Hand tools for processing wood blanks and derivatives based on it, - plywood, chipboard, MDF, OSB, composites. Perhaps the use of various types of metal and plastic. The principle of operation is based on the removal of a small layer of material moving abrasive tooling. The difference in application is reflected in the design of the grinding machine, the method of influence on the surface to be treated, the power of the electric motor. Widespread tape and brush devices.
Content:
The best household grinding machines for wood
Limited by engine power, duration of work, functionality, list of operations. It has a low price, affordable to a wide range of the population.
Caliber LSHM-750 - affordable, with good capabilities
The tape machine, equipped with a powerful electric motor, is applied to the processing of flat surfaces: wooden parquet, planks, timber. Removes lacquer, old paint, cleaned wooden pile.
Equipped with engine overheating cooling system. Provided for connecting a vacuum cleaner. Can be attached to the workbench, forming a small grinding machine.
Pros:
- Ability to adjust the position of the abrasive belt during the working process.
- Power, reasonable price.
- Compact size, acceptable weight.
Minuses:
- Noisy, howls like a jet plane taking off.
- Rough case design.
BORT BBS-801N 93728007 - good for home repairs
Hand tools for home use: polishing wooden blanks, preparing the floor, repairing furniture and many other operations.
The machine is equipped with an electronic processing speed adjustment mechanism. Provided dust collector for the concentration of sawdust. Application on metal and plastic surfaces is possible. Long-term operation is provided by the lock of the start button.
Pros:
- The thought-over design of a grinder, reasonable price.
- Efficient and convenient dust collection system, speed adjustment.
- Fast, trouble free sanding belt replacement.
Minuses:
- The tool cover is not fixed, falls, uncomfortable.
- The gutter of dust to the left, towards the operator, most people are right-handed.
PATRIOT BS 810 - optimal for finishing wooden buildings
Efficient belt sander with high performance. Allows for a short time to remove a layer of material from a large area. The best tool for the construction of wooden buildings.
The long work is promoted by the powerful and reliable electric motor, the ergonomic case with two convenient handles. Provides a lock mechanism against accidental inclusions.
Pros:
- Easy, powerful and reliable grinder.
- There is a speed adjustment.
- Convenient replacement of tape and brushes. Good grade.
Minuses:
- For work on horizontal surfaces is not enough weight.
- Insufficient cable length, you have to use an extension cord.
Sturm BS8511U - the most powerful among household
The most powerful tool among household analogues. Easily cope with grinding wood of various types of wood. Cleans solid parquet lacquer, works on metal. Provided for locking the start button for long work.
Confident and reliable grip contributes rubber coated grip. Compact dimensions allow processing in hard to reach places.
Pros:
- Power, performance, speed control.
- Ability to use as a stationary grinder.
- Price, grade.
Minuses:
- Without a tool the tool would not have lost anything, - the construction is tight and poorly fixed.
- No adapter under the vacuum cleaner.
Bosch PBS 75 AE - good grinding area
The household tool with additional functional options, approaching model to a professional class. The design includes a soft start mechanism, adjustment of the speed, a device for automatic centering of the abrasive belt.
The reliable and powerful electric motor allows to process the big areas of a wooden or metal surface. Optimum weight and good balancing facilitate operator labor.
Pros:
- Smooth start, speed adjustment, centering tape.
- High-quality assembly, ergonomics of the case and handles.
- Performance, large grinding area.
Minuses:
- Hard oak cable.
- Blowing air with dust towards the operator.
The best professional grinding machines for wood
Differ in big motor potential, duration of work. Able to handle increased surface area. They have advanced functional capabilities, a powerful electric motor.
Black Decker KA 88 - the ability to work close to the side surface
Professional belt grinder is designed for processing large areas of wooden products: furniture panels, parquet and plank floor, wall cladding.
The body is made for the maximum approaching of the sanding belt to the side surface - the finishing of the corner joints is provided. A protective mechanism is provided to protect against damage to the wall. The body of the machine is made of impact-resistant plastic.
Pros:
- Easy, long cord, self-adjustment of abrasive tape.
- Tight fit to the side surfaces.
- High impact plastic on the body, withstand falls.
Minuses:
- It is very difficult to change brushes - the mechanism is not thought out to the end.
- Belt of a rare standard size.
Ryobi EBS 800V - setting the handle in four positions
Belt sander with adjustable position of the support handle to create optimal conditions for work. The abrasive belt is changed by a simple lever mechanism.
Reliable and durable, with protection against overheating, the electric motor allows you to handle a wooden surface with great speed. Convenient for sharpening knives, axes and cutting tools with a flat blade.
Pros:
- Powerful, high performance.
- Comfortable ergonomic handle with a change of position.
- Universality, - on a tree, metal and plastic.
Minuses:
- Dust collector channel clogged.
- It is necessary to lubricate the bearings, a little oil.
Makita 9910 - excellent balancing of each node
Professional series tool with excellent balancing of all nodes. Good ergonomics of the case and handles. It is completed with a volume bag for collecting shavings and dust. The "Start" button is installed on the main handle, has a lock for the convenience of the operator.
There is a well thought-out mechanism for quickly changing the sanding belt. The design of automatic centering ensures the precision of the abrasive tooling.
Pros:
- Ease of use, the ability to operate with one hand.
- Reliability, build quality.
