The metal tile has collected in itself all the best in terms of the beautiful shape and practicality of the relief from the tile, as well as the strength and resistance to stress and weathering of the metal. Roofing material is made from steel sheets that are coated with a layer of zinc and a primer to protect the iron from corrosion. Then a decorative coating is applied on top, giving color and shine to the surface. From the ranking of the best metal tiles, you can see popular materials for creating the roof of a private house, cottage, office building, gazebo, various canopies and canopies.
Best metal tiles monterey
The metal tile is divided by type of profile. Monterey is a classic of style and has pronounced waves with a rounded top, which contributes to the smooth melting of wet snow and water. Such materials can be mounted on the roof of various sizes at a minimum angle of the slope.
Grand Line Optima Classic Satin 0,5 mm RAL 8017 - for all types of visors
This is the best metal tile for arranging various types of visors, because the smooth wave shape ensures easy snow melting at a slight angle of inclination. The chocolate shade will look especially beautiful on a white or beige building.
Due to the wide distance between the waves, it is convenient to mount the sheets into the batten. The gap on the surface is high and reliably covers the edges of the previous row. A mass of 4.5 kg per square meter will not overload the wooden frame.
Pros:
- the amount of zinc in the base has an indicator of 140-180 g / m2, which reliably protects the steel from corrosion;
- The satin finish provides a long lasting chocolate color due to the polyester in the composition;
- decorative layer thickness 25 microns;
- 23 mm high waves withstand high deposits of snow, but they do not stand out too much with relief, which forms a neat appearance, especially suitable for small canopies;
- The 350 mm wave step is convenient for fitting the shape of the roof to any size;
- Available in sheets from 500 to 6500 mm in length, which is practical for large and small objects;
- thickness of the steel layer 0.5 mm gives decent strength;
- the material is allowed to cut in increments of up to 10 mm, which provides unlimited possibilities for forming and joining anywhere in the roof;
- ductility helps with styling.
Minuses:
- cost from 360 rubles per m2;
- It should not be used on structures with open arches below, because the decorative coating is applied only on the upper side, and the lower part is trimmed with a primer and will have an unattractive look.
Ruukki Monterrey Premium Pural Matt 0.5 mm RR 32 - for a private house
This is the best Monterey-type metal tile to create a house roof due to its manufacture with sheets up to 8 m long, which facilitates delivery and installation on a spacious roof, as well as a protective decorative coating thickness of 50 microns, which ensures the preservation of beautiful brown color for 50 years.
The Finnish manufacturer supplied such sheets with zinc in the amount of 275 g / m2, which gives rust resistance.
Pros:
- wave height of 24 mm gives the surface rigidity and aesthetic appearance;
- Available in lengths from 450 to 8000 mm;
- in the steps with a height of 15 mm there is a double groove, hermetically blocking the passage for water;
- out of a total width of 1,180 mm, 1,100 mm is useful, which gives reasonable material consumption at the joints;
- thickness of steel inside sheets of 0.5 mm contributes to increased strength and long service life of up to 50 years, which is included in the official guarantee;
- matte texture looks very attractive and looks like a natural tile;
- The weight of 4.5 kg does not exert much pressure on the foundation of the building, even with a large area of laying the roof;
- Pural coating withstands temperature drops from -60 to +100 degrees;
- can be laid on a slope of 12 degrees.
Minuses:
- cost from 660 rubles m2;
- conducts electricity, so careful insulation of all metal parts adjacent to the roof (antenna racks, chimneys, ventilation ducts) is required.
The best metal tiles Country
This type of profile belongs to the Mediterranean style and has high, but strongly stretched semicircular waves, which effectively withstand a large load of snow deposits, distributing it over a maximum area, and is better blown by the winds due to good streamlining.
Grand Line Kredo Pe 0,5 mm RAL 6019 - for canopy
This is the best metal tile with the type of Country profile for making various sheds in the yard, under which you can put the car or perform work in the warm season. Soft wave lines without pronounced angles provide a good wind load.
The color RAL 6019 has a delicate turquoise tint, well reflecting the sun's rays, so the roof will not be very hot. High dimensional accuracy of sheets allows you to create a roof with the maximum fit to the project without unexpected gaps or unnecessary trimming.
Pros:
- a small weight of 4.5 kg will not overload the canopy posts;
- polyester in the composition of the decorative coating ensures long color retention;
- steel coated with zinc in an amount of from 100 to 180 g / m2, which will protect against premature corrosion;
- warranty on materials up to 30 years;
- wide waves with a height of 28.5 mm provide good load distribution from snow;
- Available in lengths from 500 to 6500 mm, which is convenient for arranging roofs of various sizes;
- only 65 mm overlap is taken from the entire width, which gives some savings over a large area;
- steel thickness of 0.5 mm provides sheet strength and the ability to step on them during installation;
- material is allowed to cut, which helps to create a roof of various shapes;
- the decorative layer has a thickness of 25 microns;
- glossy surface looks aesthetically pleasing and presentable;
- high ductility facilitates installation.
Minuses:
- cost from 370 rubles per m2;
- due to the smooth and slippery shape of the surface, it is more difficult to walk on it during installation with a strong slope of the roof.
Grand Line Kredo Velur 0,5 mm Ral 5005 - for an arbor
This is the best metal tile to cover the gazebo, because of its large pattern and pleasant color that will stand out in the garden or yard.
High semicircular waves are well blown by the wind, increasing resistance to breakdown. The velor coating has polyester that promotes long-lasting color retention.
Pros:
- matte texture will not glare in the sun;
- sheet length up to 6.5 m is practical when arranging roofs of various designs;
- double-sided color looks beautiful both outside and under a canopy;
- a minimum cutting pitch of 10 mm is practical for size adjustment;
- thickness of steel 0.5 mm, coated with a layer of zinc in the amount of 265 g / m2, well tolerates mechanical stress and moisture;
- steps with a height of 20 mm have double protection against water droplets;
- 35 micron decorative coating thickness is UV resistant.
Minuses:
- cost from 535 rubles;
- so that the rain does not drum hard on the roof, additional sound insulation materials are needed.
The best metal tiles Adamant
This type of profile is distinguished by a pronounced ridge, the most appropriate form of natural tile. It looks especially beautiful on large sloping roofs.
Ruukki Adamante Pural Matt 0.5 mm RR 750 - for the cottage
This is the best metal tile from the Adamanty series for arranging the roof of a cottage due to its increased rigidity due to the wave height of 30 mm, which can withstand loads from both snow and wind.
Protective galvanizing is applied in the amount of 275 g / m2, which contributes to a guaranteed service life of up to 50 years.
Pros:
- the thickness of the decorative layer of 50 microns gives long-term preservation of brown tint;
- only 50 mm of overlap is taken from the total width;
- high waves up to 30 mm;
- steel thickness 0.5 mm;
- possibility of trimming to the required dimensions in increments of up to 10 mm;
- lightweight 4.7 kg does not overload the foundation;
- allowed to lay on a slope of 14 degrees.
Minuses:
- cost from 800 rubles per m2;
- transmits electric current.
It will be interesting to friends too
