When you want to paint a large area with a minimum paint consumption and without numerous stains, then use spray guns. They provide a tank of paint and a system of supplying it to the outside, where electromagnetic oscillation and pressure on the piston or compressed air supplied from the inflated manual pump or compressor are applied. Find out from the ranking of the best spray guns popular models for spraying primer, antiseptics, enamels, varnishes and paints, which is based on the characteristics of the models and reviews of their owners.
Content:
The best hand spray guns
Such equipment is driven by pumping air pressure through the hands of the operator. The air supply remains in the cylinder and requires periodic replenishment, for which it is necessary to stop the painting process.
Manual spray guns are suitable for applying liquid formulations with a density of up to 1300 g / m3, which corresponds to lime, aqueous chalk solution, emulsions and antiseptics.
KSOM KRDP-4 018-1031 - for home repair
This hand spray gun is the best for whitewashing the facade or high ceilings of the house due to the presence of a long fishing rod 150 cm and tank capacity of 2 liters, which will allow you to work for a long time without refueling and easily reach the very top without installing extras.
At the end of the fishing rod on the operator’s side, a rubber handle is provided to hold the device firmly. Feed adjustment is carried out by a ball valve at the entrance to the extension.
Pros:
- simple assembly of the device with metal clamps;
- comfortable grip for pumping with both hands at the same time;
- collapsible fishing pole, which is easy to transport and set the length depending on the height of the painted object;
- durable metal base, not damaging the body from putting on asphalt;
- bracket for hanging the device on the shoulder;
- a support for the foot so that the body does not jump up during the inflation of pressure;
- a drain valve to release excess air after work and produce easy opening of the lid;
- accumulates pressure up to 5 atm;
- copes well with the primer;
- metal fishing rod;
- You can work with liquids viscosity up to 20 din.
Minuses:
- opaque body, so you need to focus on the remaining paint by weight;
- weight 5.3 kg is heavy for long wearing;
- the price is 5000 rubles;
- poorly fitted rubber seal;
- poor performance.
ULIG 050-00 018-1045 - with the strong case
This domestic hand spray gun will be the best for institutions involved in spraying trees and treating trunks, because its body is made entirely of metal, which increases working life when used by different operators.
A thin steel fishing rod is easy to manipulate to evenly and quickly apply the substance. The rubber grip will not let the tool slip out even in hot weather. The kit includes all hoses for starting the unit.
Pros:
- loop for connecting knapsack fastening;
- folding bracket for leg support;
- collapsible fishing rod, which is convenient to carry in the trunk;
- adjustment of pressure supply and spraying speed by a ball valve;
- high performance of 250 m2 for 1 hour of work;
- pressure retention up to 5 atm;
- two hoses included (1.5 m for suction and 5 m of pressure hose).
Minuses:
- it is required to transfer not only the spray gun, but also the tank to which the suction hose is connected;
- no belts included for belt hanging;
- cost of 5,000 rubles;
- All-metal body has a weight of 6.5 kg.
Top electric spray guns
Such equipment is used for work inside and outside the premises, and is limited by the length of the wire from the outlet.
The tool produces paint due to the action of the collector electric motor, transmitting torque to the piston and the fan. This does not require significant effort from the operator and it is enough to fill the tank with paint and evenly drive against the surface.
Caliber MASTER EKRP-350 / 2,6M - for aqueous emulsion ink
This is the best electric spray gun for painting large surfaces with various paints, because its throughput can interact with a substance density of up to 40 din.
The model has a long handle, convenient for grip, with a limiter on the end, so that the device does not fall out of hand.
The hook on the top allows you to quickly hang the tool by the cable or the edge of the table with a side. The container with paint is located below and does not block the view.
Pros:
- adjustment of the output diameter by rotating the spray head;
- robust housing with jumpers between the handle and the barrel;
- reasonable price of 1800 rubles;
- limiter at the top and bottom of the handle;
- changing the amount of exhaust air by twisting the wheels under the trigger;
- funnel included for accurate paint pouring;
- weight of only 1.8 kg is convenient for long-term work;
- nozzle diameter of 2.6 mm allows the use of thick solutions or apply a thick layer in one pass;
- power is 350 W;
- sold with tank;
- convenient start key;
- can work with viscosity up to 40 din.
Minuses:
- tank capacity 0.8 l;
- you can work only in a vertical position, otherwise the paint flows inside through the channels;
- productivity is 0,28 l / min.
Elitech KE 650P - large volume with low pressure
This is a new development of a leading power tool company, where the device works quietly, producing a slight pressure, but this is enough to supply a large amount of paint. The productivity of the device is 0.8 l / min, which has few analogues in this category of equipment.
The device is divided into two blocks: a handle with a container and a engine compartment, which is connected to the spray gun with a hose. This eases the load on the operator’s hand and allowed us to mark out a powerful 650 W engine.
