The Japanese manufacturer Makita is distinguished by the stable quality of the power tools produced and the endurance of the devices even in the most severe operating conditions. Makita's best drills have proven themselves in construction, car service, repair and manufacture of furniture. With their help, it is easy to drill bricks, concrete, wood, plastic and even glass. Learn from the ranking of the most popular Makit drills for the above tasks, which will help you choose the best option based on user experience.
Makit's best unstressed drills
This tool is used for the manufacture and repair of furniture, fixing sheets of plasterboard and sidebar locks in the door. It is always useful at home and in the country. The key characteristics are the power and diameter of the drill.
Makita 6408 - with quick-release chuck for easy drill change
This is the best option for home repair due to the ability to change the diameter of the inserted drill keyless chuck. This is especially convenient when working at height, where all the manipulations on the change can actually be performed with one hand.
The tool has a wide hook on the case for hooking on the master belt, which simplifies the transfer or insertion of the material with two hands. A lock button on the side protects against accidental rotation when the trigger hits.
Pros:
- at idle the tool gives out 2500 revolutions per minute;
- high power of 530 W allows to drill metal and glass;
- when installing the crown, you can get a hole in the tree 25 mm;
- there is a reverse for unscrewing screws;
- there is a motor brake when the start key is released;
- keyless chuck;
- 2.5 wire length gives some freedom when maneuvering with direct connection to the outlet without carrying;
- 1.4 kg weight is acceptable for long-term work on a vertical surface;
- cost 4200 rubles;
- practical ring on the handle for hanging in place;
- adjustment of turns;
- work with one hand is allowed;
- low vibration.
Minuses:
- drills can be used only up to 10 mm in diameter for working with iron;
- the handle is not rubberized;
- badly drills the walls (brick, stone, concrete).
MAKITA 6300-4 - for the carpentry workshop
Such a tool is optimal for working on wood and glass, because it has a handle with a fully closed grip (D-shaped), which allows you to firmly hold the drill and easily press or remove the drill when working in a vertical or lower position.
The side grip is firmly fixed to the thread and provides a sure hold. The reducer in the metal case is reliably protected. When working with materials of different density, you can adjust each of the 4 speeds to the desired number of revolutions.
Pros:
- power is 650 W;
- chuck clamps drills from 1.5 mm to 13 mm;
- 4 speeds;
- cable 2.5 meters;
- slide switches;
- industrial chuck withstanding a large number of drill shifts;
- 30 mm drilling in wood and 13 mm in metal;
- turns are stabilized under load;
- starting voltage limiting;
- tripping safety coupling.
Minuses:
- the price is 15,600 rubles;
- the cartridge is unwound with a key that you need to carry with you;
- no blocking from accidental activation;
- no case, comes in a carton;
- weight 3.2 kg;
- no backlighting;
- at 4 speeds with a maximum of 1300 rpm;
- The second handle is attached only to the right or left.
Makit's Top Impact Drills
Such equipment is distinguished by a “drunk” bearing, which not only has a circular rotation, but also performs longitudinal movement, which creates numerous blows along the axis with the cartridge and accelerates the process of drilling solid materials.
Makit's best impact drills are used in construction and repair work for drilling bricks, stones or concrete in small quantities. They are also suitable for metal with wood.
Makita HP1620 - one of the most inexpensive
This is a popular model of the Makit impact drill, which costs 3300 rubles. It is possible to work with the tool as one, and two hands. To maintain and accurately guide, there is a second handle that can change the side of fixation due to the expanding clamp.
Switching of blow and usual drilling is carried out on the left part of the case. The key to the chuck is attached to a rubber loop on the wire, so it is always at hand.
Pros:
- rubberized wide band on the back of the handle;
- reasonable price of 3300 rubles;
- depth adjuster;
- The thought-over air cooling for work during the whole day;
- two modes of operation (conventional drilling and hammer drilling);
- the ability to make holes in metal with a diameter of 13 mm;
- adjustable speed range by pressing on the trigger with setting a constant key depth for a uniform material;
- drills up to 30 mm holes in wood, and up to 16 mm in concrete with impact function;
- improved reverse mechanism extends the life of the carbon brushes;
- 2800 rpm at idle;
- 44,800 strikes on the axis with a cartridge in a minute;
- can work in the drill stand (suitable for mounting);
- power is 650 W;
- The body is partly made of metal.
Minuses:
- to change the drill, you must use a key;
- only one speed.
MAKITA HP1631K (X2) - with drill set
This drill has a separate case with 18 drills, and the device is immediately ready for use after purchase.
The tool can be held with one hand, for which ergonomic depressions are made on the sides and a wide rubber insert at the back. For a more confident fixation, a second handle with an anti-slip stop is provided.
Power of a drill of 710 W allows to wield it on any solid material. Switching modes is performed from above by a flat tumbler.
Pros:
- Comes in a plastic case with an additional case and drills;
- keyless chuck improves performance with frequent material changes or the need for different hole diameters;
- body on the handle and sides covered with bumps to improve hand hold;
- place with gearbox edged metal;
- ring for hanging in place;
- the reverse facilitating twisting of a drill from long openings;
- in a tree it is able to make holes 30 mm, in metal 13 mm, in concrete 16 mm;
- 48,000 beats per minute;
- 3200 turns of the cartridge at idle;
- quality drills included.
Minuses:
- cost of 5,000 rubles;
- single speed;
- no depth gauge;
- 1 year warranty;
- a mass of 2 kg will tire your hand with long use.
MAKITA HP 2050 - with two speeds
This is Makit's best drill for professional use, since it has two speeds that can be quickly switched when working frequently with stone and wood, or metal and plastic, which eliminates the need for turning the wheel under the button and floating turns.
The tool body is half metal, which makes it more resistant to scratches and cracks in the fall. For maintenance with the second hand the rotating handle is provided.
Pros:
- power is 720 W;
- 2 speeds with adjustable from 0 to 1200 rpm and 0 to 2900 rpm;
- depth gauge included;
- ring for hanging;
- convenient mode switching at the bottom, which can not be accidentally touched;
- durable case;
- in the metal to turn out to drill a hole of 13 mm, and in a tree to 40 mm;
- built-in vibration protection system;
- drilling stone up to 20 mm in diameter;
- safety clutch;
- electronic adjustment of the number of revolutions;
- diameter of a neck of 43 mm allows to fix a drill in a rack of the machine on an arm;
- The metal case removes heat well during long-term operation, excluding overheating.
Minuses:
- key cartridge;
- cost 7,000 rubles;
- sometimes the shock mode is turned off spontaneously (knocks out);
- only one anti-slip pad on the back;
- heats up in work and actively evaporates the lubricant, so you need to check once a quarter.
It will be interesting to friends too
