Recently, an increasing trend has been gaining popularity in engraving. However, it also requires the selection of the right tools. Not only the final result, but also the pleasure of the work itself depends on the choice of a quality tool for engraving - an engraver.
However, modern engravers are not only devices for applying engravings, but also multifunctional devices that are able to perform many other tasks, such as filing, milling, grinding, cutting and much more.
Content:
Engraver which company to buy
Defort
The engravers of this company are one of the most popular in Russia due to the successful combination of price and functionality. For home conditions most models of Defort are suitable. However, when choosing, it is necessary to carefully select each specific instance: there is a possibility that a defective item will fall.
Dremel
Multifunctional and powerful tool that is useful not only for home use, but also for working in a mini-enterprise, in a private business environment. The machines of this company are often acquired not only as engravers, but also as grinding devices. Especially they are loved by auto repair technicians.
Prorab
As the most inexpensive of the famous engravers fit models from this domestic manufacturer. But the low price in this case does not mean low quality. On the contrary, Prorab cars are very reliable and deserve all the attention.
Sturm
The relatively low price and at the same time practically “omnivorous” rightfully made the engravers of this company very popular among domestic consumers. As a rule, the bundle includes a large set of attachments, so that the buyer does not have to worry about where to get them extra.
However, when choosing an engraver, it is also necessary to take into account the purpose for which it is acquired. Whether it will be direct engraving or, for example, grinding. And if engraved, then by what material, and to what degree of detail.
Top engravers rating
For the compilation of the rating and the overall completeness of the product assessment, the following indicators were taken into account:
- equipment cost and capacity;
- the convenience of use;
- universality (complete set);
- performance indicators;
- safety of use;
- weight.
The most affordable engraver
For home use sporadically, perhaps, it makes no sense to purchase an expensive device. A kind of more or less universal model that meets most user requests is fine.
Bort BCT-140
For most of the needs of the home user, this model fits the bill. This is facilitated by the presence of a rich set of additional attachments.
Benefits:
- power is 32 000 revolutions per minute;
- a rich set of nozzles and all kinds of accessories included;
- small weight;
- comfortable grip.
Among the shortcomings, consumers noted the following:
- not every defect is “hard” for this engraver;
- strong heat during operation.
DEFORT DDG-140
Among the most affordable, you can also mention this model. It is multifunctional and at the same time is notable for reliability. However, it has its drawbacks, which will be discussed below.
Advantages:
- low price;
- adjustment of turns;
- the possibility of locking the spindle.
Disadvantages:
- poorly suited for wet grinding;
- if the nut attaching the collet fails, the entire shaft will have to be replaced;
- not too suitable for fine work;
- when working heats up very noticeably.
Most powerful device
If you want to grind or cut particularly "stubborn" surfaces, it is better to pay attention to the most powerful models of engravers.
DWT GS06-27 LV
Among the models under consideration, this is the most powerful. Although its price cannot be called too low, it has a capacity of 600 watts and can rotate at a speed of 27,000 rpm.
Advantages:
- high power;
- a rich set of nozzles and other devices in the kit;
- quiet work;
- superior build quality.
Disadvantages:
- not the lowest price;
- large weight of the device;
- the nut on the collet can be quickly damaged.
Dremel 8200
Universal and also one of the most powerful tools for all occasions.
Advantages:
- powerful drive, accelerating engraver to 35,000 revolutions per minute;
- universal;
- conveniently lies in the hand;
- There is a battery charge indicator.
The disadvantages noted by the users themselves:
- in some models there is a crunch of bearings at low revs;
- not the lowest cost;
- "Does not like" to work with large diameter discs.
The best engraver for home use
STURM GM2317FL
For everyday "amateur" use is just what we need.
Advantages:
- affordable price;
- small weight;
- ease of maintenance and use;
- There is a diode illumination.
Disadvantages:
- due to the fact that there is a shaft beat, STURM GM2317FL is not suitable for performing precise work.
Dremel Hobby Edition
This engraver, as the name implies, is suitable for home use - for hobbies and hobbies.
