Screwdrivers are used for mounting and dismounting with screws and self-tapping screws. A separate area is the electric sphere. The tool is divided by the form of the sting into flat, cross and star-shaped, which corresponds to the fastener head. We have prepared a ranking of the best battery, dielectric, impact, reversible and indicator screwdrivers that will help you choose the right one for a particular type of work.
Content:
Best cordless screwdrivers
Such a tool is used with large amounts of work to relieve the operator from repeated mechanical rotation.
The equipment is battery operated and has torque and stiffness indicators that are important to consider when choosing.
AEG SE 3.6 Li 413165 - suitable even for furniture assembly
This is the best compact screwdriver on batteries, which is convenient to take with you for disassembly and assembly of furniture at the place of work.
Power is supplied from the battery with a capacity of 1.5 A / h, which is equivalent to the performance of some screwdrivers, but the mass of the device is only 2 kg. On the front part there is a rigidity adjustment twist snap. The reverse function is convenient for dismantling.
Pros:
- economical consumption of charge voltage of 3.6 V, which allows the use of a screwdriver for 30 minutes;
- metal housing around the gearbox;
- narrow design is convenient for access to limited places under the shelves and inside cabinets;
- charges in 30 minutes;
- torque stiffness is 6.5 Nm;
- there is a reverse function;
- the battery is removable, so it can be replaced during operation or after the end of its life;
- spacious case;
- 2 speeds.
Minuses:
- cost from 4500 rubles;
- rough handle with a minimum of rubber linings;
- Large dimensions of 378x261x117 mm are harder to wear on a belt or in a pocket.
SPEC-BAO-3.6LI - with a turn of the body
This is the best rechargeable screwdriver for access in difficult places, because its body is able to rotate and change the shape of a pistol in a straight line. For this, a fixing button is provided that unfolds half of the part with the gearbox.
The wide start key is convenient to press in both positions. The front of the metal. To avoid falling, a wrist strap is provided.
Pros:
- cost from 1100 rubles;
- backlight diode on the body;
- lightweight 900 grams;
- 4 bits included;
- 2 drills in the set;
- compact dimensions 210x160x65 mm;
- turns up to 180 per minute;
- battery capacity 1.3 A / h;
- Economical charge consumption due to consumption of 3.6 V.
Minuses:
- the battery is not removable;
- there is no adjustment of turns;
- torque is limited to 2.5 Nm;
- only 1 speed;
- Comes in a metal box, not a case.
Best dielectric screwdrivers
This tool is used to work with current-carrying contacts and protects the master from electric shock.
Thick insulation is applied not only on the handle, but also on the metal rod to the very shank. When choosing the length and material of the product.
Enkor 19697 PH2x125mm - the most affordable
This is the best dielectric screwdriver for working with sockets and wiring for home repairs, because the price is only 80 rubles.
The tool shaft is made of chrome-vanadium steel, and therefore is not susceptible to corrosion and will withstand the load when the screws are tightened. The handle is quite convex, which allows you to tightly clasp it with your hand for more effort.
Pros:
- insulation is made to the very shank;
- suitable for voltage up to 1000 V;
- magnetized tip helps not to lose small fasteners when working in narrow channels and recesses;
- tip type Phillips PH;
- large-sized slots will fit different screws;
- length 125 mm is convenient for recessed arrangement of contacts in the shield;
- a weight of just 110 grams will not overuse the hand;
- bright design will help you quickly find it among other tools on the rack;
- at the end there is a hole for fasteners on the wall.
Minuses:
- you cannot knock on the handle;
- low emphasis between the handle and the rod.
SHTOK 1000B Ph2x125 mm 09206 - with special shank strength
Such a screwdriver will be best for working with fasteners that need to be screwed into hard materials, because the shank has a hardening capacity of 58 HRC. At the same time, the handle and the rod are covered with a dielectric material calculated up to 1000 V.
On the surface of the red rubber grooves are provided to prevent slipping in sweaty hands.
Pros:
- universal length of 125 mm is suitable for most types of work;
- cost from 145 rubles;
- an oval hole at the end allows you to hang the tool on large nails or attach a cord to it;
- chrome-vanadium steel rod;
- weight is only 90 grams;
- magnetized tip;
- 3 year warranty;
- ergonomic cutouts for fingers;
- faces on the intermediate ring for precise rotation and control of the number of revolutions.
