The tile is one of the most ancient materials which equipped roofs. The advantages of this type of roofing is its non-inflammability and resistance to wind. It creates a noise barrier, as well as additional insulation. The roof of this material can last up to 100 years. All builders will be interested to know the rating of the best tile by its type, which will help determine proven popular products for laying roofing in homes, cottages, hotels, recreation center and other buildings.
The best ceramic tiles
This type is natural and is obtained from molded clay with its subsequent annealing, which gives the material strength.
Available in red, brown and orange shades, depending on the type of clay. It is a classic in the construction roofing world and can last up to 100 years.
Koramic Alegra 9 Brown Engobe - with a small comb
This ceramic tile is the best for laying the roof when the goal is to create a neat look with a classic design. The small tile has a groove for a stack of water and a lock that provides reliable coupling of parts.
The small comb promotes wind resistance and looks aesthetically pleasing. The Polish manufacturer supplied the tiles with a smooth surface giving an accelerated stack of water.
Pros:
- Available in sizes 31x47.7 mm, which allows a large batch to be transported compactly;
- useful width and length of 26.9 x 40.6 mm;
- for durable fixing need crate with 39x41 mm pitch;
- 210 pieces can be brought in the pallet at once;
- only 8.9 pieces are needed to close one square meter;
- it is allowed to lay with a roof slope of 18 degrees;
- high strength to mechanical shocks (hail, stones);
- completely not combustible material;
- low profile with a neat look.
Minuses:
- the mass of one tile is 3.9 kg;
- from 140 rubles per item.
Roben Piemont Autumn Leaf Engob - with unusually beautiful annealing
This is the best natural tile for arranging the roof with an unusual design, because it has uneven firing, creating on its surface areas from orange to black.
On a large area, this forms the effect of a layer of autumn leaves and looks very elegant. A construction product is produced with the dimensions of 47.2х29 mm.
Pros:
- special coating Engobe, with the application of a liquid layer on the finished tile before it is placed in the oven, which gives an increased surface smoothness;
- it is allowed to lay on roofs with a slope of 22 degrees;
- flat profile contributes to accelerated precipitation;
- 240 pieces fit in one pallet, which is convenient for delivering a large batch to the construction site;
- material transfers frosts and strong heat, without transferring these temperatures to under-roofing surfaces;
- does not burn.
Minuses:
- the cost of one tile is from 160 rubles;
- the weight of an element is 4 kg, which forms a mass of a square meter of 44 kg and requires a good batten and a solid foundation;
- for laying one square meter you need 11 pcs.
The best cement-sand tiles
The combination of cement and sand made it possible to reduce the cost of tile production and preserve the traditional look of tiles with their strength characteristics.
The material does not burn and effectively reflects ultraviolet rays, withstands hail and strong wind blows, but costs four times less than the ceramic counterpart. Also applies to natural species.
Sea Wave gray economy - the cheapest option
This is the best concrete tile for laying the roof of the cottage and other structures due to its economical cost of 23 rubles per item.
The tile is produced in the form of two waves, one of which is whole, and the second forms the overlap of the previous one. Two grooves were made at the docking site to prevent the passage of moisture.The two-wave structure maintains the mechanical load level with ceramic counterparts.
Pros:
- price from 23 rubles per piece;
- for laying on 1 m2 only 9.5 units are required;
- large dimensions 42x33 mm give increased productivity when laying;
- 240 pieces are delivered immediately to the pallet;
- as a part cement of the highest M600 brand;
- bending withstands a load of 2.6 kN;
- a wide crate of 32x37 mm is allowed.
Minuses:
- one piece weight 4.3 kg needs durable trusses;
- 1 m2 has a weight of 40.8 kg;
- no additional coverage;
- it is allowed to lay only with a slope of 35 degrees to ensure the free flow of snow.
BRAAS Frankfurt Red - for the attic
This is the best concrete tile to cover a vast roof, under which it is planned to operate the room as a mansard. The cost of one piece of 55 rubles will allow you to freely cover a large area and save some of the funds compared to other types of tiles.
The roofing tile has one full-fledged wave and two halves serving as a lower and upper layer for a bunch of a row. Available tile dimensions 42x33 mm.
