With prolonged operation of the computer and the execution of a large number of tasks, the temperature in its main nodes increases, which leads to inhibition of the processes and even errors in the execution of scripts. To remove the heat, air active and passive devices are used, as well as liquid installations. We have prepared a rating with the best computer cooling systems for the video card, hard disk, processor, motherboard and case, where everyone can see the necessary characteristics for a particular case.
Content:
Best computer air cooling systems
These are devices for video cards, processors, cases and chipsets. Their cooling effect occurs mainly due to the fan, which rotates at different speeds, depending on the heating of the nodes, and cools the metal parts.
In addition, add-on radiators are used, which are in contact with computer components in order to more efficiently take heat.
Be quiet Pure Rock (BK009) - the best for the processor
This is an effective cooling system for a computer processor due to the presence of four tubes with a diameter of 6 mm each, which are connected to a heat-absorbing plate placed on the CPU and take temperature to a spacious radiator with a 120-mm fan.
The latter has a great potential for blowing due to the power of 1.44 W and an air pressure of 1.25 mm, but its dimensions do not interfere with the installation of video cards under it on the motherboard.
Pros:
- compatible with all Intel processors based on the 1151 chipset and AMD 2+, 3+, FM1, 2+;
- Included is an additional frame to the AMD platform (you do not need to buy anything else);
- the radiator is made of aluminum, and the tubes are made of copper, which is ideal for taking heat;
- the fan can rotate at speeds up to 1500 rpm;
- inside there is a sliding bearing;
- quiet operation of the cooler at different speeds from 19 to 26 dB;
- 48 plates are installed in the radiator to drain the temperature from the tubes;
- blades inject air flow 87 CFM, 51.4 m3 / h;
- power consumption of 12 V and 0.12 A;
- the fan is designed to work for 80,000 hours when operating at a temperature of 25 degrees;
- i5 cools easily when overclocked to 4.6 GHz to 40-45 degrees;
- compact dimensions 87x121x155 mm do not interfere with other nodes on the chipset.
Minuses:
- 22 cm power supply wire may be inconvenient in some cases (large enclosures and remote connector);
- AMD motherboards need memory modules below 33 mm, since the first two slots are overlapped with a radiator mount (the remaining slots allow you to install any RAM size).
Arctic Cooling Accelero Twin Turbo 3 - the best for video cards
This model is suitable for all types of graphics adapters Nvidia and Radeon, to ensure their long-term operation with a serious load on the video. The case of the air cooling system consists of a solid plastic frame and two fans with a diameter of 92 mm each.
On the reverse side there are five tubes for alignment with the mounting plate and heat dissipation into a thin radiator. The blades are closed with a stylish grille that will look spectacular in a translucent system unit.
Pros:
- power dissipation 250 W;
- the speed of rotation of the blades is adjustable by the user (forcibly) or by the system (automatically), and set from 900 to 2000 rpm;
- 53 mm slim case does not take up much space on the motherboard;
- Includes 4 pin power supply connector;
- lowering the temperature of the video card in the stream is 34 degrees, and at a maximum load of 78 degrees (on the Nvidia GTX 560);
- silent work of a cooler 25 dB;
- in a set of mounting parts for any video card.
Minuses:
- no additional backlight;
- on some compatible models, you have to file the boards (the plastic itself) and the corners of the radiator to insert the device;
- the cost of 3,500 rubles;
- after installation, additional cooling in the power circuit may be required.
Zalman ZM-F3 SF - the best for the body
This fan is the best cooling system for the computer case due to the cost of 350 rubles and effective processes on the blades, which resemble shark fins.
This technology allows you to capture and pump even more air mass than at the same speed, but with smooth blades. It also prevents vibrations and work noise.
The device is mounted on the back of the system unit and can be in black or transparent design.
Pros:
- 9 blades of the cooler;
- 4 shark fins on each blade to prevent turbulence;
- 120 mm diameter of the fan;
- easy rotation on the sliding bearing;
- soft silicone mounts do not allow the body to rumble when working;
- calculated for use within 50,000 hours;
- light weight 125 g;
- a thin case of 25 mm will not protrude excessively beyond the dimensions of the system unit or take up space inside;
- cost only 350 rubles;
- noise level 23 dB;
- Easy connection to most PCs thanks to the 3 pin connector;
- cools the body when the browser is up to 35 degrees.
Minuses:
- assists in the capture of dust and its tension inside the case;
- acceleration of rotation to 1200 rpm;
- thin plastic requires careful installation (if you drag the mount, it can burst the ear).
The best liquid computer cooling systems
Such equipment is used for high CPU utilization with serious graphics and video games.
The fan may not have time to cool the main board, so they use liquid systems with a pump, where the best models quickly remove heat through the filled tubes and lower the temperature.
NZXT Kraken X62 - for super powerful processors
The cooling system of the computer has a compact pump with a copper plate, which is mounted directly on the top of the processor. Through thermal paste, the CPU quickly transfers heat to the copper surface, and the pump pumps the heated fluid to the two fans built into the radiator.
Due to the long hoses, coolers can be placed on the wall of the case so that the hot air is not distributed inside the system unit, but outside.
Pros:
- stylish lighting from different diodes with a logo on the pump;
- 7 blades in each fan;
- plate 70 mm in diameter for efficient heat transfer from the processor;
- 140 mm fan diameter facilitates the quick removal of heat from the case;
- hydrodynamic bearings;
- adjusting the backlight, the speed of the pump and fans through the software from the manufacturer;
- Included are many adapters for connecting to various motherboards and processors;
- aluminum radiator;
- rotation of the pump from 500 to 2000 rpm;
- fan rotation from 500 to 1800 rpm;
- long nozzles for the supply of liquid 400 mm;
- Included are power cables for fans and a mini USB cable for connecting the controls.