Minuses:
- can not knock on the butt.
Top impact screwdrivers
This type is used for unwinding of old compounds that have managed to rust or stick.
The rod has a direct internal connection with the nickle, which allows striking the butt to transfer force to the fasteners. When choosing pay attention to the length of the rod and the size of the slot.
Jonnesway SL D70S5100 - for key scrolling
This is the best impact screwdriver, because it allows you not only to hit the butt without harming the handle, but it also has a faceted penny, for which it is convenient to grip the element with a wrench and turn it with more effort than the human hand can reproduce.
For a firm hold, protrusions on the rubber part are provided. The stop before moving to the rod helps to exert a small amount of force when tightening.
Pros:
- rubberized handle with protrusions;
- rod 100 mm long suitable for various tasks;
- weight of 100 grams is optimal for wearing on a belt or pocket;
- can withstand heavy loads and has a long service life;
- can rarely be used as a chisel;
- faces under the adjustable wrench;
- steel resistant to aggressive substances.
Minuses:
- cost from 300 rubles;
- the tip is not magnetized;
- cannot be used on current-carrying contacts;
- Only for self-tapping screws.
Top reversible screwdrivers
This type is used for installation, where often fasteners of various shapes and sizes. In order not to carry a lot of screwdrivers with you, use a reversible one with a set of bits. When choosing an important number of nozzles and the length of the main rod.
Vira 302012 - with 6 bits included
This is the best reversible screwdriver for assembling and disassembling complex assemblies, because it includes 6 bits for straight and figured milling on the heads of screws. At the same time the price of such a set is only 230 rubles.
The ball-shaped end of the handle reduces the load on the master’s hand and makes it easier to stop. The wide form of the handle is convenient for girth.
Pros:
- equipped with a ratchet mechanism;
- the slots vary with nozzles and fit 3 types: SL, PZ, PH;
- chrome-vanadium steel core;
- weight 200 grams;
- reinforced telescopic design;
- high-quality ratchet mechanism;
- thanks to the rubberized coating does not slip;
- improves performance
Minuses:
- large dimensions 290x100x40 mm;
- the tips are not magnetized, and therefore can lose snap;
- not designed to work under voltage.
Top Indicator Screwdrivers
The tool is used as a device for determining the presence of current in the contacts and wiring. Slots on the end allow you to unscrew or tighten the screws of small diameter, which are energized. Lightweight for easy carrying. When choosing the length of the device and the quality of insulation.
HAUPA 100700 VDE / GS 125-250V - in the form of a ballpoint pen
This is the best screwdriver with indicator for constant carrying with you, because in size and shape it is made like a ballpoint pen that fits in the top pocket of a shirt or a working jacket. The German brand has a clip for hanging on clothes, and a ring for attaching to the wall.
Pros:
- cost from 200 rubles;
- conical shape facilitates access to bottlenecks;
- limiter in the middle to prevent accidental slipping of fingers on current-carrying parts;
- a wide window with the indicator can be clearly seen from different angles;
- weight is only 40 grams;
- There are no glare that can be falsely recognized as a trigger;
- bright diode;
- The black color of the insulation contrasts well with the luminescence of the diode.
Minuses:
- recognizes only voltage from 125 to 250 V (110 V will not show, but such a current can cause harm to a person when touched);
- To make the device work, you must constantly keep your finger on the contact panel next to the indicator.
Stanley 100-500V PRO 200MM 66-120 - with a wide range of sensitivity
This is the best screwdriver with indicator, which has a wide range of voltage recognition. The device will show the presence of current from 100 to 500 V, and at the same time it will not burn from overload. The screwdriver is well suited for an electrician who works with both single-phase and three-phase mains.
Pros:
- weight of 30 grams is comfortable to carry in your pocket;
- able to show high voltage up to 500 V without ensuring contact on the plate;
- cost from 125 rubles;
- metal clip;
- contact plate at the back, which is optimal for touching in all positions;
- chrome steel blade;
- insulation to the very end of the shank.
Minuses:
- 230 mm length can be inconvenient for positioning in a breast pocket;
- in view of a completely transparent case, it may glare;
- paly diode.
It will be interesting to friends too
