Stekloizol made of a flexible base, in the role of which serves fiberglass, polyester materials with a frame or fiberglass. From above, they are covered with a bitumen binder to impart increased strength and elasticity, as well as full waterproofing. This hydro insulator serves twice as long as normal roofing felt, which will save time and money on subsequent repairs. It is delivered in rolls and stacked on a layer of mastic or a heated primer. From the ranking of the best stekloizola, you can find out the popular types of goods for waterproofing a pool, basement, attic, roof, room, cellar and other building structures.
The best stekloizolya HPP
This is one of the most affordable types of glass isola, which is based on fiberglass and two films to close the sides.
The bituminous component provides protection against the admission of water and a small noise isolation. The material varies in thickness and is used for lining under roofing or floor materials.
TechnoNIKOL Stekloizol HPP-2.5 - under the tile
This is the best stekloizol as a lining material under the tile, which tend to pass a little moisture at the joints. The film surface is completely waterproof, which contributes to a dry attic or attic. Available in rolls in black 10 meters long.
The thickness of the film 2.5 mm has a small weight of 2.5 kg per m2, which is optimal for insulating the roof so burdened with tiles. The basis is designed for the operation of the roof, on which no walking is carried out, otherwise it will deteriorate from this.
Pros:
- convenient roll length for bulk work;
- it is easily cut with a knife according to specified dimensions;
- breaking load is 294 N;
- resistant to temperatures of 80 degrees;
- supplied in packs of 42 rolls;
- slightly makes the roof heavier;
- the film protects not only from moisture, but also from sticking together;
- well bends under any form of a roof without excess cuts;
- it is not subject to rotting;
- noise suppression;
- cost from 44 rubles per m2.
Minuses:
- a slope of at least 10 degrees is required;
- fiberglass has a thin section and may be damaged by inaccurate installation;
- cannot be laid on unevenness and a solid foundation is required.
Stekloizol P-2,0 with / x (HSP) - for interfloor overlappings
This is the best stekloizol for laying between floors in a brick or panel house, which will provide waterproofing levels, complement protection from sounds and create a thermal barrier between the heated and unheated floors of the house.
The cost of 35 rubles per m2 does not significantly affect the construction budget. Stekloizol is produced in rolls with a length of 10 m and a layer thickness of 2.0 mm. The surface is covered with a smooth film that provides easy laying and adhesion with the surface.
Pros:
- high flexibility on the bar with a radius of 25 m;
- cost from 35 rubles per meter;
- when exposed to a temperature of +80 degrees for two hours does not receive visible or internal deformations of the structure;
- fiberglass will last up to 20 years between floors and being protected by other materials;
- simple laying on the primer;
- full waterproof when staying for three days directly under a layer of water;
- lightweight of 2.1 kg per square meter does not create loads on the foundation and is easy to deliver to the upper floors of a house under construction;
- It has a low thermal conductivity, so it will not transfer heat to unheated floors in a large house.
Minuses:
- at a temperature of -15 degrees binder can crack from flexion;
- with a longitudinal rupture force of 30 kgf / 50 mm, it is able to tear, therefore, requires careful handling during installation.
The best stekloizolya CCI
This material is a bit more expensive than the previous one, because it has not a canvas inside, but a full-fledged fiberglass, which gives increased strength and allows the substrate to be used on the roofs used, which will be periodically walked on.
TechnoNIKOL Stekloizol TPP-2.5 - for the garage
This is the best stekloizol for arranging a flat small roof of a garage or another building, since it is allowed to lay it without a slope on metal and concrete surfaces. If you regularly walk on the roof (the fruit is dried on it, the antenna is serviced), then the material will withstand it and preserve its integrity.
The film base has a smooth surface. A roll length of 10 m and a width of 1 m are convenient when calculating the amount of glass insulation for one object.
Pros:
- high breaking load 400/500 N;
- light weight of 2.5 kg per square meter will not create overloads on the roof and foundation;
- for large objects, a pallet is convenient with 30 rolls at once;
- maintains temperature up to +80 degrees and does not lose its properties;
- tissue structure provides increased strength during installation and protects against accidental gusts;
- maintains frosts to-40 in the laid state;
- installation is allowed at -15 degrees;
- full waterproof even with large pools of water on top;
- easy laying on mastic;
- 2.5 mm thickness gives sound and heat insulation;
- it is allowed to build up even on vertical surfaces;
- easy to cut;
- bends well at any angle of the roof;
- bitumen-polymer binder gives elasticity and resists the formation of bacteria and fungus;
- Easily stored without pasting layers due to film coating.
Minuses:
- cost from 58 rubles per m2;
- You can not buy less than 10 m for small works.
Stekloizol CCI 3.0 - for the cellar or basement
This is the best stekloizol for waterproofing a basement or cellar, which is constantly seeking to seep ground or melt water. The thickness of the layer is 3 mm, which can withstand considerable loads when walking on top or even from falling solid objects.
The fabric layer inside provides durability when laying. The film surface on both sides will not allow water to leak into the room. It is possible to lay mastic-reinforced material with a high entry into the concrete wall in order to eliminate the leakage between the seams.
Pros:
- weight of 25 kg in a roll does not represent difficulties in transportation and work with material;
- suitable for shallow, flat and vertical surfaces;
- high flexibility of the base will not allow cracking;
- maintains heating to 80 degrees and frosts;
- in direct contact with water, it is able to hold it for 3 days;
- the film surface simply connects to the concrete walls and the base;
- installation is allowed at a temperature not lower than -15 degrees;
- no crumbling layers in the aftermath;
- with an effort of 60 kgf / 50 mm, it cannot be broken from longitudinal stretching;
- can be operated both indoors and outdoors;
- for bulk objects it is convenient to complete pallets of 30 rolls each.
Minuses:
- cost from 60 rubles m2;
- for finishing the floor in a damp basement, a preliminary thick layer of mastic is required.
The best stekloizolyas HKP and TCH
These are similar materials (canvas or fabric), but with reinforced reinforcement inside and large sprinkling outside. They are allowed to be used in the clear without the subsequent laying of roofing panels.
TechnoNIKOL Stekloizol TKP-4.0 slate gray - for repair of the high-rise roof
This is the best stekloizol for repair or overlap of the roof of a multi-storey building on the concrete base of the plates, because the material has high strength despite the walking of installers and various service technicians.
Coarsely granulated powder on top adds protection from mechanical damage, and a 4 mm layer thickness protects against freezing and sounds. Material is produced in rolls of 9 and 10 meters long and 1 m wide.
Pros:
- high flexibility;
- glued on all types of surfaces;
- allowed to walk over the floor;
- one of the highest resistances to longitudinal stretching 80 kgf / 50 mm;
- absolute water tightness;
- maintains heating to 80 degrees without loss of properties.
Minuses:
- cost from 830 rubles per roll;
- may be sprinkled upon careless transport;
- The whole weight of a roll of 40 kg is more difficult on delivery to the roof.
It will be interesting to friends too
