mylogo

We get acquainted with the best car jacks: from professional - for tire fittings and service stations - to unpretentious but reliable models in the trunk.

 

 

Car jack

Which car jack to choose

All motorhomes are classified by type of drive and design of the actuator. The second parameter is more important:

1. Screw jacks can have a manual or electric drive - such models are recommended for owners of passenger cars.

2. Rack - require a rigid base and secure fit. Depending on the features of a particular device, they are able to lift cars to a considerable height.

3. Hydraulically driven trailers are more often used at tire fitting stations and in car services.

4. Bottle - can have both mechanical and hydraulic one-or two-rod version.

Such models can only be transported in an upright position, which limits their transportation. But hydraulics is ideal for lifting heavy vehicles and is actively used in car services.

The principle of operation of inflatable jacks of the “pillow” type is interesting. They are able to lift cars with minimal ground clearance and are driven by the flow of exhaust gases.

When choosing a particular model of the jack, you should pay attention to the conditions of its operation.

Remember that each device has a capacity limit that cannot be exceeded. Ground clearance (vehicle ground clearance) will force you to carefully consider the design of the auto-ram.

Well, the required lifting height matters - it is determined by the distance between the support and the pickup in the upper position. To change the wheel on the road, you do not need much - just take the car off the ground. But to repair the car already really high jacks will be needed, otherwise you will not crawl.

The best screw car jacks

A screw acts as an actuator in such jacks, which, when rotated, tightens or unclamps the rhombic system of levers. These lifts are characterized by simplicity of design, versatility, low cost and at the same time, a small working stroke.

Belavtokomplekt - a reliable jack with a lifting capacity of 2 tons

Belavtokomplekt - a reliable jack with a lifting capacity of 2 tons
4.8
★★★★★
editorial rating
92%
Buyers recommend this product

High-quality light rhombic auto-dump is a product of a holding company whose production facilities are dispersed throughout the CIS countries and in China.

The product is distinguished by high-quality assembly, lack of backlash and distortions. The pad has a rubber pad.

The handle is comfortable, two-section and has a length of 500 mm. Due to its light weight (2.2 kg) and rather compact dimensions, it is convenient to carry the device with you in the trunk.

Advantages:

  • High-quality assembly;
  • Reliable base;
  • Low cost (1000 rubles).

Disadvantages:

  • Lack of lubrication on the screw;
  • There is no case for transportation.

Belavtokomplekt - the best purchase for the owner of the car with the corresponding weight.

Airline AJ-R-02 - a budget solution

Airline AJ-R-02 - a budget solution
4.7
★★★★★
editorial rating
89%
Buyers recommend this product

One of the most popular and accessible auto-tomber jacks of the rhombic type. It is noteworthy that it can be used for lifting cars with extremely low ground clearance - from 95 mm.

In this case, the maximum height is enough even for an SUV. The quality of the device as a whole is decent, especially considering the cost of a thousand rubles.

Advantages:

  • Resilience;
  • Excellent quality of performance and components;
  • Small height when folded;
  • Bag for transportation included.

Disadvantages:

  • Rubber lining is poorly fixed to the support site.

Airline AJ-R-02 will find its application with the owner of a passenger car with low ground clearance.

Autoprofi DV-15R - maximum stability under load

Autoprofi DV-15R - maximum stability under load
4.6
★★★★★
editorial rating
85%
Buyers recommend this product

This screw jack is recognized as the most successful in the budget segment. Despite some complaints about ergonomics and quality of coloring, the model is very popular among domestic owners of passenger cars.

The secret lies in the good stability of the elevator in the unfolded state and a record low cost, not exceeding 900 rubles.

Advantages:

  • Large thread pitch;
  • Soft protective rubber;
  • Comfortable long handle.

Disadvantages:

  • Quick wear of the screw;
  • The handle is flimsy, although it doesn't require much effort.

Autoprofi will suit owners of cars with ground clearance of 130-150 mm and weighing up to one and a half tons. Even fragile young ladies will cope with such a mechanism.

Belavtokomplekt

Airline AJ-R-02

Autoprofi DV-15R

Height when folded (mm)

100

95

100

Max. Lifting height (mm)

380

400

390

Load capacity (kg)

2000

2000

1500

Choosing the best screw jack car!

The best jacks with electric

Electric models are classic screw jacks, but here you do not need to turn the handle yourself, pushing the sections apart. Power is supplied from the vehicle electrical system or directly from the battery.

Kraft CT 850000 - rhombic autoslot with remote control

Kraft CT 850000 - rhombic autoslot with remote control
4.8
★★★★★
editorial rating
88%
Buyers recommend this product

An easy-to-use version of the classic screw jack is powered from the cigarette lighter via a 4-meter cable or directly from the battery terminals through an adapter with clips. For unforeseen situations, the manufacturer has provided the possibility of extending manually.

Under normal conditions, it is supposed to control the jack operation from the remote control, which is additionally equipped with a flashlight.

