The network tool does not depend on the battery level and allows you to work all day. It is more durable and does not require costs in the process of long-term operation. The best network screwdrivers are divided by power, tightening speed and tightening force, which allows them to be used periodically for minor repairs or constantly during professional activities. From the rating, you can see the important features of both categories of this tool in order to navigate in prices and find the optimal model.
Top Amateur Network Screwdrivers
Cheap screwdrivers will always be useful at home, in the country or in the garage. With their help, it is easier to assemble partitions for home repairs, to disassemble and assemble furniture when moving or to repair equipment. Modest characteristics are offset by an affordable price.
ZUBR ZSSH-300-2 - with good functionality
This is the best network screwdriver from low-cost models, which has good equipment: 2 adjustable speeds, a keyless cartridge with the ability to install drills and torque, whose peak falls on 35 Nm.
Both parts of the handle are rubberized, and the twisting force has 23 steps and a simple switch. Used brushes are easy to replace through side hatches. The speed setting takes place in one touch through the valve in the upper part of the case.
Pros:
- The T-handle optimally distributes the weight on both sides, so the tool is easy to hold with one hand;
- Sophisticated air vents are located along the entire body, which contributes to efficient heat removal;
- change of nozzles or drill is performed without a key;
- the reverse switch is located above the start button and does not touch the hand when girth;
- side button allows you to lock the trigger pressed, removing the effort from the hand;
- the lower ledge on the handle will not allow it to slip out when the palm is sweated;
- the cost of 1700-2200 rubles;
- the screwing force is 35 Nm, which allows the model to be used for tightening thick screws;
- adjustment of each speed for frequently encountered materials in terms of density and thickness;
- the protective coupling prevents flapping of the splines and damage to the surface into which the screw is twisted;
- reverse to change the direction of rotation;
- 5 m long wire to work without carrying.
Minuses:
- 1.6 kg weight is not the easiest for ceiling work;
- the maximum in revolutions reaches 1400 per minute;
- a power of 300 watts will require periodic shutdowns in order not to overheat the motor.
ENKOR DSHE-2 350ER / 10 - with strong wrapping for household class
Such a network screwdriver is characterized by a twisting force, which is regulated by 21 positions, where the maximum is 40 Nm, which will make it possible to tighten the screw with a diameter of 7 mm or to tear through the rusty fasteners. The model has a pistol shape with rubber-coated handles and a comfortable hand press.
The device can not only carry out installation and disassembly, but also drill various materials, because the tool holder is drawn by hand, and the crackers are able to clamp the drill bits. Rotation develops up to 1800 rpm.
Pros:
- buttons for starting, switching the reverse on the gearbox and fixing the start are located close to each other and are easily accessible for pressing with one touch with the right hand;
- on the handle there is a ledge to prevent slipping;
- cost 2000 rubles;
- weight 1.5 kg is the maximum allowable for light household tools;
- a screwdriver will create a hole in a tree with a diameter of 20 mm, and in steel 10 mm;
- torque of 40 Nm is suitable for any kind of fasteners;
- electronic speed control with distribution often used at two speeds;
- 2.5 meter wire;
- Precision coupling with precise setting of the torque force allows you to adjust the degree of twist on the basis of mounting hardware and materials;
- suitable for fixing sheeting to a metal profile with a wall of 2-3 mm;
- The plastic on the case is sturdy and tolerates falling from the table.
Minuses:
- through the wide ventilation holes in the case pulls a lot of dust, especially when working with plasterboard;
- a power of only 350 W is not suitable for long work and the tool will overheat;
- supplied in carton;
- after unpacking, there is a strong smell of plastic;
- there is no braking on the engine;
- there is a slight play of the cartridge.
Top Professional Network Screwdrivers
Such screwdrivers are used in workshops for the manufacture of furniture or for professional repair. Long carrying allows you to move indoors and even work on the roof and not be dependent on battery capacity. The dignity of the models is their functionality and power.
Makita TD0101 - to tear down old hardware or drill a wall
Such a screwdriver, working from the network, will be the best for frequent dismantling works combined with the drilling of walls, because it has a shock function and an indicator of the twisting force of 100 Nm. This will allow you to do with one tool and not carry a percussion drill or perforator with you.
The handle is completely covered with rubber. At the end there is a hole for fixing the spare bit. The start button is also rubberized and made with dust protection.
Pros:
- one of the largest degrees of twisting 100 Nm;
- shock function with performance of 3200 pushes;
- quick replacement of brushes through service hatches;
- 2.5 meter wire;
- Highly located reverse button;
- electronic adjustment of turns;
- weight of 1 kg will not overload the hand;
- metal part of the housing around the gearbox;
- high-impact plastic with high-quality assembly;
- suitable for screws with coarse thread and 90 mm length;
- double insulation of the body in places where current-carrying parts are laid;
- good heat dissipation through aluminum inserts.
Minuses:
- the cost of 5200 rubles;
- only the chuck for fixing the bits is included, so for drilling it will be necessary to re-purchase the fastener;
- 1 speed;
- 230 watts of power will not allow to use the tool all day;
- no adjustment of the depth of screwing;
- no spindle lock.
Hitachi W6VA4 - with depth stop
This is the best model of a network screwdriver for accurate tightening of fasteners, because the design of the cartridge contains an aluminum limiter for the entry of the screw that does not damage the surface. The gearbox is protected by a metal case and dust plug.
The screwdriver is completely rubberized, which helps to hold the tool tightly even in the summer with sweaty palms. To quickly release your hands, a hook is provided at the top for hanging on the belt.
Pros:
- loop for hanging in the workplace or securing the second bit;
- start key lock;
- narrow body without blocking visibility;
- dust protection on the button and gear;
- 1.4 kg weight is optimal for pressure and long work;
- 3000 revolutions per minute;
- high power of 620 W for all-day operation;
- screws with a diameter of 6 mm can be tightened;
- torque reaches 40 Nm;
- as unnecessary depth limiter can be removed;
- Includes magnetic holder and nozzle.
Minuses:
- small reverse switch;
- the price is 5300 rubles;
- no spindle lock;
- 1 speed;
- missing blow function.
Fiolent ShV3-6-REM - a compromise at an affordable price
In order not to overpay for foreign analogues, you can purchase the best low-cost professional model of a network screwdriver, which has a cost of 3000 rubles and has a power of 610 W, a wrapping power of 35 Nm and a weight of only 1.2 kg.
Numerous perforations contribute to the rapid cooling of the tool.The depth limiter will not allow to destroy the drywall surface and additionally holds the screw.
Pros:
- convenient control levers;
- You can set a constant speed by winding the limiter on the start button;
- key lock to remove the load from the finger;
- wrapping limiter;
- power is 610 W;
- 2800 revolutions per minute;
- 35 Nm;
- magnetic screw holder;
- double cable insulation;
- additional sleeve for working with socket wrenches.
Minuses:
- no rubber linings;
- a large number of holes for cooling pulls dust;
- carton packaging;
- 1 speed.
It will be interesting to friends too
