The angle grinder of small diameters is equipped with discs of 115 or 125 mm in the form of circles of different thickness. Used disc or disk equipment. Abrasive material - corundum, diamond powder, steel or brass wire. The tool is designed to work with thin-sheet or small in the transverse size billets of solid materials. Performs cutting, grinding, or stripping operations. It is divided into household and professional.
Content:
The best angle grinders of small diameters among household
Household angle grinders are distinguished by a simpler design, a smaller resource, and a longer working period.
They have limited functionality and a list of options that increase the accuracy and the ability to select a processing mode. The engine has less power and speed.
Kolner KAG 115 / 500M - very cheap tool
Inexpensive grinder for short-term operations on metal billets and semi-finished products. It has the lowest price among analogues. Provides a mechanism for accidental start. The work is facilitated by the installation of an additional handle on both sides.
Equipped with a regular disc with a diameter of 115 mm. When the protective cover is removed, it is possible to use larger circle sizes, but it is necessary to carefully observe safety precautions and close the trowel shield.
Pros:
- The lowest price.
- Suitable for occasional work.
- Disk included.
Minuses:
- Only for small loads.
- Build quality is lame. Little grease in bearings.
Caliber 125/955 - simple and practical
Inexpensive angle grinder for performing basic operations: cutting metal blanks and parts, removing burrs, blunting sharp edges, grinding and cleaning the surface.
It is used for home repairs, your own garage or cottage. The possibility of independent and quick change of brushes due to a well-thought-out mechanism. Regular disk 125 mm.
Pros:
- Comfortable, practical, does everything.
- Low cost.
- Power, compact size.
Minuses:
- A sharp start, almost with a jerk.
- Cable is a bit short.
BORT BWS-500-P - Bulgarian for country house and home
Compact, lightweight tool for working in your own garage, house or garden dacha. A moderately powerful engine and high revolutions allow working with all types of metal, composite materials, plastic and wood.
Provided for locking the start button for long work. The protective cover is installed and fixed without the use of additional equipment. Operated with a 115 mm disc.
Pros:
- Complete set, fast development of the Bulgarian.
- It is optimal for the garage and cottages in other places.
- Lightweight and compact, convenient to manipulate.
Minuses:
- Handle without rubber coating.
- Through, mind you, a small button, it is inconvenient to turn on with gloves.
SPEC-BSHU-850 SPEC-1504 - power and ergonomics
UShM household series with a disk of 125 mm. Equipped with a powerful electric motor. The case is made in a convenient ergonomic design, allowing you to conveniently and securely fix in your hand. Differs advanced motor life.
The spindle is locked from turning when replacing the grinding tool. It is used for cutting operations, grinding and polishing work.
Pros:
- Reliable and powerful engine, excellent speed.
- It is very convenient to hold in hand due to the small diameter of the case.
- Acceptable price.
Minuses:
- Save on lubrication of bearings and gearbox.
- A longer cord is required.
PATRIOT AG 122 - multifunctionality
Universal tool for a disk of 125 mm.Differs in multifunctionality: works on metal, stone, composite materials, wood and plastic. Used for stripping and peeling operations. Grinds and polishes the surface. Cuts the workpiece.
Convenient access to brushes for quick replacement. Electronic adjustment of turns allows you to select the optimal processing mode, depending on the material being cut or cut.
Pros:
- Cuts metal, stone, concrete. It is applied on tile and porcelain.
- Adjustment of turns, anti-vibration handle, convenient hold.
- Sophisticated layout and ergonomics.
Minuses:
- Collectors save on lubrication, you must immediately check and report.
- No SDS - nuts.
Bosch PWS 1000-125 - almost professional tool
Angle grinder equipped with a reliable electric motor with a long lifespan. Provides efficient cooling for overheating protection. Used with a 125 mm disc.
A shock-free entry into the work is provided by the function "Smooth start". For comfortable work of the operator the tool is completed with the anti-vibration handle. Changing the position of the casing is carried out without additional equipment. Mounted spindle lock to change the disk.
Pros:
- Powerful Bulgarian, high-quality assembly.
- Speed, reliability, reliability.
- Conveniently lies in the hand plus anti-vibration handle.
Minuses:
- There is not enough adjustment speed.
- The ability to install the side grip in just two positions. Coaxially drive can not be screwed.
The best angle grinders of small diameters among professional
Professional grinders are designed for long-term work in difficult conditions of construction and production workshops. Equipped with engines of increased power and increased service life.
Added options for protection against overheating and jamming. It is possible to adjust the speed, smooth start and maintain constant performance at variable load.
Einhell BT-AG 500: inexpensive among professionals
Compact, at an affordable price, professional angle grinder is equipped with a circle with a diameter of 115 m.
Helps to mount steel or plastic piping in the house or garden. The reducer is reliably protected by a metal insert.
Pros:
- Price among professionals.
- Good balancing, can be controlled with one hand.
