14 best impact drills

Modern impact drills in many respects surpass standard analogs. With the help of operators, they are able not only to drill wood and metal, but also to hammer in solid material, to tighten screws, to knead concrete. Why buy a regular drill, screwdriver, hammer drill and mixer, if in most cases you can do with only one universal unit and do not overpay several times. But the replacement will be effective and complete only if the tool is upscale - at least one of the 14 best below.

Impact drill which company choose

It is difficult to buy high-quality power tools on the modern market, but not because there is none. On the contrary, there are many good products and choosing the best among them is not so easy.

The following are manufacturers whose impact drills deserve attention:

1. Bosch

2. Metabo

3. Makita

4. Interskol

Bosch is a famous German concern that supplies its products to more than 150 countries. Founded in 1886. It produces both amateur, painted in green color, drills, and professional - blue.

Metabo is one of the world's leading manufacturers of power tools, including impact drills. Its high-quality products are popular in more than 100 countries. The history of the German company began in 1924.

Makita is a world-famous manufacturer supplying its benzo and power tools to 160 countries. The company was founded in 1915 in Japan. He is the owner of 8 factories located on different continents.

Interscol is the number one tool manufacturer in Russia. Included in the union ERTA, has 6 factories in Russia, China, Spain. Development of models occurs in its own design bureau.

Top low-powered impact drills

N = 500 W

Bosch PSB 50 RE is a compact network model with a speed of up to 3000 rpm, a frequency of up to 48 thousand beats per minute, a torque of up to 8 N • m. It makes maximum holes: in metal - 1 cm; in concrete 1.3 cm; in a tree - 2.0 cm.

It is completed with an additional handle, lock on button, limiter of drilling depth. Reverse mode and speed adjustment are available. The additional handle is made of non-slip material, due to which it is convenient and comfortable to hold the tool.

Advantages:

• electronic speed control;
• practical carrying case, keyless chuck;
• small all, quiet move, compact, easy to use;
• ergonomic design, budget cost, durability.

Disadvantage:

• with strong dusting problems with the regulation of the shock mode and reverse.

In general, the reviews are positive, although it is noted that when tightening the screws there is not enough smoothness of the clamp. If the tool does not reach the professional level, then as a domestic one it fully satisfies the users.

N = 580 W

Interskol DU-580 ER is a network-operated household appliance with a plastic case, side handle and emphasis for drilling accuracy. In the presence of reverse mode and electronic setting of the rotation speed.

Performs in a minute 2,8 thousand turns and 45000 blows. It makes holes in wood, metal and brick, respectively, with diameters of 20, 13 and 12 mm. The tooling is fixed in the chuck with a key, for which a special place is provided under the handle.

Advantages:

• convenient location of the second handle, reverse button and turnkey “socket”;
• build quality, ease, convenience;
• reliability, durability, versatility, reliability;
• ergonomics, long service life, low price.

Disadvantages:

• poor cross in concrete;
• heating during prolonged operation (which is not surprising, since the device is a household appliance).

The machine fully meets user expectations, and with a margin. The operational indicators of the tool clearly cover the money spent on it.

N = 600 W

Metabo SBE 600 R + L Impul is a universal impact drill, characterized by 2.8 thousand rev / min, 50.0 thousand beats / min, 5 N • m. Able to drill Ø 1.2, 2.5, and 1.0 cm holes, respectively, in concrete, wood and metal.

The design is complemented by: supporting handle, hole depth lock, wheel for setting rotational speed, quick-clamping mechanism. In the presence of the possibility of reversing and disabling worn brushes. At the base of the wire there is a seat for tooling and a key.

Advantages:

• regular plastic case;
• reasonable design, smooth start, comfortable grip;
• reliability, safety, low noise;
• practicality of the pulse mode, ease of use;
• elegant body design.

Disadvantage:

• impractical cord, flimsy latch on the suitcase.

Users speak about the tool either well or very well. Rare complaints are connected with a cord or a suitcase.

N = 650 W

DeWALT DWD024S is a power tool with all important accessories: depth stop, side grip, electronic speed control. If necessary, works in reverse mode. Drills wood (Ø25 mm), concrete (Ø16 mm), steel (Ø13 mm), while giving 47600 beats / min of frequency, 2800 rpm of speed and 8.6 N • m of torque.

For performance of long work of the mechanism on the case the lock button is provided. Convenience of storage and carrying equipment is provided with a special holder.

Advantages:

• automatic shutdown when the brush is worn;
• the possibility of using in the drill stand;
• rubber vibration dampers, quality materials;
• compactness, low weight, soft start;
• nice design, long power cord.

Disadvantage:

• Chuck does not always firmly fix the drill.

As users note: a good machine - it copes with its tasks. At the same time, there are minor selective drawbacks that do not seriously affect the overall positive impression.

N = 690 W

Hitachi DV18V - shock model with a feature in the form of 2 speeds - 1 and 3 thousand rev / min. The rest of the car is similar to other analogues: 27,300 beats per minute; Ø2.5 cm holes for lumber, Ø1.3 cm for rolled metal, Ø1.6 cm for bricks and concrete.

