To make a beautiful ceiling during the repair and save a little money and time, use special paints. Unlike foam plates and plastic panels, or Armstrong in general, painting is performed in 1-2 hours depending on the area and method of application. It is possible to take care of the coating by doing wet cleaning, and after a couple of years the color of the ceiling can be easily changed to a new one, which is more difficult in the case of a tension or adhesive material. An important role in the choice of paint is played by its basis and expense, and the reputation of the manufacturer only helps to decide on the choice rather.
Content:
Top European Ceiling Paint Manufacturers
In the building stores presented a lot of goods produced by foreign companies. They are distinguished by high quality compositions, resistance to abrasion and a variety of types and colors. Here are the most popular manufacturers for user feedback.
Henkel - products are expensive but quality
The German company is known since 1876, has a headquarters in Düsseldorf and produces paints called Ceresit. Although the firm specializes in detergents, cosmetics and glue, building mixtures and paints it has excellent quality.
Ceiling paints are available in silicate and acrylic base, which is well resistant to moisture and other negative factors. This proven suspension requires preliminary surface preparation in the form of mineral plaster.
The finished result is notable for simple maintenance, high resistance to fungus and environmental friendliness. The products are made on modern equipment using German technology, even if the plants themselves are located in other countries.
Pros:
- the thought-over composition of paints;
- high environmental friendliness;
- good coverability;
- products are moisture resistant;
- does not allow the fungus to develop on the ceiling;
- high adhesion with other materials.
Minuses:
- not cheap;
- containers of 15 liters only;
- not the largest range of paints for the ceiling.
Dulux - the world leader in paint sales
This is a well-known company that is part of Akzo Nobel. Headquarters located in Amsterdam. Despite the Dutch roots, paint production is carried out in 26 countries of the world, which are located on four continents.
The company's motto: "Helping create beautiful places." The staff employs many professionals developing new formulations of coloring substances and improving existing products. Pigmenting mixtures are characterized by high light absorption, which masks the unevenness of the ceiling.
Pros:
- two layers are enough for the final result;
- small expenditure of funds;
- environmental components;
- wide range of colors;
- simple care for painted surfaces;
- no sharp odor;
- easily adheres to the painted material;
- the possibility of applying to unprepared surfaces;
- quick drying of most types of paint.
Minuses:
- high price;
- products manufactured in factories in Russia are inferior in quality to the same product from another country;
- there is a very thick texture, so you have to dilute, which can create differences in shades.
The best Russian manufacturers of paints for the ceiling
There are many chemical plants in Russia that are able to compete with foreign manufacturers in the production of water-based and other paints for finishing ceiling surfaces. Their cost is more accessible, and the following companies have recommended themselves best.
ABC Farben - a powerful domestic manufacturer
Since 1995, the plant operates in the Voronezh region, which was rebuilt and expanded several times. It all started with oil paint PF-115. Now the company produces a wide range of enamels, varnish, varnishes and coloring mixtures for all types of coatings.
Employees regularly take advanced training courses in Germany and Finland. Each workshop has its own laboratory for tracking the quality of raw materials and finished products. The crisis in 2009 prompted the company's management to focus on economical products and expand the range of colors from the low-cost segment.
Pros:
- a wide range of oil paints for the ceiling;
- strict quality control of products;
- very reasonable prices in comparison with import analogs;
- the largest Russian manufacturer;
- good covering power;
- acrylic species are able to paint over the site in one pass;
- variety of colors.
Minuses:
- very thick;
- oil types are tightly applied;
- when breeding lumps are formed.
VGT - modern production in the center of Russia
This domestic concern has two plants: in the Moscow region and in Yaroslavl. Modern platforms are equipped according to European standards. The company specializes in the production of varnishes, paints, enamelling compositions and putty.
The range includes more than 200 items of goods. All products are accompanied by expert opinions from the fire and sanitary-epidemiological services. Certificates of conformity are open to all on the official website. Products are sold in 73 regions of the country and imported to 6 foreign countries.
Pros:
- good assortment;
- availability of all certificates of quality and safety;
- developed dealer network;
- the possibility of bulk purchases for contractors;
- various packaging;
- modern equipment;
- affordable price;
- dilution of the mixture with water;
- good surface closure the first time.
Minuses:
- white acrylic types poorly cover dark spots;
- Strong smell;
- dries long and can drip from above.
Teks - the leader in the availability of certificates
Another Russian company is successfully moving in the domestic market. The manufacturer specializes in enamel, universal paints, antiseptic impregnation and primers.
The company has published on its website more than 80 certificates and declarations of conformity for all its products, indicating the safety and approval of regulatory authorities.
Many examinations were ordered voluntarily to increase the trust of the end user. Production differs in durability and a big variety. The issue is overseen by the main concern "Tikkurila", which owns this Russian production.
Pros:
- easy to work with most types of paints due to easy application;
- there are interesting positions with a matte color;
- even layer;
- products are applicable to various surfaces;
- no stains;
- stirred to a smooth consistency;
- variety in price categories.
Minuses:
- sharp smell, so it is best to paint in a respirator;
- several layers are required.
It will be interesting to friends too