The Japanese manufacturer Hitachi has been operating for more than 100 years, and during this time it has learned how to make high-quality power tools, fully compliant with modern construction tasks and applicable in other service areas. The best Hitachi screwdrivers presented in our rating will be useful when repairing, overlapping the roof, at a service station or for small household work, which depends on their characteristics and will help orient you when buying.
Content:
Hitachi's Best Network Screwdrivers
This is a simple tool with high power, which is suitable for long and active work on installation or disassembly, but is limited by the length of the wire, therefore it is used in stationary places: for repairs in an apartment and house, or in a workshop.
Hitachi W6VA4 - Minimum Required
This is the best Hitachi screwdriver for home or indoor renovation, since the model has everything you need for quality work with any materials in terms of density.
The chuck is equipped with an aluminum twist depth limiter, so the tool will work comfortably even for a beginner without damaging the fragile surface of drywall or wood. The clip in the upper part of the case allows you to quickly free your hands and pick up the device on the belt.
Pros:
- metal gearbox housing;
- rubber inserts on the back of the handle and along the motor block;
- rubber start button;
- the start key lock, so as not to keep it constantly with your finger during a long torsion;
- depth stop;
- ring on the end of the handle for fixing the spare bit;
- motor power 620 W for long screws;
- rotation speed control;
- A mass of 1.4 kg is optimal for different spatial positions;
- magnetic holder included.
Minuses:
- the cost of 5200 rubles;
- no rubber lining in front of the handle;
- 1 speed;
- no backlight;
- ventilation immediately below the gearbox pulls dust inside;
- The small reverse lever is difficult to switch with gloves.
Hitachi's best cordless screwdrivers
This tool is free from wires and allows you to perform work high on the roof, on the street or often change the place of action. When choosing it is important to take into account the parameters of the battery and the twisting force.
Hitachi DS12DVF3 - full light autonomy
Such a Hitachi screwdriver would be best for working on the street or in premises with insufficient visibility. It is equipped with a full flashlight with a battery that does not require pulling the carrying with lighting.
The tool has its own battery at 1.5 A / h, which will allow you to work throughout the day. The T-shape provides the perfect balance and comfortable hold of the screwdriver. Ventilation is placed on the back cover and removes hot air outside.
Pros:
- keyless chuck, in which you can insert bits of different diameters, as well as drills;
- safety strap so as not to drop the tool out of your hands;
- wide rubber pad on the handle;
- protective lock for blocking the release of the battery;
- reverse and gearshift;
- 4 slots for installing spare bits;
- 3 year warranty;
- the twisting force is 26 Nm;
- the ability to create holes in wood with a diameter of 25 mm, and 12 mm in metal;
- motor rotation braking is present when the key is released;
- power button lock;
- overload protection;
- fast battery charging in 60 minutes.
Minuses:
- the price is 5000 rubles for the whole set, including a flashlight and a second battery;
- idling develops 1050 revolutions;
- weight 1.8 kg;
- A NiCd battery can run out if left unattended.
HITACHI DS14DCL-RA - for professionals
Such a screwdriver is the best for professional activity due to the perfect balance of the body, a light weight of 1.4 kg and a twisting force of 31 Nm, which is regulated by the 21 position of the switch coupling.
The reverse will allow disassembling or removing the incorrectly mounted fastener. The model is different from all other Hitachi solid rubber coating of the engine compartment, which will protect the expensive tool in the fall.
Pros:
- durable case in which a lot of space for other items;
- lantern with adjustable angle and stable platform;
- second battery;
- a set of 7 bits for different types of screws;
- 2 adjustable speeds;
- fully rubberized body;
- chuck is bred with one hand and clamps the drill from 1.0 to 13 mm;
- 4 sockets for setting bits, so as not to be distracted while working;
- 22 degrees of tightening force adjustment;
- the ability to drill a hole in a wooden surface with a diameter of 30 mm;
- launch button lock;
- Li-lon battery type has no memory;
- full charge in 60 minutes;
- weight 1.5 kg;
- electronic speed adjustment.
Minuses:
- cost 7,000 rubles;
- 1250 revolutions per minute;
- no blow function.
Hitachi DS18DVF3 - with high power
Such a screwdriver is suitable for long roofing self-tapping screws with a length of 120 mm due to the presence of a 18 V battery, which gives a torque of 45 Nm. So that the tool does not fall out of the hands while on the roof, a safety leash is provided that is worn on the wrist.
Tenacious hold in the hands is provided with a wide rubber grip on the front of the handle. A mass of 2 kg is a good pressure on the screw above, when working in the lower position.
Pros:
- T-shape for better balance;
- separately located buttons of a reverse and start-up exclude spontaneous pressing;
- the chuck is moved by hand without using a key and allows the installation of drills;
- sound ventilation with dust protection;
- speed switch in the upper part of the body with a custom value of each;
- spacious case with a lantern and a second battery;
- a set of bits for instant start after purchase;
- 3 year warranty;
- landing 4 sockets to carry bits not in the pocket;
- 45 Nm force when tightening;
- 22 steps of adjustment;
- the ability to drill wood up to 38 in diameter;
- reverse function for disassembling or removing the drill;
- power from 18 V battery;
- clip for belt hanging.
Minuses:
- cost 8,000 rubles;
- 1200 revolutions are the maximum, which is not enough for drilling less dense materials and will take longer;
- no depth limiter included;
- battery capacity is 1.4 A / h;
- battery type NiCd;
- weight 2 kg is convenient only for work in the lower position.
Hitachi Top Angle Screwdrivers
This is a special type of instrument from the Japanese brand, designed to assemble panels or furniture in hard-to-reach places. Due to the rotation from the body with the motor and the narrow cartridge, it is easy to insert a screwdriver between the wall and furniture or to mount in the corner at the very edge.
Hitachi DN12DY - crawling everywhere
Such a Hitachi screwdriver is the best for hard-to-reach places, not only due to the angular gearbox, but also to the compact dimensions of key assemblies, where the head has a height of 95 mm, and from the tool edge to the center the bits are only 23 mm. This will tighten the fasteners in the corner or in a narrow space.
The cartridge is fast-tightening, so it is convenient to drill with a tool. A 12 V battery has a capacity of 2 A / h and is optimal for long life. The screwdriver is able to operate on a battery with a lower power of 9.6 V, but the number of revolutions will be less.
Pros:
- compact dimensions in height (95 mm) and length (300 mm);
- long battery life;
- strap so as not to drop the tool;
- thought over air cooling system;
- lightweight 1.4 kg;
- plastic case with a set of bits and a second battery;
- a hole with a diameter of 10 mm can be drilled in steel, and 18 mm in a tree;
- keyless chuck;
- electronic adjustment of turns;
- presence of reverse;
- conveniently located start key;
- optimal balancing, taking into account the particular shape of the body.
Minuses:
- no rubber linings;
- cost 13,000 rubles;
- requires to use two hands to fully tighten the fasteners;
- twisting force 9 Nm;
- no backlight;
- missing shock function;
- no clutch switch to set the degree of tightening;
- maximum speed reaches 800 per minute;
- NiCd battery type.
It will be interesting to friends too
