A good screwdriver can last up to 7-10 years and need only periodic lubrication. Japanese brand Makita produces one of the most popular tools that are tested by time and different building conditions. We have prepared the rating of the best Makit screwdrivers for disassembling and assembling furniture, tightening fasteners, installation work, drilling and threading, which is based on user experience and production characteristics of the tool.
Content:
Makit's Best Network Screwdrivers
Many professionals prefer network models, since they are able to work all day without recharging, have high power due to the power supply of 220 V and are equipped with additional functions for a reasonable price. But they can be used only in a confined space with a socket and carry.
Makita TD010F - not afraid of heavy tasks
Such a screwdriver will be suitable for any difficult tasks due to the presence of a blow, which can be used to break long-twisted or rusted screws. The torque at the same time is 100 Nm, which will move the fasteners of large diameter and length in solid material or drive a new one to the very end.
The case is covered with a large number of rubber inserts: on the handle in front and behind, on the end, along the compartment with the motor. When you put the tool on the table, it rests on rubber bumps and does not scratch.
Pros:
- comfortable grip handles with part extending to the bottom;
- numerous ventilation around the entire circumference of the housing for cooling;
- The reverse button is slightly off from the trigger, which eliminates accidental pressing;
- compact body makes it easy to use a screwdriver in narrow, hard-to-reach places;
- cost 4,600 rubles;
- LED lighting does not require additional lighting during short-term operation in low light conditions;
- power is 230 W;
- makes 3200 beats per minute;
- 2.5 meter cable is convenient when working at the table and does not require carrying;
- adjustment of turns;
- weight is 990 grams;
- rotational speed of 3600 rpm;
- torque of 100 Nm.
Minuses:
- 6.35 mm chuck allows only bits to be used, and it is impossible to install a drill;
- no spindle lock;
- only one speed.
Makita FS6300 - for professional fasteners
Such a Makita screwdriver is the best for those who constantly fix sheets of plasterboard or perform other types of interior finishes.
The tool has a convenient attachment for fixing the screw head and the twist depth limiter, which allows you to perform a large amount of work at high speed.
The cartridge is equipped with a wide ribbed area for manual scrolling and dozakrutki in places where there is a fragile surface or an auxiliary force is required.
Pros:
- clip on the case for waist mounting;
- latching the start key to facilitate user pressing;
- light illumination directed to the place of screwing
- metal part of the body with gear;
- rubber back side of the handle and grooved inserts on the sides provide a strong fixation in the hand;
- reverse for unscrewing old screws;
- a cell under the handle for setting the second bit and easy changing during operation;
- additional drawn tip on the side of the manual rotation;
- depth stop and supporting rim;
- power 570 W for high twisting force;
- speed adjustment from 0 to 6000 rpm;
- weight 1.4 kg;
- 4 m cable;
- efficient heat removal from the gearbox due to aluminum;
- double insulation allows operation from plugging into ungrounded sockets.
Minuses:
- the cost of 6800 rubles;
- no case, only cardboard box;
- maximum screw diameter 4 mm;
- no impact function;
- only 1 speed.
The best Makit cordless screwdrivers
Such screwdrivers have lower power ratings than mains, but they can be used at any distance, regardless of the presence of a socket nearby. They are actively used on the ceiling installation, assembly of furniture on the road or inset locks into the gate.
Makita DF030 DWE - one of the most compact assistants
This is Makit's best screwdriver for multitasking use when working away. The tool comes in a plastic case with a set of bits, a charger and a holster for attaching to the belt.
The case is very small, where the battery is hidden in the handle without the expanding part, which facilitates work in hard to reach places.
The screwdriver has 18 tightening modes, including the drill function, so there is no need to carry another drilling tool.
Pros:
- very small in comparison with analogues;
- almost the whole body is rubberized;
- the battery is located in the handle and does not bulge;
- reverse for twisting;
- convenient switches at the top and on the side of the case;
- 2-speed gearbox to select the number of revolutions with permanent types of fasteners;
- 18 positions of torque;
- low vibration;
- 2 batteries included;
- the chuck will drill to 10 mm in diameter;
- the ability to create holes in wood up to 21 mm, and 10 mm in metal;
- illumination of the work area;
- charges in 83 minutes;
- weight 880 grams is convenient for ceiling work;
- there is a motor brake.
Minuses:
- the cost of 5300 rubles;
- battery capacity 1.3 A / h;
- no impact function;
- torque 24 Nm;
- no spindle lock.
Makita DDF453RFE - with a capacious battery and wide functionality
This is the best screwdriver for remote work from the outlet due to the battery capacity of 3 A / h, which allows installation for 6-8 hours, depending on the intensity of the action and the size of the fastener.
The keyless chuck is suitable for fixing not only bits, but also drills. Thanks to this screwdriver, it will be possible to drill holes in metal with a diameter of up to 13 mm. The tool has two speeds for quick setup.
Pros:
- intuitive modes, which are switched by a ring on the body with painted symbols;
- universal chuck for clamping bits and drills;
- rubber grip with perforation;
- 16 levels of torque;
- keyless chuck for changing nozzles;
- twisting force 42 Nm;
- reverse for dismantling;
- setting two speeds with revolutions of 0-400 and 0-1300 per minute;
- drilling in wood holes with a diameter of 36 mm;
- 2 batteries included;
- everything comes in a plastic case;
- it is fashionable to clamp the drill with a diameter of 1.5 mm;
- long battery life with a capacity of 3 A / h.
Minuses:
- a large battery at the end of the handle may interfere with work in hard to reach places;
- a weight of 1.8 kg is less convenient for long ceiling work;
- no backlight.
The best Makit screwdrivers
Such equipment comes in handy when mass fasteners, where you want to install a lot of screws on a large area.
As a rule, these are battery-powered models with the possibility of supplying a tape with inserted screws. The operator can only put it in the right place and press the start button.
Makita DFR550Z - for conveyor assembly of furniture or installation of partitions
This is the best screwdriver for large volumes of work, where screws from the store are automatically fed to the bat.
At the end of the provided mounting for the factory tape and install the length of the fastener. Then the “Auto” mode is activated and the tool independently moves the tape with screws under the bat.
Below there is a receiving chute, which takes the store away from the work surface so that it does not block the view.
Pros:
- high performance (having inserted a tape with 50 screws, they can be tightened in 50 seconds);
- comfortable D-shaped handle for secure hold;
- a lot of rubber pads on the case;
- there is a reverse;
- the spindle rotates up to 4000 rpm and the system of adjustment of revolutions is built in;
- work with screws from 24 to 55 mm in length;
- suitable for many models of 18 V batteries from Makit;
- ribbons from other brands can be used;
- numerous perforations for air cooling.
Minuses:
- no battery included;
- there is no charger;
- it is difficult to get used to the elongated, due to the feeder, dimensions after a conventional screwdriver;
- weight 2.3 kg;
- cost 12,500 rubles.
It will be interesting to friends too