- The build quality, ergonomics of the case, is comfortable to hold.
Minuses:
- The cord is plastic, hard.
- From the configuration, except for cars, box.
Ryobi EAG600RS - very easy tool
Qualitatively assembled, compact and very light instrument of the professional series. Equipped with an unpretentious, moderately powerful electric motor with a good service life. Protection against overheating due to effective ventilation.
Low weight allows you to work on outstretched arms in a vertical plane, including the ceiling. Equipped with a regular disc of 115 mm.
Pros:
- Compact and lightweight Bulgarian. It is convenient to work at height and with one hand.
- The optimal length of the cord does not hinder movement.
- High-quality assembly, high-speed.
Minuses:
- Noisy.
- Tight button, poorly fixed.
Hitachi G13SS2-NU - for home workshop
The tool of a professional series for works on metal and metal products. Cuts through grooves in concrete and brick, Divides tile and porcelain. With replaceable accessories grinds, peels and smoothes, polishes surfaces.
It is completed with a disk of 125 mm. Protection against splinters and fiery sparks is provided. Comes with a diamond disc in the kit.
Pros:
- Reliability, quality, endurance.
- Can be controlled with one hand.
- Performs all work in the home workshop.
Minuses:
- Plastic cord dubeet in the cold.
- Limited in power.
Interskol UShM-115/900 - Bulgarian for part-time work
Simple in design, professional tool. It is completed with disks with a diameter of 115 mm. Equipped with floating switch with the possibility of fixation. It provides more comfortable work.
Allow, when field work on the object, clean and remove the old coating. Removes rust. Grinds or polishes the surface. Cut to size pipe fittings.
Pros:
- Simple, no frills and claims tool.
- When cutting concrete, easily overcomes reinforcement.
- Convenient on-site part-time work.
Minuses:
- The problem with spare parts.
- Would not hurt the adjustment of speed.
Fiolent MShU2-9-125E F0047 - optimal for building a house
The unit with a full range of options: the function "soft start", electronic adjustment of speed, maintaining a constant engine performance with a floating external load. Works with a regular disk of 125 mm.
The aluminum gearbox housing can be installed by turning it 90 ° to provide greater possibilities. Easy and easy access for replacement brushes.
Pros:
- The combination of price, options and functionality.
- It is fully justified in the construction of your own home.
- Protection gear. Engine ventilation from overheating.
Minuses:
- Protection against blocking is very sensitive.
- PVC wire dubeet at + 5 °.
Lepse MShU-0.8-125 - multifunctionality
The tool equipped with a disk of 125 mm, completed with the powerful engine. Performs cutting, grinding, peeling operations. Performs grinding, polishing of various materials.
Plots in concrete, brick. Cuts tile and porcelain. Equipped with the option "Soft start". Maintains a constant motor at variable external load. Regulates the number of revolutions.
Pros:
- Domestic high quality product manufacturing.
- Solid, durable tool for a wide range of works.
- Smooth entry into work, quick-release casing.
Minuses:
- The casing lock is not thought out, it stands for the gear case
AEG WS13-125XE - Workhorse
Professional Bulgarian with a powerful engine. It is intended for long work in the conditions of building, production. Used with a circle of 125 mm. It processes concrete, stone, brick, ceramics, metal, plastic and composite materials.
It has an extended package of options: soft start, speed adjustment, engine constant support. It is completed with a convenient anti-vibration handle. A special quick-lock nut was used to change the disc.
Pros:
- Power, functionality combined with an affordable price.
- Easy to use, reliable as a Kalashnikov assault rifle.
- Anti-vibration handle, convenient nut for changing discs.
Minuses:
- It is necessary to put shlus lubrication in the gearbox. Reliability increases, noise is significantly reduced.
- It seems too heavy.
Makita 9565 CV - dust protection
Compact, convenient, with excellent ergonomics tool. Equipped with a powerful and reliable engine with increased life and protection from dust. The slip clutch is used for smooth, smooth operation.
Built-in speed control, soft start and support constant engine performance with a floating load. LBM is designed for intensive operation throughout the work shift.
Pros:
- Small spool yes expensive - powerful and compact Bulgarian.
- Reliability, duration of work.
- Options
Minuses:
- It is completed with an ordinary handle and a clamping nut.
- Case would not hurt.
Metabo WEPBA 17-125 Quick - a true professional
Very powerful, productive unit. Equipped with auto-balancing function to reduce vibration. Built-in automatic brake to quickly stop the disc after shutdown. There is an automatic shutdown of the engine after the wear of the carbon brushes.
The Bulgarian has protection against accidental starting and overheating of the tool. It is completed with a special fast-locking nut for changing the cutting disc.
Pros:
- Excellent safety, technical capabilities at altitude.
- Excellent functionality, indeed, a tool of the Pro series.
- Quality in everything.
Minuses:
- Negative aspects of consumers are not detected.
It will be interesting to friends too