Device for heating the air to a certain temperature and supply to the heating zone. It consists of a housing, a handle, a heating element and a blower (fan). The gas mixture comes out of the nozzle, complete with nozzles of different shapes. The building hair dryer is used to remove old paint coatings, melts and welds plastic parts, heats various materials to deform and give a certain shape. Divided into household and professional series. Selection parameters: temperature range, performance, duration of operation.
The best household building hair dryers
Hand tools for heating the air-gas mass and feed to the workpiece or part. Designed to increase the surface temperature with the aim of connecting homogeneous materials, the destruction of the internal structure to remove the old coating.
Helps to melt thermodeformable tubes when joining electrical wires. Characteristics at the choice: power, temperature, air consumption, duration of work.
PATRIOT HG 201 - cheap
Manual construction hair dryer household series. It has two modes of operation, at a temperature of 300 or 500 ° C. Designed for heating fusible materials with subsequent deformation to give new forms.
Able to melt and weld plastic blanks, performs the function of glue thermogun. Destroys the internal structure of sealants and coatings, followed by removal of old coatings. Provided for operation in a stationary position.
Pros:
- Compact, lightweight, powerful, warm.
- Price, simple and intuitive tool.
- Bracket for hanging and storage.
Minuses:
- Plastic tool has an unpleasant smell, leaving a week.
ZUBR FT-1600 - equipped with nozzles
Construction dryer with two-stage operation. It is completed with four nozzles for localization of a zone of heating. A scraper is provided for removing softened sealant or paintwork.
Equipped with overheating protection system. The total work life of the product has been expanded. The design of the input channels retains mineral inclusions, ensuring clean air. Powered by a single-phase 220 volt power supply.
Pros:
- Fully performs the declared functions. Extended warranty of five years.
- Cost, easy, convenient. Heats frozen pipes in winter.
- Does not overheat, successfully copes with the removal of old perennial paint.
Minuses:
- Negative properties of consumers are not marked.
VORTEX TP-2000 (72/2/1) - three-speed flow
The thermogun with the powerful engine and a heating element. There are three heat fluxes: cold airflow, average with a temperature of 350 ° C, hot 550 ° C. Switching is carried out mechanically, in steps.
The building dryer is equipped with a comfortable double handle, which protects the operator's hand from the hot air. A thermal switch is built in to interrupt the operation of the tool when peak heat loads occur.
Pros:
- Power, fast heating.
- Dual handle.
- Cold and hot airflow.
Minuses:
- Build quality leaves much to be desired, disgusting smell of plastic.
- Long cooling after work.
STANLEY STXH2000 (STXH2000-RU) - fixing the start button
Easy hand tool household series. It is optimum for carrying out welding and soldering works with fusible materials. Able to perform the function of a glue gun for connection by means of polyethylene rods.
Heats the workpiece with subsequent deformation and addition of the required shape. Stepped temperature adjustment is provided.The device is adapted for stationary use with the release of both hands of the operator.
Pros:
- Lightweight, compact, stable.
- Powerful, the choice of the required temperature and heat flow rate.
- Fixing the start button for long work.
Minuses:
- Extensive features with poor configuration. The set of nozzles with different diameters is not provided.
HITACHI RH 600 T-NS (RH600T-NS) - case, complete set of nozzles
Ultra-lightweight hand tools for heating workpieces, parts. Able to perform welding functions with alloy materials. For this purpose, a complete set of nozzles with a different diameter of the output nozzle is provided.
The function allows you to localize the heating zone without overheating the entire processed product. Equipped with a dual-mode range of operation, - with a stepped temperature switch and a mass flow rate of heated air.
Pros:
- Very light, small, compact. Perfectly warms up the details.
- Convenient when working with electronic boards, for this purpose it is equipped with special nozzles.
- High-quality assembly, nice to hold in your hand.
Minuses:
- Over the top, pliable power button. During operation, from accidental grazing, simply turns off the device.