Advantages of Dremel Hobby Edition:
- light;
- fits comfortably in your hand;
- it is completed with stencils;
- You can adjust the depth of adjustment.
Disadvantages:
- quite strong noise at work;
- not the lowest price for an "amateur" tool;
- no flexible shaft.
The most accurate engraver
For extremely fine and even miniature works, not every engraver is suitable. Many low-cost models sin because they freely “walk” the shaft. So for fine engraving, they are clearly not suitable.
However, there are among not too expensive models worthy of attention.
DREMEL 3000-1 / 25
According to user feedback, this is one of the most accurate engravers. It is even suitable for creating jewelry and jewelry. In short, for works with fine finishes, one can hardly find a better model.
Advantages:
- convenience: sits in hand, "like a glove";
- there is no noticeable vibration of the shaft, which could interfere with the work;
- low noise;
- nozzles can be quickly changed without resorting to a key;
- practically does not heat up;
- The kit contains a sufficient number of unique attachments necessary for everyday work, a case for storage and transportation, as well as very detailed instructions.
Minuses:
- not quite cheap;
- If you buy the original consumables and nozzles, the purchase will cost "a lot of money."
The best universal engravers
If a “for all occasions” engraver is required, then, of course, you will need to take a closer look at unspecialized machines, which, perhaps, are inferior in something to highly specialized devices, but the user will not need to purchase a separate device for each case.
Bison ZG-130EK
As acknowledged by the buyers, this particular engraver is worthy of the title “The Most Universal”. Almost everything is “in the teeth” - from cutting off to polishing, carving, etc.
The advantages of ZG-130EK include:
- nozzles "for all occasions";
- ergonomic, comfortable in the hand;
- good build quality, long service life.
The disadvantages noted by users:
- not enough power for some "rough" work;
- at the same time the thick cord can interfere with work.
The fastest engraver
If work is required at really high revs, then it is necessary to select models for precisely this characteristic.
Dremel 4000
This model is good precisely because it allows you to work at elevated shaft speeds. However, this does not mean that the Dremel 4000 belongs to universal devices. On the contrary, it is not suitable for processing soft surfaces such as, for example, plastic.
Advantages:
- quite silent move for a machine with such high-speed performance;
- no shaft beat, which allows the model to be used for fine processing;
- 35,000 rpm is an impressive figure;
- speeds can be switched quickly and conveniently.
Disadvantages:
- due to high rotational speed consumables wear out quickly;
- the device is not suitable for working with soft and fusible surfaces;
- The price for the Dremel 4000 cannot be called low.
EG-145 caliber
Among Russian manufacturers can be noted model Caliber EG-145. This engraver also supports speeds of 35,000 rpm.
Advantages:
- high shaft revolutions;
- affordable price;
- low weight;
- The kit includes additional attachments and carrying case and storage.
Disadvantages:
- consumables wear out quickly;
- can get caught not too reliable copy, so here the buyer plays a kind of lottery.
Most miniature
If engraving on small objects is required, then it is logical to assume that the smallest engraver will be needed.
Ultratech Cordless Precision
A kind of unique machine, similar in size to a ballpoint pen. Ultratech Cordless Precision is intended solely for engraving, and only on small objects and for nothing more.
Advantages:
- original design;
- convenient location in hand and good ergonomics;
- the ability to apply the smallest engraving.
Disadvantages:
- narrow specialization;
- not too low price.
Which engraver to choose
As in most cases, it is extremely difficult to give universal recommendations here. It all depends on the purpose for which the engraver is acquired.
1. If miniaturization is required, Ultratech Cordless Precision will be the best choice. For applying accurate engraving - DREMEL 3000-1 / 25.
2. If the user is not exactly determined with the goals, or he needs “for everything and at once”, then Bison ZG-130EK should be preferred because of its versatility.
3. Those who like power - it is worth a closer look at the DWT GS06-27 LV. Well, for home use most often prefer models STURM GM2317FL or Dremel Hobby Edition.
4. Users with a limited budget are advised to purchase Bort BCT-140 or DEFORT DDG-140.
It will be interesting to friends too