Pros:
- convenient form of setting the spray gun to the base with a special nest;
- rubberized grip operator;
- the volume of spraying is regulated by turning the nozzle, where it is possible to set a throughput value from 1.6 to 2.6 mm;
- tank bottom does not block the work area;
- light weight of the gun itself, due to the location of the motor separately;
- air flow control due to the torsion of the support wheel under the trigger;
- interaction with substances viscosity up to 60 din;
- two nozzles included;
- sold with shoulder strap;
- torch geometry is adjustable;
- fine dispersion.
Minuses:
- no limiter on the bottom of the handle;
- cost 4000 rubles;
- a small hose from the base requires moving the entire unit when painting a long section;
- hose can jump off;
- tank capacity 0.8 l.
The best pneumatic spray guns
Paint spray guns from a running compressor are distinguished by their high performance, the ability to adjust the spray layer from thin to dense, and maneuverability.
The flexible hose allows to mix freely and does not demand shift of the compressor. It is actively used by professional repairmen.
HUBERTH R500 - with soft impact and wide grip area
This is the best pneumatic spray gun, because it does not create a large cloud of coloring matter, but purposefully distributes the flow to the surface, gently applying the composition.
The spraying width varies from 180 to 280 mm, which is convenient for the passage of narrow sections (pillars, fence boards) and wide areas (walls, solid fence, gate). The tool body is fully metal, which contributes to long-term operation.
Pros:
- a lot of adjustments on the body allow you to customize the geometry of the torch, the thickness of the layer and the spray rate;
- hook for hanging on the cable;
- minimum spray paint;
- works from pressure of 2-5 atm;
- air flow 110 l / min;
- soft stroke trigger due to low resistance;
- work on LVLP technology;
- high strength nozzles and needles.
Minuses:
- short grip will be too small for a person with large hands;
- cost 3,000 rubles;
- a small capacity of 0.6 l will require frequent refueling with bulk objects staining;
- the top location of the tank can close the view to the operator;
- nozzle diameter of 1.4 mm allows you to use only flowable compounds and apply them in a thin layer.
FUBAG 110103 - one of the easiest and most affordable.
This is the best pneumatic spray gun due to its light body, which will not tire the operator’s hand throughout the day. The mass of the device is 500 grams, and the cost is 679 rubles, which makes it available for any work.
The gun has a comfortable grip with the delimitation of the trigger area, so as not to pinch the rest of their fingers while pressing. A loop is provided for hanging from above. Pressure adjustment is carried out behind the metal wheel.
Pros:
- the possibility of giving the torch a round or flat shape by turning the head;
- wide trigger for two fingers;
- the demarcator in the middle of the handle protects from pinching and sliding;
- cost 679 rubles;
- low air flow 141 l / min does not need a powerful compressor;
- works from pressure in 3,5 atm;
- plastic case provides light weight;
- Connection Rapid helps to connect to the compressor in one touch.
Minuses:
- tank top can interfere with the ceiling work;
- paint tank scrolls;
- nozzle diameter only 1.5 mm;
- may occur drips from under the tank.
The best battery spray guns
Battery models give a certain amount of freedom to move, because the operator does not pull a wire or hose, but the running time is limited by the battery capacity, so they are suitable for small volumes in places where electrical connection is difficult.
Ryobi ONE + P620 - to work in all spatial positions
This is the best battery spray gun, which received a large number of positive reviews, because it allows you to work on horizontal, vertical and ceiling surfaces.
The handle is completely rubberized and has a D-shaped, which eliminates loss. The tank under the gun is a little translucent, which makes it easier to control the level of paint. The start button also has a rubber pad and a minimum vibration from the motor.
Pros:
- power is 200 W;
- productivity is 0,34 l / min;
- the tank with a capacity of 1 liter ensures a long process without refueling;
- complete tips for vertical and circular spraying;
- set with cleaning supplies;
- hook for hanging;
- air cooling protects the motor from overheating;
- flexible intake tube to deliver fluid when the instrument is tilted;
- tank leakage protection;
- can work from batteries of different types.
Minuses:
- weight with a battery of 1.93 kg, which can cause rapid hand fatigue;
- the cost of 5800 rubles;
- sold without battery and charging.
BORT BFP-18 A - with a complete set for work
This spray gun comes immediately with a battery and a charger, which allows you to start using it after unpacking.
The model has a U-shaped design with a rubberized handle and a battery on one side, and a second handle, tank and nozzle on the other side. At the end of the wheel displayed to adjust the flow of paint.
Pros:
- additional handle to reduce the load on the hand;
- battery capacity of 1.2 A / h allows you to work for about 3-5 hours;
- high performance for the battery tool 0.3 l / min;
- complete charger, bowl-viscometer and valve;
- comes with a carrying case, which is convenient for transportation;
- the optimal price is 3000 rubles;
- The lower position of the tank does not close the view.
Minuses:
- weight 2.4 kg;
- 0.5 liter tank
It will be interesting to friends too