The best professional building hair dryers
Hand tools with extended lifespan, increased productivity. Multistage adjustment by temperature, heated air flow is applied. Increased power.
Built-in protective functions from peak overload, overheating. Some models are equipped with a display for visualizing data on the parameters of the air flow.
The tool is designed to heat the surface, clean of old paint coatings, sealants. Allows you to weld plastic, alloy metals. Selection criteria: power, performance, temperature range, equipment.
ELITECH TV 2000K - inexpensive among analogs
Professional series tool. Designed to heat the surface, deformation of the blanks to give a new shape. Able to weld plastic and low-melting metals based on tin, bismuth and lead.
It will help to clear parts from old paintwork. Will warm up the frozen sewer or water pipe in frosty time. Equipped with a display to display the current temperature.
Pros:
- Reliable, high quality, perfectly fulfills its function.
- Complete set of nozzles, case, comfortable ergonomic handle.
- Temperature adjustment, "purge" the gun.
Minuses:
- Quality nozzles disappoint. With intensive use, at extreme temperatures, quickly fail.
INTERSKOL FE-2000EM - digital temperature control
Hand tools equipped with a high-performance ceramic heater. This is achieved through the use of two elements. Equipped with a digital adjustment system temperature indicator in the range of 50 ~ 600 ° C in increments of ten degrees.
Operation in two modes - average air flow and maximum. Visualization of the current parameters is carried out through the integrated display. It is completed with four nozzles for heating an increased area or localizing heating during welding and soldering operations.
Pros:
- Equipment, power, digital temperature control.
- Liquid crystal display, indication.
- The convenient ergonomic handle, the tool sits as poured.
Minuses:
- The wire, when packed in a regular manner in a case, makes too much a bend, it bothers.
METABO H 16-500 - optimal for commercial use.
Tool with a long lifespan. Equipped with temperature control system and airflow. It is used in winter when defrosting frozen water collectors.
Successfully destroys the structure of old paintwork for the purpose of further removal. Built-in mechanism for cooling internal nodes from overheating. Installed cleaning filters for incoming air. The tool is equipped with a comfortable ergonomic handle with anti-slip pads.
Pros:
- High-quality assembly, reliability, unpretentious, long-lived unit.
- Very conveniently located in the hand.
- Easy to use, long soft wire.
Minuses:
- Practically nothing is completed, only the hair dryer itself.
ZUBR FT-P2000 M2DK - professional domestic development
Construction hair dryer Professional series of domestic development. Equipped with a powerful supercharger with the possibility of stepwise temperature adjustment. Provides dual-mode air flow.
Complete with storage case, four nozzles, scraper and trowel. It is used for soldering and welding of low-melting materials, works as a glue gun, heats old coatings with further removal. Built-in cold blow function.
Pros:
- Powerful, not heated, almost silent.
- Easy, does not smell like a nasty plastic.
- Reliable, unpretentious, a true domestic professional.
Minuses:
- Not enough specialized nozzles for welding.
BOSCH PHG 600-3 - professional wagon
Professional hand tools. Equipped with a reliable supercharger with a large lifespan. Able to separate adhesive joints based on low-melting plastic. Makes a warming up of the frozen pipes of the sewerage or water supply.
Heats car engines in frosty weather. There are three modes of operation, - small, medium and maximum. Built-in structural elements for stationary use.
Pros:
- Powerful, effectively cleans the old paint.
- Heats sticky nuts and bolts, removes ice plugs.
- Easy, wide range of application.
Minuses:
- It is not completed with a case, it is for a fee.
STEINEL HG 2220 E - Bar Design
Professional hair dryer with a core design. Equipped with a powerful reliable engine, providing high performance supercharger. Increased the upper threshold of heating to a temperature of 630 ° C.
Built-in dial switch heating degree. Nine adjustment steps are provided. A wide range of professional tools extends the functionality of the tool.
Pros:
- Compact, lightweight, powerful.
- Convenient temperature switch.
- Reliability, build quality.
Minuses:
- Only price.
It will be interesting to friends too