Pros:
- beautiful red color, similar to ceramic materials;
- cost from 55 rubles;
- it is allowed to lay on the roof with a slope of 22 degrees;
- distinct grooves for sealing the joint;
- does not sustain combustion;
- keeps cool in the attic;
- delivered in pallets immediately 240 pieces;
- precision casting with a pronounced relief without spreading.
Minuses:
- weight 4.5 kg of each unit;
- per m2 will need at least 10 pieces;
- no additional coverage;
- needs a small crate 31x34 mm.
Top Composite Tiles
This type of roof finish is one of the most expensive due to the complex structure of the material, providing high strength and beautiful appearance.
The basis of the tile is a steel sheet with galvanized and silicon. On top of it is sprinkled with stone powder, giving it a rough insulation surface resistant to fading and mechanical stress.
LUXARD Roman absinthe, 1330х430 mm - with an emerald hue
This is the best composite tile for arranging the roof of a hotel or restaurant due to its expensive finishing with small stones sprinkling with dark green color. The rich look is supplemented with strength characteristics of the steel sheet which is completely protected from moisture.
The tile is produced by large panels with wide waves, facilitating the descent of snow and resisting breakdown in the wind.
Pros:
- dimensions 1330х430 mm provide accelerated installation;
- a thick layer of slabs reliably isolates sounds and cold;
- there is no loud noise when it rains;
- the material does not conduct current;
- wide waves contribute to the distribution of static loads;
- iron sheet inside has double moisture protection;
- small weight of 3.5 kg compared with the classic types of tiles;
- steel thickness 0.5 mm;
- does not sustain combustion;
- Alyumotsink firmly on the metal;
- granulate has a loss of not more than 60 g over the entire area;
- the elasticity of the panels simplifies their delivery to the top and installation;
- service life up to 50 years.
Minuses:
- price from 545 rubles per item;
- needs a crate in 37 cm increments;
- over time, dressing may be lost in areas with increased load.
METROTILE Metrobond brown, 1350х415 mm - with original scales
This is the best tile to create the roof of cottages and office buildings that want to stand out with the original design. The Belgian manufacturer produces its large panels with semicircular lines of joints resembling scales.
Sharp triangles between each semicircle at the junction and the groove in the middle of the wave crest give refinement to the roofing material. Such a complex structure immediately attracts attention, and the brown color of the surface will suit most of the finishing materials on the walls.
Pros:
- sheet sizes 1305х415 mm provide high performance during operation;
- to close 1 m2 only 2.17 sheets are required;
- a mass of 3 kg of a huge slab will not overload the crate and foundation even with a large roof;
- wave height of 37 mm gives increased resistance to wind and sleet deposits;
- the inner layer contains steel with a thickness of 0.5 mm;
- operation at temperatures from -50 to +100 degrees;
- stone coating retains its dark brown color for a long time.
Minuses:
- cost from 940 rubles per sheet;
- at the expense of a rough surface, thawed snow lasts longer on the roof and does not fall.
The best shingles
Such materials are made of rigid bases such as fiberglass with the application of bitumen on the surface, which contributes to high waterproofing properties.
The connection provides reliable sealing of the joints and protection against drafts. The service life of soft tiles up to 50 years.
SHINGLAS Country Dragon's tooth, Arizona - for vertical roofing
It is the best bituminous tile for arranging the roof with a great entry on the walls, because it has a small weight and flexibility for this type of placement. Soft tile strips of 100x33.5 mm are produced, which allows for accelerated installation.
The shape of the surface is equipped with trapezoids with protruding and recessed segments, which gives a natural look under the stone and masks the bitumen base.
Pros:
- the cost of 390 rubles per m2 makes it very affordable;
- several layers provide high heat and sound insulation;
- loss of dressing is not more than 1.2 g;
- brown color and relief imitate natural stone well;
- maintains thermal impact to +110 degrees;
- able to serve up to 50 years;
- delivered in pallets of 36 sheets;
- two layers;
- easy to cut with a knife when laying;
- high flexibility;
- maintains mechanical loads in the form of hail shocks;
- bitumen protects from getting wet.
Minuses:
- possible falling off of external dressing in places of frequent circulation on the roof.
It will be interesting to friends too
