mylogo

Using a screwdriver, which is easier to drill, simplifies the task of assembly or disassembly, which requires the same type of work with fasteners. Interskol company produces the best screwdrivers, which have characteristics no worse than those of American and German counterparts, but at a more affordable price. We have prepared a rating of a popular tool in this category and a manufacturer that will help you choose models for professional or household use, depending on the tasks and volumes of work, and also not to overpay for just the name.

 

 

Screwdriver Interskol

The best cordless screwdrivers Interskol

With frequent changes in the workplace or very large objects, it is practical to use a screwdriver with a battery that does not limit the master in the area of ​​operation, and the wire does not pull the arm down during ceiling manipulations. The best models have wide functionality and reasonable price.

DA-12ER-01 - for tapping locks

DA-12ER-01 - for tapping locks

This is the best option for the field wizard in emergency opening or installing locks. The tool comes in a compact case that does not take up much space and protects against shock during transport.

The screwdriver is equipped with a quick-release chuck, so it is suitable for both quick disassembly of the door leaf, and for drilling in wood and metal. In order not to keep the flashlight in a dark room, right under the patron there is a wide diode.

Pros:

  • very compact model, which takes up little space;
  • most of the body is rubberized;
  • the clutch of switching of position is marked by clear drawings;
  • The battery is neatly hidden in the handle and does not protrude beyond its dimensions, so it is convenient to use a screwdriver in narrow areas;
  • reverse facilitates the removal of the drill or dismantling;
  • ergonomic handle allows you to tightly clasp the tool and conveniently press on it when using;
  • the capacity of the supply module 1.5 A / h allows you to work up to 2-3 hours;
  • 6 nozzles-screwdrivers included;
  • maximum torque occurs with a force of 28 Nm;
  • can be used for tightening screws with a diameter of up to 5 mm;
  • 2 speeds with rotation 0-400 and 0-1400 per minute;
  • weight 960 grams will not burden the hand;
  • when the trigger is released, the engine brake is activated;
  • spindle is locked with a button;
  • it is possible to create holes in wood up to 20 mm, and in metal 10 mm;
  • charges in 60 minutes.

Minuses:

  • there is no blow function to break the old screws;
  • Only one battery included.

YES-10 / 14.4M3-F T - with a lantern for any conditions

YES-10 / 14.4M3-F T - with a lantern for any conditions

This model will not allow stopping in the installation work, if electricity is lost on the object, since the best screw driver from Interskol has its own battery with the possibility of energy accumulation at 1.5 A / h and a backlight diode located below the cartridge, as well as a separate lamp on a similar battery, which is adjustable at different angles and stable on a flat surface.

This allows you to continue to work with drywall or dismantle even without the presence of electricity in the room.

Pros:

  • comfortable handle with rubber pads and protrusions;
  • keyless chuck in which you can fix both bits and drills;
  • the high button of a reverse does not allow accidental pressing at a grasp of the tool a hand;
  • perforation for cooling and long work;
  • rubberized lamp housing;
  • adjustment of the angle of inclination of the reflector;
  • 20 variants of torque with designations on the clutch ring;
  • quick change of nozzles thanks to the keyless chuck;
  • drilling wood in diameter up to 25 mm, and metal up to 10 mm;
  • setting the intensity of rotation from 0 to 400 and 0 to 1400 rev / min, which is practical with the same type of fasteners;
  • work with screws up to 6 mm in diameter;
  • spindle lock simplifies manipulation;
  • the transport case will preserve the integrity of the tool and the flashlight;
  • battery withstands operation at low temperatures;
  • twin bearings instead of sleeves;
  • the lamp works autonomously for up to 7 hours.

Minuses:

  • cost 6000 rubles;
  • a weight of 1.6 kg can create loads on the arm during prolonged work;
  • NiCd battery is self-discharging and has a memory effect;
  • only one battery.

ША-6/10 - for home workshop

ША-6/10 - for home workshop

This is a compact screwdriver, well suited for a workshop at home or in a garage. The battery is located in the handle and does not stand for its size, which allows you to put the tool even in your pocket. T-shape has optimal balancing.

The end of the compartment with the motor, as well as the handle on both sides are covered with rubber. Reverse allows the use of a screwdriver to disassemble appliances or furniture.

Pros:

  • two speeds switchable on the gearbox;
  • low current consumption from the battery 10 V;
  • thanks to the chuck, you can insert crowns for drilling wood in diameter up to 20 mm, and steel up to 10 mm;
  • backlight is directed to the working area;
  • the battery fully charges in 60 minutes;
  • 18 modes of torque;
  • 2 batteries included;
  • locking spindle;
  • battery with no memory effect;
  • suitable for 6 mm thick screws;
  • adjustment of speeds from 0 to 1500 rpm;
  • delivered in a case;
  • cost 4,400 rubles;
  • A small weight of 800 grams is convenient for long work.

Minuses:

  • twisting force 14 Nm;
  • no hit;
  • no fastening on the belt.

The best network screwdrivers Interskol

Such a tool is limited to the length of the wire or carrying, therefore suitable for private workshops, work in the house or other areas.

Unlike screws with a battery, it is more powerful and productive, which is often required for long and thick screws, as well as large amounts of work for a long period of time.

DSh-10 / 260E2 - for serial operations

DSh-10 / 260E2 - for serial operations

With such a screwdriver, Interskol will easily perform the same type of operations in the room, thanks to a convenient handle with an expander that prevents slippage, a powerful engine and direct power from the mains, which does not require control of the charge level.

Keyless chuck facilitates the permutation of bits, and also allows the use of drill bits. 20 modes of torque regulate the twisting force, depending on the density of the surface (wood, metal, plastic, drywall).

Pros:

  • high reverse button;
  • trigger lock to facilitate pressure with long rotation;
  • convenient switching of the rotation speed (0-450 and 0-1800 rpm) in the upper part of the body;
  • can clamp drills from 1.0 to 10 mm in diameter;
  • drill holes in the tree up to 25 mm;
  • can be used with thick screws 6 mm in diameter and up to 80-100 mm long;
  • 1.4 kg weight is acceptable for operation in a lower or vertical position;
  • the most affordable cost of a two-speed screwdriver is 2,400 rubles;
  • high power 260 watts;
  • economical current consumption.

Minuses:

  • the cord is only 2 m, which will necessarily require carrying;
  • products are delivered in a carton without a case;
  • longitudinal play of 0.5–2 mm can occur;
  • air flow blows in the face;
  • There are no bits in the kit.

Sh-8 / 700ER - power and simplicity in one

Sh-8 / 700ER - power and simplicity in one

This is the best Interskol screwdriver for combined work, where alternation of drilling and twisting is required. The model has a capacity of 700 watts, which allows you to give high speed when drilling.

The metal case reliably protects the important components of the tool, while the cost of the screwdriver is one of the most affordable 2,700 rubles. The nozzle on the chuck helps to hold the screw while pointing to the fixation point.

Pros:

  • electronic speed control system with the ability to set a constant speed by twisting the wheel on the trigger;
  • start lock button for long rotation;
  • clip to hang the tool on the belt;
  • reverse for dismantling;
  • the gearbox is covered with a metal casing;
  • suitable for self-tapping screws with a diameter of 6 mm;
  • develops 4,000 revolutions idling;
  • bits can be inserted without a cartridge to reduce the length of the screwdriver;
  • 3 m long network cable

Minuses:

  • only the back of the handle is rubberized;
  • single speed;
  • the wheel of restriction of turns slightly presses in fingers;
  • maximum torque of only 10 Nm.

It will be interesting to friends too

 

 

 


mylogo

Selection

Ratings