mylogo

One of the most effective ways to paint a large surface is a pneumatic spray gun that connects to a compressor or a compressed air cylinder and applies a substance with a fine dispersion and high performance. But this tool is divided into several categories according to the combination of internal pressure and the supplied air volume, which is important to consider when choosing for different tasks. This will help our ranking of the best pneumatic spray guns, which will show the most suitable models for painting gates, doors, fences, containers, walls and metal structures.

 

 

Pneumatic spray gun

HP's best pneumatic spray guns

Such equipment is used for home painting in the garage or repair in your own home.

Models function with high pressure, which allows you to quickly paint the surface and apply varnish and paint on the walls and metal, but requires a powerful compressor. During operation, there is a strong return of flow from the wall and a saturated gas cloud.

FUBAG BASIC S750 / 1.5 HP - for painting in all spatial positions

FUBAG BASIC S750 / 1.5 HP - for painting in all spatial positions

This is the best pneumatic spray gun for painting walls, ceiling or floor due to the hermetic tank with the lower fastening to the gun, so that the tool can be rotated and tilted without the risk of paint leakage.

The container is completely metal and made of stainless steel, which makes it easier to wash off after the work is done. Needle and pistol head, also made of stainless steel. On the body there are two regulators for the pressure and the amount of material supplied.

Pros:

  • ring for quick hanging tool;
  • two limiters on the handle that prevent slipping during operation;
  • wide trigger on two fingers;
  • adjustable pressure and paint supply level;
  • key elements of stainless steel;
  • the optimal price for a home spray gun 1290 rubles;
  • outlet diameter 1.5 mm for fast passage of a wide surface;
  • Rapid connector allows you to easily connect to the compressor hose and start working;
  • weight of 700 grams does not overwork the hand when working during the day;
  • a short length of 176 mm is convenient with limited space;
  • the strong case provides long operation;
  • controlled torch shape.

Minuses:

  • through the metal tank can not see the residue on the paint;
  • 0.6 liter tank will be quickly consumed due to high pressure and wide nozzle;
  • high air consumption of more than 250 liters per minute;
  • There are no original nozzles for sale, so you have to pick up analogues.

Kraton HP-01G - for fence, walls and gates

Kraton HP-01G - for fence, walls and gates

This is the most suitable pneumatic spray for home repairs due to the affordable price of 1,160 rubles and a durable housing made of aluminum alloy. Lateral connection of the paint tank will not block the view and is optimal even for beginners in this business.

Nozzle with a needle is poured out of stainless steel, which makes it easy to clean and use them for a long time. If the hand is tired, the equipment can be hung up for a break in work by the top hook.

Pros:

  • the shape of the torch is easy to adjust by turning the horns of the nozzle;
  • a knob with knurled wheel on the back of the case allows control of pressure;
  • tucked pistol will not fall into the hand due to the curved part and the emphasis on the handle;
  • wide trigger is convenient for pressing with two fingers;
  • the tank is shifted to the side and connected to the side, which is better for viewing the working area;
  • the trigger does not pinch other fingers when pressed, because they are separated by a partition on the handle;
  • spray width is set from 180 to 250 mm;
  • high throughput due to nozzle 1.5 mm;
  • Aluminum housing resistant to drops and bumps;
  • the head and the needle are not subject to corrosion;
  • paint tank can be adjusted to the angle of inclination depending on the work in a certain spatial position.

Minuses:

  • it will take time to connect to the hose due to the threaded connection;
  • need a powerful compressor with a pressure of 3-4 atm;
  • high air mass flow 200 l / min;
  • the device is very heavy 1 kg, which will quickly get tired arm;
  • paint container is small 0.4 l.

The best pneumatic spray guns HVLP

This is a more advanced spray gun system, where a large volume of air is supplied at a low pressure of 0.7 bar, which gives a thick layer on the surface in one pass and a minimum of paint residue in the form of a cloud. Economical paint consumption requires a strong compressor to provide pressure.

STELS AG 810 HVLP 57361 - for finishing works

STELS AG 810 HVLP 57361 - for finishing works

Such a pneumatic spray gun is the best for applying a thick layer of paint when finishing, which will evenly distribute the material and does not require a powerful compressor.

The compact unit has a length of 100 mm, so it is convenient to wield it, even in the hallway or a small pantry. The kit comes with two sets of nozzles for 1.0 and 0.8 mm for different density of painting.

Pros:

  • cost of 1000 rubles;
  • convenient weight for long work of 450 grams;
  • all key elements (needles, nozzle, trigger and adapter into the container) are made of stainless steel;
  • strong aluminum case;
  • comfortable large knurled regulators;
  • compound rapid;
  • air mass flow 113 l / min;
  • a working pressure of only 2 atm is required;
  • complete brush for cleaning.

Minuses:

  • too small capacity for paint in 0.1 l;
  • two needles have a diameter of 0.7 mm, although the nozzle is 1.0 and 0.8 mm.

Jonnesway JA-6111 - for extensive painting work

Jonnesway JA-6111 - for extensive painting work

Such a pneumatic spray gun will be the best for professional work, where it is necessary to paint large areas with high quality results. The device has for this a convenient nozzle shape with a wide ribbed strip for a quick change of the nozzle depending on the type of surface.

The shape of the torch is easy to adjust with the help of the side adjuster, which can be done with one hand. The wheel at the end controls the amount of paint supplied, and the screw in the handle regulates the air pressure.

Pros:

  • outlet diameter of 1.4 mm;
  • weight 700 grams;
  • suitable for all types of paints and varnishes;
  • ribbed handle with two long stops;
  • a curved trigger against slipping of a finger;
  • hook for catching and storing;
  • good spraying with minimal cloud, where most of the material settles on the surface;
  • high-quality components and long service life.

Minuses:

  • high air mass flow rate of 400 l / min;
  • high cost 6000 rubles;
  • the threaded connection is longer;
  • a capacity of 0.6 ml will require frequent refueling;
  • requires a pressure of 3.5 to 5 atm.

The best pneumatic spray guns LVLP

Equipment with this principle of operation is characterized by a low air supply in combination with a low pressure, which leads to the creation of a torch 50–100 mm longer than other types and a low gas consumption.

This technology is practical when painting inaccessible places on cars and other structures.

HUBERTH R500 RP20500-14 - for painting auto parts

HUBERTH R500 RP20500-14 - for painting auto parts

This is the best pneumatic spray gun for working with structures of complex shape, including car doors, hood, trunk and other curved parts.

A nozzle with a diameter of 1.4 mm provides optimal throughput, while a low volume of air and pressure allows it to reach remote and narrow spaces. At the same time, the spraying width is adjustable from 180 to 280 mm, which is suitable for thin parts and solid surfaces.

Pros:

  • metal durable case;
  • convenient hook that allows you to easily pick up the tool and store it on a rope or rope;
  • wide trigger stainless steel;
  • two stops against slipping or failing a gun;
  • knurled handle provides strong hold;
  • the shape of the torch is adjusted by turning the nozzle, and the pressure is set by the valve at the back;
  • through the plastic tank it is easier to control the level of paint;
  • soft trigger work;
  • small air flow 110 l / min;
  • nozzle diameter 1.4 mm.

Minuses:

  • the cost of 3090 rubles;
  • the top location of the tank may block the view;
  • threaded fastener;
  • capacity 0.6 l;
  • weight is 850 grams.

It will be interesting to friends too

 

 

 


mylogo

Selection

Ratings