12 best construction pneumatic pistols

Sometimes, in everyday life requires a pneumatic pistol, which can perform minor work. For professional builders and repairmen, such a tool can significantly reduce the time required for installation and finishing of various large-scale projects. Unlike power tools, pneumatics does not contain complex microcircuits, and it is repaired much faster and cheaper. Compressed air pneumatic pistols from the compressor are divided into several types: for driving nails, for blowing volume surfaces or voids, for sandblasting, and for applying lubricants or paints. Although they all work from the air and belong to the construction inventory, between them there are clear differences in functionality. After reading the material below, you can understand the essence of each type of tool and choose the appropriate model for upcoming work.

The construction pneumogun of which company to choose

Quality tools and experience of the master - the key to a good result of future work at the construction site. The first is provided by many companies whose specialization is tools and devices for repair and installation.

Among the manufacturers of pistols working from a compressor and used in construction are the following:

1. Matrix

2. Miol

3. Forte

4. Makita

5. Intertool

The German brand Matrix has many offices in different countries. The quality of products is constantly monitored in laboratories, and the design and convenience of the forms are constantly being improved. Manual pneumatic pistols from this company are often used in the finishing work of well-known contractors.

The company Miol originates in 1991, and today has offices in Russia, Shanghai, Belarus, Ukraine and Moldova. Although the company's slogan is “striving for perfection”, the manufacturer tries to keep the affordable cost of its products.

Intertool is widely known in the CIS countries, because it has more than 4,000 products, including pneumoguns for the rack. The development team constantly checks every new model in several stages so that there is no doubt about its reliability and efficiency.

The Asian market has been representing Makit for more than 100 years, with about 1,000 tool names in its arsenal. Its plants are located not only in the East, but also in Germany, England and Romania.

The best air guns for nails

When fixing wooden elements of the ceiling or parquet, in the laying of lining or construction of temporary fencing speed is important. A pistol with automatic feeding of nails and driving them in with pressure from a compressor removes each individual nail from hitting and hitting it with a hammer. Here are the best representatives of this group of tools according to the owners.

4PRO CN55 - for a large amount of work

This model stands out for its capacious round drum for nails. Straight oval handle has a rubber interlayer and holds well in your hand. The trigger is conveniently bent and is designed for the width of one finger. The overall dimensions of the tool are smaller than those of analogs, so it is convenient for them to reach hard-to-reach places (in the corner of the roof, in the partition).

The length of the nails used varies from 32 to 55 mm. It is suitable for both punching pallets, and for assembling a permanent fence. A pistol weight of 2.88 kg loads the arm, and interruptions are required.But the capacity of the store reaches 400 pieces, which eliminates the frequent recharge and inconvenience when working at height. The outlet is suitable for nails with a diameter of 2.1 to 2.5 mm. To fully work, you need a compressor pressure of 4 to 7 bar.

Advantages:

• big store;
• compact size of the structure;
• low working pressure;
• wide range of lengths of used nails;
• rubber grip;
• scale with centimeters and inches;
• fast refueling in the drum;
• a strong beat.

Disadvantages:

• heavy;
• expensive.

Makita AF505 - to work all day

The Japanese air pistol is very light weight compared to other models, which is convenient for working throughout the day and performing operations at height. The weight of the tool is only 1.45 kg. The design has a straight handle, ending with a mouthpiece for connecting the compressor hoses. The store is made in a rectangular shape and is designed for a nail length of 15 to 50 mm. But its capacity is not too large and is 100 pcs. The device is able to function with studs.

For normal operation requires a pressure of 4 bar. The design of the case is characterized by proper balancing and is not outweighed forward. The protective mechanism provides for the triggering of a nail shot only if there is an end stop. This prevents the blow from accidentally pressing the trigger. On the model, you can adjust the depth of nailing. Waste air flow through the channels is diverted to the side, not in the user's face.

Advantages:

• light;
• good balancing;
• able to work with small nails;
• protective mechanism of operation in the presence of emphasis;
• affordable cost;
• There are no misfires.

Disadvantages:

• small shop;
• does not work on low-power compressors.

Matrix 20-50 57410 - for home and part-time work

This German construction tool is distinguished by its simplicity and compactness. The model has a minimum set of necessary mechanisms and devices, as well as an ergonomic design. The store is designed for 100 pcs of studs or nails with a cap. The trigger is quite wide and convenient for frequent descent. The clip is additionally fixed to the bottom edge of the handle. The section in the outlet allows the use of consumables with a diameter of 1-1.25 mm.

The name immediately indicates the length of the nails from 20 to 50 mm. The body is made entirely of metal plates, so it is reliable in harsh construction conditions. But the developers were able to keep a small tool weight within 1.2 kg. The maximum pressure must not exceed 8 bar. The gun is convenient for fixing slate sheets, covering wooden structures with rolled materials and repairing furniture.

Advantages:

• affordable cost;
• very light;
• robust case;
• high speed;
• quiet;
• compact

Disadvantages:

• small shop;
• It works only with high-quality consumables (cheap nails bend).

The best air guns for purging

In finishing work, it is necessary to carefully remove dust and debris before applying the next layer of putty or paint.