- Good balancing, comfortable body.
Minuses:
- Not enough power.
- There is no speed adjustment, but not critical.
Hitachi SB8V2 - with electronic adjustment of turns
The device with the powerful engine for works on wood of various density and hardness. Grinds metal and plastic. It is used to fit the sides of the front ceramic brick. Perfectly peels off the old paintwork.
The optimal mode is provided by an electronic speed control. The design allows you to handle the plane close to the adjacent side surface.
Pros:
- Power, work on oak, beech, larch.
- Dust collector, adjustment of turns.
- Reliability, sturdy case.
Minuses:
- Poor balancing, falls on one side.
- Too heavy for vertical, especially under the ceiling.
AEG HBS 1000 E - with additional control options
Grinding tools with an extended list of control options: the “Smooth start” function for shock-free operation, electronic adjustment of the machining speed, maintaining the motor constant when the external cutting load changes.
Increasing the abilities of the grinder increased the accuracy and cleanliness of the surface finish. The optimal mass for processing horizontal planes - the machine itself presses itself to the surface, it is enough to give the desired direction.
Pros:
- Performance, the choice of grinding mode.
- Good weight, snug fit.
- Soft entry into work.
Minuses:
- Dust removal leaves much to be desired.
- Unreliable toothed belt drive.
Metabo BAE 75 - high quality processing
Professional unit for high-quality surface grinding. It is provided by the choice of the processing mode: a mechanism is provided for changing the cutting speed and maintaining constant parameters of the engine when the external load changes.
The ergonomic design of the case allows you to work with your left or right hand, which is convenient for continuous processing of large areas. It is possible to use as a stationary machine when fixing the bed to the workbench.
Pros:
- Excellent surface quality when grinding.
- Mode selection, maintaining a constant motor under load.
- Equipment.
Minuses:
- There is no case or case for storage and transportation.
- Perhaps the cost.
Bosch GBS 75 AE - with partial transformation
Professional-grade belt grinder. It is intended for processing flat horizontal, vertical or inclined surface. The ability to dismantle the front support handle allows you to work near adjacent edges.
The machine is completed with an additional plate with a graphite coating. The duration of the work is ensured by the high quality of the assembly, metal gears and a reliable timing belt.
Pros:
- The ability to work tightly to the side surfaces of any side.
- Endurance, reliability.
- Performance, efficient engine cooling.
Minuses:
- The graphite plate bends with additional pressure.
- Tape fixing lever weakens after a year of use.
The best brush machines for wood
The design of the machine is designed for surface treatment of blanks and parts made of wood, plywood, metal and composites. The principle of operation is based on the transmission of torque from the electric motor - a brush with abrasive properties.
In addition to stripping functions, it is used to create decorative surfaces, for example, imitation of aged wood.
Interskol MSh-110/1010 - smooth or structural grinding
A tool for the formation of matte (satin), rustic or brushed surface of wood. It is used for grinding or polishing works on metal, plastic, wood of different density.
The machine is equipped with two handles for reliable fixation in the hands. The start button is located on the main handle for operational control.
Pros:
- Applicable to different materials.
- Creating a decor on the surface.
- Powerful, comfortable grip.
Minuses:
- Periodically there are problems with removable accessories.
Sturm AG1014P - Power
Brush grinder with a full range of options: smooth start, adjusting the speed, maintaining constant characteristics of a powerful electric motor during processing, locking the start button.
Efficient engine cooling is provided for overheating protection. It is used for stripping, cleaning the surface of efflorescence, rust. Creates a decorative smooth or embossed structure.
Pros:
- Cheap and cheerful: power, reliability, functionality.
- Simple change of equipment.
- Multifunctional.
Minuses:
- Flimsy casing, requires revision.
- Lock button sticks.
Bosch PRR 250 ES - high-quality processing of curved surfaces
Compact tool for working with various materials and surfaces, including those with a curvilinear profile.
The motor has an impressive lifespan, aided by effective ventilation for cooling. A wide range of interchangeable accessories is available for the typewriter. The latter is easily changed through a special SDS system.
Pros:
- Comfortable on uneven surfaces.
- Good equipment nozzles.
- Ergonomics, comfortable grip.
Minuses:
- After the drawdown of regular components, replaceable hard to find on sale.
- Dust.
Makita 9741 - optimal for home workshop
The grinder for a permanent job in house, and not only, a workshop. Works on wood, metal, composites and plastics. Performs rough and finish grinding, peeling and grinding operations.
For sure holding of the powerful tool in operating time two handles are provided. Longitudinal equipped with a start button with the ability to lock. The size of the layer to be removed is regulated by a preliminary exhibition of the grinding depth.
Pros:
- Reliability, quality, power.
- Effective dust removal, fast braking.
- Comfortable grip.
Minuses:
- Very expensive replacement equipment.
- Corners cannot be processed.
Metabo SE12-115 - for commercial use
High-performance grinding tool. Duration of work is provided by a specially developed electric motor operated in severe conditions. Provides effective ventilation from overheating.
Implemented overload protection. Removed random restart. Automatically off when worn carbon brushes. It is completed with the wide range of replaceable nozzles.
Pros:
- Endurance, big motor potential.
- Good grade.
- The choice of cutting modes, smooth start.
Minuses:
- Negative impression of the cost of the kit.
It will be interesting to friends too
