quenching in oil;
- the shape of the handles is optimal for reducing brush fatigue
- weight is 240 grams;
- narrowed lips;
- reinforced part with toothed grip;
- notches on the rubber cover from the back and the inside;
- 3 types of teeth size on lips for different size and shape of the part.
Minuses:
- cost from 1500 rubles;
- no antistatic function;
- the coating weakly protects against electric current, therefore, it is possible to work with the tool only when the voltage is off;
- no lateral incisors.
STANLEY CONTROL-GRIP 200mm - with the most convenient grip
This is one of the most popular types of pliers, in which the average cost is combined with a very comfortable grip. The structure of pens for this is thought out to the smallest detail. The place of an emphasis of a thumb is supplied with small rubber corrugations that exclude sliding.
The area, which affects the little fingers, for divorce and information, provided with a similar coating. But the middle of the handle has wide hard grooves to ensure maximum compression of the levers.
Pros:
- two-component handle-covers with a well-designed corrugated shape for a firm hold;
- 200 mm length is convenient for access to narrow areas;
- a strong squeezing of the levers allows snacking thick wires and wire;
- carbon steel sponges tolerate high temperature, which allows them to be used as a device for the welder;
- in addition to the side cutters and the teeth, there are teeth on the back side of the hinges on the lips, which is convenient for twisting small, but rusted nuts;
- easy move to open.
Minuses:
- the coating is not dielectric;
- there is no function that prevents the accumulation of static electricity;
- no stops before the joint;
- a mass of 400 grams can aggravate the brush during long-term fine work with wires;
- due to the lack of large teeth it is impossible to unscrew the large bolts and nuts.
The best household pliers
Every household should have a household tool to repair an outlet, a stove, or home appliances. Such pliers have affordable cost and minimal functionality. It is necessary to choose them according to the length, types of cut and methods of crimping.
NIH 2212-1-20 - one of the most affordable
These are the best household pliers, which cost from 295 rubles, but at the same time have sufficient functionality and build quality. The side cutters are well-knit, which allows even a thin wire to be bitten without the lengthy twisting of the latter.
On the narrow part there are cutters for cutting wires to exact dimensions. The handles are equipped with high stops, which prevents the hands from slipping during the long holding of the object and the sweat of the palm.
Pros:
- outside the covers are covered with numerous protrusions along the entire length so that the hand does not slide;
- lips have a sloping shape for narrow spaces;
- tool length 200 mm provides both access to the remote elements in the box, and strong clamping at the expense of large levers;
- the cost of 295 rubles is acceptable for any budget
- high stops in front of the hinges;
- weight 290 grams, despite this length;
- small curves at the ends of the handles are optimal for holding the pliers when working in the lower position;
- notches on the lips do not crumple from prolonged use;
- steel does not rust, even if periodically work with plumbing and water;
- suitable for rough and dirty work.
Minuses:
- on the inside, the covers are completely smooth, which can make breeding difficult;
- clumsy outdated design;
- plastic handles are not dielectric;
- covers can fly off, so they will have to be fixed to the mounting foam or glue;
- there is a backlash on the hinge;
- handles fall ill in hand.
Ombra 400107 - with a soft stroke
These are the best pliers with a soft stroke due to high-quality lubricant, which is initially a lot in the hinge. The tool is pleasant to work with fine details, where the breeding of the lips is easy, which allows you to perform many short manipulations without an excessive load on the brush and little finger.
High stops in front of the hinge provide the correct position for the big and middle fingers, preventing slipping.
Pros:
- two-component coating with a more tenacious rubber part on the pressure side of the hand;
- 5 teeth on each side of the arc grip;
- metal is not afraid of moisture and tolerates storage in an unheated garage;
- high stops in front of the hinge;
- tight lips to capture small parts;
- the teeth do not bend from a strong clamp;
- cost from 400 rubles;
- 180 mm length gives access to narrow structures;
- side knives practical snacking wire with a cross section of 0.6 to 3.0 mm;
- weight 200 grams.
Minuses:
- no end cut;
- there are no notches on the metal part behind the hinge to loosen small old nuts;
- rubber-polymer linings do not protect against high voltage.
It will be interesting to friends too
