Enamels are used for decoration of premises and exterior surfaces, car bodies, boats, door frames and gates. They differ in binder, affecting the degree of interaction with the surface and the stability of the layer during operation. Enamel is applied with a brush, roller or spray by spraying, as well as from a can. We have prepared a rating of the best enamels for concrete, metal, brick, boards, drywall, stone, plastic, glass and fiberboard, which will help you choose a product with good characteristics for durability and insulating properties, as well as decor.
Content:
Best Acrylic Enamels
Such substances fall well on the surface and are not afraid of moisture. They are used most often on metal to protect it from corrosion, but there are also building mixtures for stone and wood.
Can be supplied in spray cans or cans. Suitable for car bodies and metal products (doors, gates, forged fences).
Kudo KU-5001 silver - for elements with high temperature
This is the best acrylic enamel for metal parts that are subject to intense heat, be it an exhaust pipe, a heat-conducting route, or a gate that faces the sunny side and is overheated by the summer sun.
The substance is designed to withstand temperatures up to 650 degrees, and retains its insulating and decorative properties. Available in a can with a lid that reflects the color of the contents. The aerosol is convenient for quick spraying on a surface with different relief.
Pros:
- attractive price from 160 rubles;
- nice gray color, which is not very easily soiled;
- can be used for both outdoor and indoor applications;
- drying time is 10 minutes, after which the next layer can be applied immediately;
- can be stored in the cartridge up to 5 years;
- easily covers difficult sites with ledges and hollows thanks to aerosol type of drawing;
- does not require additional equipment and tools;
- good covering ability without gaps;
- silicone base;
- does not need dilution.
Minuses:
- the volume of only 520 ml is small for a large area, which will require several cans;
- for a good result you need at least 3 layers;
- only suitable for metal.
Colorist PF-115 20 kg matte white - for office walls
This is the best acrylic enamel for large-scale repair in the office and painting the walls in snow-white color due to the implementation immediately in the bank weighing 20 kg, which is enough for a vast area. In addition to walls, enamel is suitable for chipboard, brick and drywall.
The substance is allowed to be tinted to obtain the desired shade. It can be applied with a roller, brush or spray.
Pros:
- a dry residue of 60% gives a dense paint structure;
- for optimal results, one layer is enough;
- wide scope;
- density of 1.5 kg / l;
- attractive matte color;
- can be stored at temperatures from -30 to +30 degrees;
- Large volume in the bank is convenient for one-time purchase and transportation, as well as storage capacity.
Minuses:
- cost from 1800 per bank;
- thinner Toluene or Turpentine is required;
- after work, the tools must be thoroughly cleaned;
- You can work only in well ventilated areas;
- full drying 24 hours;
- shelf life of only 12 months.
Best alkyd enamel
These coatings are highly resistant to abrasion and retain a rich color despite the sun's rays and aggressive chemicals, due to the presence of alkyd resins and varnishes, which increase the density of the substance after drying. Use them for exterior and interior decoration. Sold goods in banks.
Finncolor Garden 30 9 l - for frequently washable walls
This is the best alkyd enamel for public places where frequent washing of walls is required due to the large number of visitors, because the paint has a high degree of wear resistance and a pleasant semi-matte appearance.
She can paint concrete surfaces, plaster, drywall, chipboard. Well she manifests itself indoors and in outdoor use. Available in small containers of 9 liters each and resistant to atmospheric conditions.
Pros:
- convenient side for easy uncorking of the can;
- economical consumption of enamel 1 liter per 10 m2 with the passage of one layer;
- does not have a strong odor;
- dry residue up to 75% indicates the presence of undissolved minerals and dense structure;
- dries to a state in which dust no longer sticks in 4 hours;
- resistant to mechanical impact on the painted surface due to its elasticity;
- suitable for application with roller, spray and brush;
- not fully flammable, and does not contribute to the emission of smoke when there is an open fire nearby;
- suitable for tinting;
- shelf life of 60 months.
Minuses:
- the cost of production of the Finnish brand from 4800 rubles per bank;
- needs solvent purchase and dilution;
- The next layer is allowed to be applied only after 24 hours.
Tikkurila Miranol A 2.7 L - for boats
It is the best alkyd enamel for painting boats and other surfaces that are often in contact with water, because it contains an alkyd varnish that is resistant to moisture. The product is produced in small containers of 2.7 liters, which is enough for one hull of a large boat.
Pros:
- the substance has a shock resistance that will protect the bottom of the boat from mechanical damage to the paintwork when pulled ashore or while swimming in reeds;
- applied without smudges;
- There are more than 2000 blending options for shades;
- forms an attractive high-gloss surface;
- metal consumption 1 liter per 14 m2;
- suitable for application by spray, roller or brush;
- chemical wash resistance;
- dry residue 50%;
- heat resistance 120 degrees;
- density 0.9-1.1 kg / l;
- can be stored at low temperatures;
- does not burn.
Minuses:
- cost from 2300 rubles;
- needs solvent in an amount of from 10 to 35%, depending on the method of application;
- able to emit smoke when heated by fire.
The best polyurethane enamels
Such substances are composed of various types of polymers, which increases their strength and resistance to moisture. They are used in bathrooms, showers, kitchens or for outdoor painting. Paints for metal, wood and stone are suitable.
Symphony Winner A glossy 9 l - for the bathroom
This is the best polyurethane enamel for painting the bathroom due to the presence in the composition of polymeric binders and special additives that give the surface resistance to chipping, scratching and steam.
Enamel for a long time will protect both wooden and brick walls from fading and the formation of fungus. Means is issued in metal cans, and for especially large objects buckets with a convenient handle are provided.
Pros:
- universal purpose for all kinds of surfaces;
- economical consumption with one layer from 7 to 12 m2 per 1 liter;
- dry residue is 52%;
- can be applied with a roller and brush, and at strong dilution and a spray;
- drying time of the first layer at a temperature of 23 degrees is only 3 hours;
- nice white gloss with the possibility of tinting;
- with continuous static exposure to water for 72 hours, no changes occur;
- after drying, it can withstand solvents and detergents without harm to the surface;
- tolerates the effects of dry heat to 120 degrees.
Minuses:
- cost for 9 liters from 3000 rubles;
- needs dilution by solvent to 20%;
- drawing the next layer is allowed only in a day;
- Can only be used when air humidity is below 80%.
The best nitrocellulose enamel
Such paints have a low cost due to the water base and cellulose binder, which provides adhesion to the applied surface.
They are suitable for metal, wood and concrete, but have a short service life and quickly lose their color brightness. They can be painted only with irresponsible structures with a low degree of mechanical action.
Tex Nitro NTs-132 red - for the fence
This is the best enamel for the fence due to the affordable price from 240 rubles per 1 liter and a wide variety of colors to 10 options. Red is the most popular and well marks the fences around the cottage so that no one enters by car.
The substance has a quick-drying effect and economical consumption. Supplied in metal cans with a tight lid in which the residue can be safely stored for occasional tinting.
Pros:
- price from 240 rubles per liter;
- suitable for indoor and outdoor use;
- consumption of 1 liter per 15 m2 gives a high economy;
- high gloss surface looks much more expensive;
- the drying time of any layer 3 hours allows you to complete the work in one day, without stretching the process;
- Colloxylin in composition promotes good adhesion;
- suitable for use with roller and brush, as well as spray;
- possesses insignificant resistance to chemicals.
Minuses:
- needs solvent;
- metal painting requires pre-priming;
- shelf life of 12 months;
- a dry residue of 18-30% indicates a loose paint structure and slight mechanical damage.
It will be interesting to friends too