It is especially important to use it in filling up slots or creating texture elements. It uses pistols and compressors that blow out all the excess from surfaces over a large area, allowing you to continue finishing. Here are the best of these models for reviews.

Forte AG-16 - simplicity and availability

This construction pistol will quickly blow away debris and small particles of materials from walls, projections, cornices or floors. After it is easier to accurately try on a plinth or continue finishing. The model is characterized by simplicity of design, has a straight handle and a trigger with a length of two fingers. From above the loop for fixing of the tool on a wall is provided. The cone-shaped nozzle increases the air velocity at the outlet and correctly directs the flow.

The tool operates from a compressor pressure of 1-8 bar, which is regulated by a valve and a pressure gauge. The total weight of the pneumogun is only 0.7 kg. The housing and channels are sealed and there is no etching during operation.The design of the tool is reliable and it is not afraid of falling. The button and spout can be detached by twisting off the thread for cleaning.

Advantages:

• cheap;
• light;
• lasting;
• does not pass air on connections;
• compatibility with compressors of other firms;
• supports high pressure operation.

Disadvantages:

• simple design;
• short nose;
• the loop for hanging is rather flimsy.

Fubag DGL 170/4 - for semi-professional use

Such a tool immediately stands out build quality. The body is molded from aluminum, which makes it both light and durable. The weight of the structure is only 200 g. To reduce the weight, the developers created a void in the handle, which turned out to be voluminous, but not heavy.

Pneumatic pistol is distinguished by an elongated spout in the form of a narrow tube, which allows to blow garbage not only from flat surfaces, but also to reach hard-to-reach places.

The handle is placed at 45 degrees relative to the trunk, which facilitates the position of the wrist when working in a horizontal direction. In one minute, the device is able to let 170 liters of air flow through itself, which makes it a professional tool designed for large areas.

For it to work fully enough 4 bar pressure. You can detach the long nose, the start button and the mouthpiece for the hoses from the body. This allows you to clear the internal passages.

Advantages:

• aluminium case;
• long narrow spout;
• large bandwidth;
• simple maintenance;
• long work;
• very light;
• convenient and volume handle.

Disadvantages:

• no mounting loop;
• trigger away from the handle.

Metabo BP 200 - for true professionals

This model is positioned as a real professional tool. The price of the device confirms this. The design of the gun has an original design with a straight handle and a stop at the end. The trigger is made to the full length of the handle and it can be pressed with all four fingers. A loop for hanging the tool is provided on top. In a minute the instrument is able to let through up to 350 liters of air.

Above the trigger there is a hook for fastening the pistol to the protruding side of the surface. Spout turned curved shape. In relation to the handle, it is rotated 120 degrees, and it is very convenient for working at shoulder level, since it does not overload the arms. The tip of the nose is equipped with a removable rubber nozzle that prevents the metal edge from scratching the treated surfaces. But if you remove the tip, you get a narrow tube for blowing gaps.

Advantages:

• many items for hanging;
• ergonomic design;
• skips 350 liters;
• weight 140 g;
• work from 3 bar;
• rubber edge spout;
• curved body shape.

Disadvantages:

• much more expensive than analogues;
• if the trigger is not pressed with all fingers, the rest will be pinched.

The best air guns for sandblasting

To clean the surface not only from debris, but also from rust or old paint, not enough air flow. In such cases, solid granules are added to it. This may be sand or a special mixture. It rubs the surface at high speed, making it clean and shiny. Here are the best air guns according to user feedback for this type of activity.

Intertool PT-0705 - for infrequent use

For short work, an inexpensive model of a pistol with a reservoir on the front part under the body is suitable. Tank capacity is 1 liter. The container material under the sand is steel. The body of the gun itself is made of composite. Spout has a threaded connection with the barrel. On the handle there is a convenient cut-out under the crushed trigger and an expanding part for gripping. From above, on a trunk, the hook for suspension of the tool is provided.

The device works with quartz sand, pre-washed, or with the store abrasive mixture. To start the jet requires a pressure of 8 bar. Air consumption is 400 l / min. To ensure the transfer of the required air volume, you need a hose with a diameter of 10 mm. The nozzle maintains the permeability of granules up to 6 mm in diameter.

Advantages:

• good price;
• river sand can be used;
• metal tank for pellets.

Disadvantages:

• short nose;
• slowly cleans rust;
• tank prevents the manipulation of the gun;
• only works with high pressure;
• you need to carefully sift and dry the sand.

Forte SBG-586P - good for frequent repairs

This pneumogun body is designed for long-term work on cleaning surfaces. The flow of sand is carried out in the front of the barrel through a separate hose, which is immersed in a bag or a bucket with granules using an additional nozzle with a handle. In order to better clean the surface, another nozzle with a smaller diameter is provided.

The device only works from 8 bar pressure. The total mass of the gun is 800 g. The diameter of the main nozzle is 6 mm. The air supply is supplied through the nozzle закреп fixed in the handle. At the junction of the barrel and handle there is a large diameter loop for hanging the tool. In the new model there is a lot of oil for transportation, which should be removed before use. The model consumes sand in the calculation of a bucket for 10 minutes.