Burning the engine here is unrealistic - in the extreme positions on the jack, microswitches are activated, which stop the movement of the drive. The cost of this model is 5200 rubles.

Advantages:

  • Easy to use;
  • The presence of a remote control;
  • There is a case for transportation;
  • Motor protection.

Disadvantages:

  • Unreliable plastic gears in the design of the gearbox.
  • Slow rise.

Kraft CT is a successful model that is best suited for car enthusiasts and elderly owners of passenger cars.

Varta V-CJ2.10 - with wired remote

Varta V-CJ2.10 - with wired remote
4.7
★★★★★
editorial rating
85%
Buyers recommend this product

Quite a popular model does not linger on the shelves of domestic auto shops. The device is a screw jack, which is driven by a compact electric drive and is controlled by a wired remote controller.

Of particular interest is the support platform, which is made in the form of a bolt with a groove. This is really convenient, although a rubber pad on the head would not be superfluous.

For connection to the battery manufacturer has provided an adapter with clips. In the premium configuration with a jack in the set is also a powerful impact wrench with a torque of 380 Nm, as well as fuses.

All tools and accessories are delivered in a plastic case. The cost of this kit - 10 thousand.

Advantages:

  • High-quality assembly;
  • Rich equipment;
  • Illuminated remote control.

Disadvantages:

  • The complexity of the installation - at the slightest distortion of the jack turns out.

In general, the Varta V-CJ2.10 is a solid model that fits most cars and crossovers. The main thing is to work on it.

Turbo Jack GB-A20 - lift with low pickup

Turbo Jack GB-A20 - lift with low pickup
4.6
★★★★★
editorial rating
82%
Buyers recommend this product

At first glance, this jack is similar to most screw devices with a drive. But he has his own peculiarity - a small height in the folded state, which allows to bring the lift to almost any car.

Another difference Turbo Jack GB - large support platform (50 mm). It is made of plastic, but eliminates the appearance of scratches on the paintwork.

The scope of supply includes: the jack itself with electric drive and wired remote control, three fuses, two cables (for power supply from the cigarette lighter and with clips to the battery terminals), a plastic handle and a case. For the entire set will have to pay 6 thousand.

Advantages:

  • High lifting speed;
  • Quiet operation;
  • Full set;
  • Low cost for such a set.

Disadvantages:

  • Gearbox with plastic gears.

The GB-A20 is a good jack for cars with low ground clearance. However, it is quite versatile and suitable for most cars.

Kraft CT 850000

Varta V-CJ2.10

Turbo Jack GB-A20

Height when folded (mm)

120

180

110

Max. Lifting height (mm)

350

400

3500

Load capacity (max)

2000

2000

3000

Operating current (A)

20

15

15

What electric jack would you buy?

The best rolling automobile jacks

Trolley lifts are great for use in the garage. They are stable, compact, but differ in impressive carrying capacity and do not require much effort.

Wiederkraft WDK-81885 - low profile jack with large carrying capacity

Wiederkraft WDK-81885 - low profile jack with large carrying capacity
4.9
★★★★★
editorial rating
97%
Buyers recommend this product

The compact model of the German production is equipped with two working cylinders, which significantly increases the reliability of holding the working part. A large plastic bearing pad does not leave scratches on the paintwork of the car.

The main feature of this jack is an impressive lift height, and this greatly expands the range of serviced cars. The only weak link in the chain of all advantages of Wiederkraft is the large weight of the device, which is up to 34 kg. Price lift 9 thousand rubles.

Advantages:

  • Reliable design;
  • High-quality execution;
  • Low pickup;
  • Two working cylinder.

Disadvantages:

  • Impressive weight.

Wiederkraft WDK will suit both amateurs and professionals. But it is convenient to use it only in the conditions of a garage - in the trunk you will not ride it.

Kraft CT 820002 - a compact and inexpensive model

Kraft CT 820002 - a compact and inexpensive model
4.8
★★★★★
editorial rating
94%
Buyers recommend this product

The model from China from a brand with German roots turned out to be reliable and at the same time affordable for domestic motorists.

The jack can be used for both passenger cars and SUVs, if they fit into the manufacturer-defined parameters of the load. The lift comes in a plastic case, and it costs only 3,200 rubles.

Advantages:

  • Reliable and hardy;
  • Qualitatively assembled;
  • Affordable price with excellent technical characteristics.

Disadvantages:

  • Low lift height.

KT 820002 perfectly will be suitable for garage, giving or small auto repair shop.

Matrix Master 51040 - semi-professional jack

Matrix Master 51040 - semi-professional jack
4.7
★★★★★
editorial rating
87%
Buyers recommend this product

This jack is equipped with only one working cylinder. But despite this apparent reduction in the cost of construction, it is practically not inferior to the two-cylinder counterparts in terms of carrying capacity and reliability of retention.