Minuses:
- the cost of 10,000 rubles;
- plastic frame easily bends and sags when pressed;
- noise level at maximum speed 38 dB;
- may at first emit a crackle from the circulation of fluid in the system;
- job application from the manufacturer is unstable;
- the bulky size of 315x143 mm may not fit into some system blocks.
Arctic Liquid Freezer 120 - for a small body
This is the best computer cooling system, assembled in a small case, due to the dimensions of the unit with a fan 120x155 mm.
The device has two fans, which are placed one after another, which increases the amount of heat given off, but does not require much space to accommodate the unit. The water module is equipped with a copper plate, which has a high heat transfer.
Pros:
- cooling is designed for processors with common sockets 1151, 1156, 1155, AM3, AM2;
- radiator with dimensions of 150x120 mm;
- hydrodynamic bearings for easy rotation;
- speed adjustment;
- diameter of coolers is 120 mm;
- aluminum radiator plates;
- 9 blades in each fan;
- on i3 processor, when overclocked to 5.2 GHz, it shows 62 degrees;
- quiet operation of the pump and coolers.
Minuses:
- weight almost 1 kg;
- cost 6000 rubles;
- maximum speed up to 1350 per minute;
- short hoses from the waterblock require close proximity of the ventilation holes in the housing;
- pump speed is not regulated;
- Included are no gaskets for the motherboard (for bolts);
- due to the row arrangement of the two coolers, it is more difficult to fix it firmly in place and may have to expand the regular window.
EKWB EK-KIT P240 - for a large system unit case
Such a system of liquid cooling of the computer will be the best for placement in a large industrial-class PC case serving a large network.
The device consists of a water block and a separate reservoir for the accumulation and cooling of liquid, in which water flows from the radiator with the blowing of two fans. Such a ternary system gives high efficiency for temperature removal on powerful processors.
Pros:
- copper plate on water block;
- reliable fastening of the heat collector with the help of four bolts ensures tight contact of the surfaces;
- compatibility with sockets 1150, 1151, 1366, 1155, 2011 and AMD 2, 3, 4;
- the manufacturer provides a free mount to AMD at the user's choice;
- radiators consist of copper plates;
- two fans with a vertical arrangement and a diameter of 120 mm;
- rotation speed 1850 rpm;
- mixing the liquid in a large container received from the fan contributes to a greater decrease in temperature when the cooler is supplied to the processor;
- a separate pump removes the load from the mount on the motherboard;
- nickel-plated fittings;
- in the complete set a small bottle with a concentrate on 100 ml;
- there is a block for pumping and running;
- system components are sold separately, so the water block can be replaced over time, instead of buying the whole complex.
Minuses:
- rotation speed is not adjustable and remains at the maximum;
- the cost of 20,000 rubles;
- do not fit in a stationary system unit of normal size;
- no backlight;
- Splitter is only 100 mm long.
The best passive computer cooling systems
In addition to the fans and the circulating fluid, passive cooling is used, which is attached to the processor or video card, which takes heat and dissipates it through the radiator. It works in complete silence and without connecting to power.
Such a computer cooling system does not pull dust into the case and is easy to install. But this type can only be used on low-power processors.
Supermicro SNK-P0047PS - for office PCs
The cooling system fits any processor family with an LGA 2011 socket. The device is mounted on top of the CPU with the four screws included in the kit. Thermal grease is applied between the processor and the radiator to increase heat transfer.
The design includes 27 aluminum plates with a block size of 80x27x104 mm, which effectively dissipate the resulting heat, increasing the area of the surrendered surface.
Pros:
- the height of the block is only 27 mm, which will not interfere with other devices, and the dimensions of 80x104 will not allow them to rest against a video card or hard disk on any motherboard;
- the cost of the system is 1200 rubles;
- the socket fits modern processors;
- heat dissipation in the amount of 145 W TPD;
- easy installation with a screwdriver;
- no power connection required.
Minuses:
- not suitable for gaming computers with overclocking;
- dust patches that settle on radiator plates reduce heat transfer and require periodic cleaning;
- no tubes for heat dissipation away from the processor;
- no design elements (lighting or decorative forms) for a transparent body.
Supermicro SNK-P0048PS - for processors with a frequency of 2.5-3 GHz
This model is suitable for mid-performance processors due to the height of heat transfer plates 64 mm. In total, with the size of the pad of the device 104x80 mm and three through tubes, which immediately take away the excess temperature from the CPU, this gives good results.
For contact with the processor uses a copper plate, and all other elements are made of aluminum. The radiator is mounted on four bolts to the motherboard.
Pros:
- compatibility with LGA 2011 and 2011-3 sockets, and also suitable for 2 U servers;
- 3 tubes for heat distribution over the radiator with S shape;
- silent operation;
- the cost of 1400 rubles;
- weight of only 350 g will not create loads on the motherboard mount;
- thermal paste has already been applied to the base;
- closed top of the plates so that the dust does not get inside and does not impair the heat transfer;
- device material is aluminum and copper;
- dimensions do not interfere with the installation of a video card or memory drive.
Minuses:
- very clumsy design, not suitable for translucent cases.
It will be interesting to friends too