Advantages:

• additional nozzle included;
• light;
• quickly cleans rust;
• two nozzles are enough for processing more than 20 small parts;
• just sift the sand through a sieve;
• can work on soda.

Disadvantages:

• short hose;
• the nozzle is quickly exhausted;
• need a powerful compressor;
• no hose clamp for nozzles for sand intake.

Intertool PT-0706 - for all surfaces

The tool is suitable for removing the old layer of paint from wood, metal, concrete. There is enough pressure to clear the surface of plaster and dried dirt. Corrosion from metal structures removes to shine, leaving a condition that is suitable immediately for painting. In one minute the device is capable of letting through 420 liters of air pulling sand along.

The gun is unpretentious to the mixture, and can work with soda, dried sand, and even slightly wet. But an integral requirement for this is a compressor designed to deliver up to 600 l / min of air.

The kit includes two nozzles, metal and ceramic. Bulk material is supplied through a meter hose from a bucket. It is convenient for them to clean hard-to-reach places where the grinder cannot reach.

Advantages:

• powerful;
• convenient case;
• two nozzles included;
• unassuming to loose mix;
• quickly cleans the surface.

Disadvantages:

• short hose;
• the nozzle is quickly erased;
• the air supply valve may stop responding;
• the hose is very rough and bends poorly.

The best air guns for liquid substances

During repair work, it may be necessary to apply the cleaning solution to a large area of ​​the floor, windows or painted walls.

It is also necessary to treat metal structures with anti-corrosion coating. Here pneumoguns are used with additional tanks, which are filled with the desired composition. Here are the best types of such tools.

Miol 81-570 - for quick and easy processing

This construction equipment is distinguished by its unpretentiousness and simple operation. They can easily spray detergent or apply Gravitex on metal fire escapes or roof rails. The body has a classic pistol shape, with a smooth barrel and a bronze spray nozzle. This nozzle twists and allows you to clean the internal channel. The handle is volumetric and has notches against sliding.

The trigger is designed for all fingers and is suitable for long holding in the pressed position. A tube and a threaded fastener for a tank with liquid is placed under the barrel. Its capacity is 0.5 liters. Included is a small hose from the gun to the compressor. The device operates at a pressure of 6-8 bar. In a minute he is able to miss up to 250 liters of air.

Advantages:

• cheap;
• simple maintenance;
• "Ear" for suspension;
• light.

Disadvantages:

• small tank;
• short hose for the compressor;
• there is no air regulator;
• trigger can pinch your finger.

Intertool PT-0704 - for large volumes

This gun is suitable for more professional use where you need to cover large volumes. They can spray a liquid primer up to 7000 square meters. meters in six hours. The unit cylinder is designed for 0.7 liters.

Need to work at a pressure of 10 atmospheres. But the gun copes with smaller values. Long trunk allows you to get to the corners and to high points. The hook at the top allows you to quickly hang the tool to free your hands.

The hose from the compressor to the gun is required from 6 to 8 mm in diameter. Fluid volume adjustment is provided through a brass tip with notches for rotation. Even lime can be sprayed, but requires thorough rinsing after that.

Advantages:

• suitable for white spirit and other washing liquids;
• works with a different pressure;
• spray control in the tip;
• can work with a liquid primer;
• long trunk;
• durable case;
• large coverage area in a short time;
• inexpensive.

Disadvantages:

• feeds binders in portions;
• It is inconvenient to have a finger between the trigger and the balloon.

Werk AUG-14 - affordable and functional

The construction air gun from the Chinese manufacturer is very similar to the models of other firms, but has lower cost and greater functionality. This tool contains a convenient regulator of the supplied air flow, which is located on the left side of the housing in the form of a wheel. This allows you to set up directly in front of the treated surface, and not near the compressor. The volume of fluid is traditionally adjusted by turning the nozzle.

The maximum pressure for normal operation should be 5.92 atm. The package is supplemented with a nylon hose and a 0.45 cm nozzle. The main nozzle is 5 mm in diameter.

Advantages:

• air regulation;
• fluid adjustment;
• nozzle included;
• works with viscous compounds.

Disadvantages:

• the trigger catches the other fingers;
• no tank included.

What construction pneumogun buy

For quick repair, several pistols that are alternately connected to one compressor will be useful at once. They are needed both in the initial stages of work and in the final stages.

The decision to purchase a particular type of gun depends on the type of future activities:

1. To quickly attach parquet or hang a fence on the ceiling, install a wooden fence or nail the rolled material, you will need the 4PRO CN55 or Makita AF505 tool. The first model is needed by professionals, and the second will fit for self-repair.

2. To blow garbage at the place of installation of parquet, future painting or gluing, use pistols with cleaning purpose. For personal use, you can buy Forte AG-16, and for working with large volumes, Metabo BP 200 is useful.

3. It is convenient to sandblast the Intertool PT-0705 or Forte SBG-586P pistol model to remove old paint from wood or iron stairs. They will cope with plaster and dried clay.

4. Quickly prime the surface or coat metal structures with an anti-corrosion mixture using Intertool PT-0704 or Werk AUG-14.