Sooner or later, every motorist has a question about replacing the drive. It does not matter whether it is a necessary measure or simply the desire to improve your car, the choice should be made the very best. Indeed, the safety of the machine operation depends on the disks. Most drivers prefer stamped discs, popularly called “stamps,” and this is a very wise decision. These drives are strong enough, functional, easy to install and are not so expensive. Due to their popularity, our site decided to create a rating of the best manufacturers of stamped discs so that every newcomer in this path could make a worthy choice. The material presented below is completely based on customer feedback, so you can be sure of its objectivity.
The best manufacturers of stamped discs
KFZ
One of the largest companies producing pressed discs in Europe. Included in a large holding, whose production is based in countries such as Austria, Switzerland, Germany, the Czech Republic, Spain and Brazil.
The manufacturer represents steel stamping discs on the market of its services for many years. A large number of world-famous automotive companies are ordering stamped discs for basic equipment of their cars from KFZ. Such brands as Toyota, VW, Alfa Romeo are regular partners of the company. Well-established production in 35 factories located around the world allows the brand to have a huge audience.
Innovative production technologies and the use of high quality metal help to achieve a high level of strength of the finished product. Also stamped discs from KFZ have excellent design and reasonable prices.
Fully certified products are more than 500 standard sizes. Selection of disks can be carried out completely on any machine. In Russia, the most common "stamps" are R13-R16. Every year, a high level of sales and excellent product reviews are guaranteed to add the manufacturer to the “white list”.
Advantages:
- highest reliability;
- light weight, on average, 15-25% lower than that of other manufacturers;
- thanks to the 3-layer coating technology, high resistance to corrosive processes is available;
- attractive design;
- wide range and variety of model range;
- acceptable prices.
Disadvantages:
- Many buyers note that the ends of the surfaces are highly susceptible to the oxidative process.
Dotz
Pedantic Germans were able to organize the production of some of the best forged discs in the world, manufactured under the brand DOTZ. Initially, the company produced products under three fundamentally different brands (besides DOTZ, were AEZ and ENZO), but later merged them into a single Alcar group, and now, mainly, produces goods from the first.
The most common products of the company in Europe, where most of the manufacturers are located. The discs of their production belong to the class of elite and semi-elite, therefore the price for them is not small. Unlike the previous brand, this one delivers disks to auto concerns for equipping them with far from basic equipment.
Young specialists, the so-called new school, work in the head office of Germany to create “stamps”. This gives tangible results, now, in addition to excellent quality, all discs have an excellent design. Mostly the product is aimed at lovers of fast racing and tuners. But having bought them even for everyday driving, your children will most likely think about acquiring new ones (this is not an exaggeration).
A rather wide assortment and variety of products provide the manufacturer with millions of customers annually.
Advantages:
- excellent quality and reliability;
- high level of corrosion protection;
- guaranteed operational safety;
- ideal surface treatment of the disk, no chips, scratches, cracks, etc .;
- a large number of types of design;
- wide range of.
Disadvantages:
- high price;
- A large number of fakes on the market.
Mefro
Another manufacturer, which began its activities in Germany. The first large-scale appearance of stamped discs for cars on the market was in 1997 in Russia. The company immediately managed to establish itself as an excellent brand. To date, the main production plants are located in Germany, France, Turkey, Argentina, Russia, China, South Korea.
Discs from this brand are sold everywhere because of its availability. Just think, about 25 million different machines are equipped with this company's products every year, with a financial turnover of more than 400 million euros. Such figures say a lot about the prestige of the organization.
Excellent corrosion protection, sturdy steel fabrication, durability and low prices attract more and more new customers to the manufacturer. Also worth noting is the versatility and diversity of production. In the Mefro product range, you can find wheels on tractors, trucks, trailers, motorcycles and cars.
Benefits:
- excellent quality and durability of products;
- good corrosion resistant treatment;
- no safety concerns were identified;
- wide and diverse range;
- low prices.
Disadvantages:
- despite the cheapness of the disks from Mefro, the market is just full of low-quality fakes.
TZSK
The most famous Russian manufacturer of stamped discs. Togliatti Steel Wheels Plant (TZSK) rightfully occupies leading positions in sales in the Russian car market. At the moment, the company is not seeking to enter the international market, since it has been successfully working with clients in Russia since 2004.
The company cooperates and delivers disks to such world famous manufacturers as Ford, Renault, VW, AvtoVAZ and Izh-Avto. Production takes place at one plant with a total area of about 12,000 m2, to which all the necessary resources are suitable for their own railway routes and communications, which allows to produce a product that fully meets all European standards.
About 1.5 million wheels come out of the TZSK conveyor annually, which is one of the best results for the market of one country in the world. The size of the disks varies from 13 to 16 inch. The range allows you to choose the "stamping" to the 15 most common car brands in the CIS. Low prices and excellent quality allowed the manufacturer to rally around a lot of customers.
Advantages:
- high workmanship, thanks to doing all the work on the production in one place;
- these discs are the easiest in our rating;
- safety in operation;
- low cost;
- wide range, and selection to a certain brand of car.
Disadvantages:
- low quality paint in a couple of seasons will begin to peel off;
- a lot of chinese fakes.
Trebl
Asian company producing steel stamping discs. More than 70-80% of products are exported to all parts of the world: North America, Australia, Asia, Europe. In the Russian market manufacturer since 2008, after the opening of the plant near St. Petersburg. Also stamped Trebl wheels are supplied for basic configurations in large automakers (Ford, GW, VW).
The company values its reputation, therefore, in the production of all, without exception, the disks are tested for quality (beating, imbalance, etc.). The company is ready to offer high quality discs at reasonable prices. The diversity and breadth of the range will allow you to select the necessary products for every customer, which is presented, both for cars and trucks, passenger transport.
All products of the manufacturer have been fully certified under the European standard ISO 16949 and in Gosstandart of the Russian Federation The main advantage of the company, they consider the wide variability of choice for different brands of cars, sometimes it is only possible for her to find the option of replacing the original drive with the original drive, as other factories do not produce them.
Advantages:
- good quality and durability;
- warranty absence of beats, imbalance and other operational defects;
- big choice;
- acceptable prices.
Disadvantages:
- weak corrosion protection.
Stamped wheels which manufacturer to choose
1. If you just need reliable wheels for everyday use of the car, then you should choose among Mefro, TZSK and Trebl. "Stamping" of these manufacturers have approximately the same durability resource and budget prices. In the case of non-aggressive use of them, they will easily serve you within 5-10 years. Yes, due to the low cost, they have some drawbacks, but they are mostly of a cosmetic nature and can be easily removed by hand, literally for a penny.
2. But it should be understood that if you are committed to aggressive driving or even racing, stamped discs must be of the best quality. In our ranking, these include KFZ and Dotz. The disks from these enterprises have proven to be one of the most durable, reliable and beautifully designed. But for this quality you will have to pay a considerable amount, of course, everything depends on your capabilities. You can say one thing, these discs are worth it and will truly serve you for more than a dozen years.
It will be interesting to friends too