Moreover, the Matrix machine raises to a fairly decent height - enough for the master to easily get to the right place under the bottom and work there. The price of this model is 5000 rubles.

Advantages:

  • Reliability;
  • Good payload;
  • High lift height;
  • Relatively low price.

Disadvantages:

  • Weight 21 kg.

Matrix Master 51040 is a good choice for a small service station or private tire service.

WIEDERKRAFT WDK-81885

KRAFT CT 820002

MATRIX MASTER 51040

Pickup height (mm)

85

135

150

Lifting height (mm)

455

385

530

Load capacity (kg)

3000

2500

3000

Vote for the best sliding car jack!

Top Bottle Lifts

Bottle-type jacks are characterized by good load capacity, high stability, are relatively inexpensive, but require periodic maintenance and replacement of seals.

Kraftool 43463-6 - quality jack for trucks up to 6 tons and special vehicles

Kraftool 43463-6 - quality jack for trucks up to 6 tons and special vehicles
4.9
★★★★★
editorial rating
97%
Buyers recommend this product

Kraftool’s robust lift is always popular with owners of SUVs, family cars and small trucks. The cylinder and piston group here are made of high-quality materials, which ensures reliable retention even at peak loads.

Enough with him and other virtues. The model has earned the special love of our compatriots for its small weight of 5 kg, relatively compact dimensions and quite affordable price (2,200 rubles).

Advantages:

  • Excellent quality components;
  • High reliability;
  • Corrosion resistant coating.

Disadvantages:

  • Lack of shipping case included.

Kraftool 43463-6 is perfect for owners of vehicles with high ground clearance, and its capacity with enough reserve to lift any truck with a gross weight of up to 6 tons.

Bison Professional 43060-12 - a powerful and inexpensive bottle-lift

Bison Professional 43060-12 - a powerful and inexpensive bottle-lift
4.6
★★★★★
editorial rating
87%
Buyers recommend this product

The heavy-duty hydraulic jack of domestic production differs in rather big pickup height, because of which it is simply impossible to use it for lifting passenger cars.

The complexity of the tool also lies in the long pumping to raise the support platform to the peak height. But to simplify the task, the manufacturer has provided an extension arm, the opposite end of which is used for pressure relief.

It is difficult to call the listed nuances as disadvantages - rather, these are design features dictated by the increased tool carrying capacity. Well, the cost of a jack at 1700-1800 rubles finally reconciles with such trifles.

Advantages:

  • Large load capacity;
  • Reliable design;
  • Compact storage;
  • Affordable cost.

Disadvantages:

  • Outdated pressure relief design;
  • Paint from the body peels off and peels off.

Bison Professional is able to lift trucks weighing up to 12 tons. It can also be used as a powerful press mechanism.

Kraftool 43463-6

Bison 43060-12

Pickup height (mm)

170

230

Lifting height (mm)

420

465

Load capacity (kg)

6000

12000

Which bottle lift do you like more?

The best rack tappers

Rack models are characterized by a large lifting height, have a higher than average payload, but are not cheap.

Skyway S01803005 - Multifunctional Model

Skyway S01803005 - Multifunctional Model
4.9
★★★★★
editorial rating
97%
Buyers recommend this product

A simple and reliable autocart is able to quickly lift a load to a rather large height. The design of the stepping mechanism and the presence of the latch ensures a smooth running of the platform, as well as reliable retention and accurate descent under load.

The lift has a hook loop on the carrier rail, which allows you to use the tool in the horizontal plane, for example, as a hand winch or clamp. This model is worth about 5.5 thousand rubles.

Advantages:

  • Made of durable alloyed tool steel;
  • High lift height with low pickup;
  • Possibility of horizontal placement.

Disadvantages:

  • Weight 14 kg.

Skyway S01803005 is a truly universal jack that garage masters will be able to use not only for its intended purpose.

Wiederkraft WDK-80603 - with a high lifting height

Wiederkraft WDK-80603 - with a high lifting height
4.8
★★★★★
editorial rating
91%
Buyers recommend this product

Structurally, this model is practically no different from analogues. However, its height is as much as 1.5 meters.

Reliability of the tool is beyond doubt: it uses high-quality steel, a robust lifting mechanism, and the body is protected by powder coating that prevents corrosion.

The only weak point is not a very convenient retainer, but this does not affect the work of the lift itself - only on the convenience of its use. The cost of this model in different stores is 5-6 thousand rubles.

Advantages:

  • Reliable design and materials;
  • High lift height;
  • Does not need maintenance.

Disadvantages:

  • Inconvenient design lock.

Given the very good performance, this model will be a great help for the mechanic. However, lovers delve into the car, can take this jack for your garage - if the ceiling height allows.

SKYWAY S01803005

Wiederkraft WDK-80603

Pickup height (mm)

130

130

Lifting height (mm)

1350

1550

Load capacity (kg)

3500

3000

What rack mount would you recommend?

It will be interesting to friends too

 

 

 


mylogo

Selection

Ratings