There are functions of reverse rotation, adjusting the frequency of turns, turn off the brushes when worn. Completing is carried out by the second handle and the deep limiter - a plastic case is included in the set.

Advantages:

• rubberized handle; switch fixing button; the emphasis preventing the sliding of the palm;
• strong holding of equipment in the cartridge;
• smooth adjustment of speed;
• small weight, power, reliability, convenience;
• thoughtful ergonomics, adequate value.

Disadvantages:

• cable - short and hard;
• no safety clutch.

Users compare the tool with the workhorse - it drills everything, or almost everything.

The best medium power impact drills

N = 720 W

Makita HP 2051 F - 2-speed model with features: 1200 and 2900 rpm; 24 and 58 thousand beats / min; diameters of drilling of metal, concrete and wood, respectively, 1.3, 2.0 and 4.0 cm. Standard and individual options are available.

The first: auxiliary handle, depth pin, reverse mode, speed adjustment, switch lock. To the second belong: spot lights, anti-vibration system and safety clutch. In addition, special attention is paid to safety when working with the tool - the insulation has a pair version.

Advantages:

• regular suitcase, tripping clutch, rubberized handles;
• compactness, versatility, power, low noise;
• build quality, ease of use;
• small weight (for whom), durability.

Disadvantage:

• when working with concrete, the drills periodically “slip through”, and sometimes the cartridge is blocked.

One part of the buyers called the car normal, the other - excellent. Bad - no one thinks. So you can take - users recommend.

N = 750 W

Bosch PSB 750 RCE - impact network tool with fast-tightening chuck, duplicate handle, depth gauge and lock-off button. It has the functions of reverse direction of rotation, electronic speed adjustment, spindle fixation.

For carrying the plastic suitcase is provided. Able to drill concrete (Ø1.4 cm), steel (Ø1.3 cm), wood (Ø4.0 cm) with a torque of 10 Nm at 3000 rpm and 48000 beats per minute.

Advantages:

• the handles are finished with non-slip material;
• the drill not only drills, including a punch, but also tightens / unscrews the screws;
• universality, small-sized, convenience in operation;
• high quality, power, lack of vibration, easy and simple handling;
• ergonomic design, real price.

Disadvantage:

• the quality of the passage of concrete is not always “at the height” - it depends on the brand of the latter, moreover, it heats up during long drilling.

Excellent drill, surpassing most items in many of its price and technical segment. The ratio "price / quality / efficiency" when comparing is one of the best.

N = 810 W

Interskol DU-13/810 ER - electric device operating in 2 speed and frequency ranges: 13280 beats at 830 rpm, respectively, 32 thousand at 2 thousand. It makes a hole with a diameter: 13 mm - in metal, 35 mm - in wood, 16 mm - in concrete. It is completed with the usual elements: a backup handle, an off switch, a depth limiter, a speed controller and a reverse mechanism. The cartridge is used less convenient, but more reliable key type.

Advantages:

• built-in ventilation; long power cable - 4 m;
• the main handle with soft lining; magnesium alloy body;
• cool cartridge, convenient buttons and size;
• quality, versatility, power, reliability;
• optimal price.

Disadvantage:

• Not everyone is comfortable using the button on the main grip.

The tool, as users note, copes with almost all materials, and to the “excellent”. Often effectively replaces the punch. Due to the long cord there is no need for an extension cord.

N = 850 W

ZUBR ZDU-850 ERMK is a network model with the following characteristics: the frequency of shocks and turns - 44,800 and 2,800 per minute; Drilling in the timber - 2.5 cm, in the channel - 1.3 cm, in the brick - 1.3 cm. Additional components: second handle with a lock, 3-jaw key cartridge, a slider for switching modes, a ruler-depth gauge. The functions and capabilities include: reverse, adjusting the speed, fixing the mechanism in the on position. The device is transported in a regular case.

Advantages:

• a rubber-covered auxiliary handle plays the role of a tool case;
• the body is made of high strength alloy;
• the handle can be installed both on the left side and the right side;
• high-quality assembly, power, reliability, smooth running;
• modern design, long-term warranty - 5 years.

Disadvantages:

• not detected.

The above unit is a good-quality machine that “drills and drills with a bang,” in addition, it is safely stored and conveniently transported in a branded suitcase.

N = 900 W

Metabo SBE 900 Impuls - 2-speed hammer drill with the number of revolutions and blows - 3100 (1000) and 59000 per minute with a significant torque of 38 N • m. It works with ceramics, concrete, stone, plastic, wood and metal - it makes holes, depending on the density of the material, with a diameter of 13 to 40 mm.

It is equipped with a safety coupling, a measuring drill pin, an additional handle, and a transport case. It has the ability to reverse, electronic adjustment, lock the start key, the use of bits without the presence of the keyless chuck.

Advantages:

• possibility of installation on the drilling machine;
• engine shutdown when the brush is worn;
• long 4 meter cable;
• universality, power, safety;
• build quality and operation, pulse mode;
• cool ergonomics, durability.

Disadvantage:

• The “native” chuck does not always make thick drills.

Based on the reviews, only positive impressions about the tool are a powerful machine that can be used by any professional tasks.

Top High Power Impact Drills

N = 1010 W

SPARKY BUR2 350E - a network unit operating at speeds of 2000 and 800 rpm, frequency of 36000 beats / min, torque of 65 N • m - makes holes in various building materials within diameters from 16 to 45 mm.

Optionally it possesses: a depth limiter, a backup handle, a safety clutch, a speed regulator, a thrust ruler, a return mechanism, a key to the cartridge. It is used as a hammer drill screwdriver, mixer, constructive part of the drilling machine.

Advantages:

• automatic stop at exhaustion of a resource of a brush;
• magnesium body, motor cooling system, double insulation;
• sturdy manufacturing, good weight balancing, quiet gearbox, easy operation;
• power, reliability, high performance, longevity.

Disadvantage:

• outdated model, although it is popular.

The tool on the market is far from being the first year, but it is consistently in demand, since it is well-made, efficiently operated and affordable.

N = 1200 W

Interskol DU-22/1200 ERP - 2-speed popular model with a D-shaped handle. Drills steel (Ø2.2 cm), brick (Ø2.5 cm) and wood (Ø5.0 cm), mixes building mixtures, works in the machine stand with 34 thousand strokes and 2 thousand (1 thousand) revolutions per minute .

It has a side handle, depth stop, speed controller, start key lock, protection clutch, reverse mechanism. Drills are fixed in the chuck with a key.

Advantages:

• additional handle - long and rubberized; non-freezing rubber cord; reliable cam cartridge;
• does not jump out of hands, does not heat up, does not stop;
• power, convenience in work, smooth ride;
• thoughtful ergonomics, good price.

Disadvantages:

• flimsy gearbox and locking cog screw;
• sometimes bad lubrication.

The tool copes with its task perfectly, there is enough power for many works in abundance. True, there are small technical flaws that do not significantly affect the overall appreciation.

N = 1300 W

Bosch GSB 21-2 RCT is a power tool with a set of tools, functions and features: keyless chuck, auxiliary handle, speed controller, safety clutch, thrust ruler, as well as a reverse, lock off key.

Structurally combined with the drilling machine. Characteristics: 2 speeds - 900 and 3000 rpm; frequency 51000 beats / min; moment force 43 N • m; drilling diameters - from 1.6 to 4.0 cm. In case of brush wear, the mechanism is turned off.

Advantages:

• palm rest, rubber grip, suitcase included;
• maintaining constant speed, the presence of different modes, power control;
• good service;
• convenient design, power, adequate coupling operation;
• longevity - the warranty period is 3 years.

Disadvantages:

• not all and not fully understood the design and, as a result, management;
• expensive.

The car is good - it pays for itself completely. Buyers have an additional interest, how much will it still give profits.

N = 1400 W

Makita 8406 C - a powerful model with a key cartridge, designed to work at 64000 beats / min in 2 speed ranges - from 900 to 2000 and from 1800 to 4000 rpm. It makes holes in wood (Ø35 mm), concrete (Ø20 mm), metal (Ø13 mm) - while drilling in reinforced concrete structures a diamond crown (Ø15.2 cm) is allowed.

The kit includes: side handle, speed control, remote stop, safety clutch, mechanism for maintaining a constant speed, a carrying case. To work with the cartridge attached key.

Advantages:

• anti-vibration protection;
• brushes when worn off automatically;
• convenient location of the electronic adjustment selector;
• reasonable design, high-quality assembly;
• high power, durability, smooth start, no overheating;
• long service life.

Disadvantages:

• lack of reverse;
• short power cord.

Professional tool that runs all the materials, like "clockwork." In addition to the lack of reverse and short cable, there are no comments and complaints.

What kind of impact drill to buy

The choice and purchase of a hammer drill is interfaced with a preliminary solution of a number of problems. Firstly, the necessary type of instrument is determined - amateur or professional. The first can not work without stopping many hours a day - otherwise the drill will constantly overheat and may fail. Secondly, it is necessary to foresee with what (what) material to work. In addition, it is recommended to specifically stop if not on each of the above characteristics, functions and options, then at least on the main ones: power, number of revolutions and frequency of impacts.

1. If over time you need to drill 10 ... 20 holes for shelves, cabinets, paintings, Bosch PSB 50 RE will do.

2. For work on a country site where it is necessary to work with building materials, it is better to purchase Metabo SBE 900 Impuls.

3. If you need more serious power, the best option is Makita 8406 C.

In the presence of funds, you can always buy, for example, blue powerful "Bosch". But it should be borne in mind that a professional tool is always less versatile and more focused. Such a model is suitable for daily for a long time a large number of holes.