mylogo

Now there is a huge amount of solid fuel boilers. First of all, among themselves they differ in the type of natural resources burned. Also modern boilers differ in their design and method of burning fuel. For example, there are solid fuel boilers long-burning, allowing you to spend on their service a minimum amount of time. As for the construction, here, first of all, attention is drawn to the heat exchanger, which can be made of cast iron, steel or some other materials. In this article we will try to consider boilers of various types. It looks like they will be only one - they all collect positive reviews on the global web.

 

 

best solid fuel boilers

Solid fuel boiler of which company to buy

Teplodar

teplodar

The Russian brand "Teplodar" was founded in 1997. You should not be afraid of its origin, Russian heating equipment is often not inferior to foreign products. At the same time, domestic equipment does not need to be imported from abroad, due to which its cost is often quite adequate. The range of solid fuel boilers "Teplodar" can not be called very wide. But on the other hand, all the models meet not only Russian, but also international quality standards. You can buy them in almost all major cities of our country.

Buderus

buderus

It’s hard to believe, but the Buderus brand has existed since 1731. For a long time it belonged to the eponymous German company. In 2003, this company was absorbed by a group of Robert Bosch GmbH. However, the brand continued to exist. Now it is managed by the Bosch Thermotechnology division, which has factories including in Russia. Solid fuel boilers Buderus show themselves from the best side, serving customers for many years.

Protherm

protherm

Protherm was founded in Prague in 1991. Her story began with the production of electric boilers. The founders of the company did not expect a rapid growth in sales, but it happened - Protherm products became known throughout Europe. This allowed the company to increase production rates, as well as expand the range, including by going to solid fuel boilers, which are gaining popularity. Now all Protherm products receive a certificate from the European Union, which indicates their highest quality.

Viessmann

viesman

About the German company Viessmann, even the edge of the ear heard many fans of winter sports. This brand is actively advertised in biathlon, ski jumping and cross-country skiing. The company was founded in 1917, since then it has not lost its independence for a minute. Almost 8,200 employees provide products with the best quality. Viessmann solid fuel boilers are often able to serve for decades. Their only drawback is the high price - at least in the Russian retail.

Wirbel

wirbel

The boiler equipment Wirbel appeared in our market relatively recently. However, it quickly gained popularity, as the manufacturer made a bid for a low price tag and ease of use.

Solid fuel boilers Wirbel usually have a steel heat exchanger. In the assortment of the company there are including dual-circuit models. In short, the Russian manufacturer is trying to keep up with foreign colleagues, while trying to keep the cost at an acceptable level.

Cast iron solid fuel boilers with the best reviews

Protherm Beaver 50 DLO

Protherm bober 50 DLO

A classic solid fuel boiler, designed, as it were, especially for the harsh Russian conditions.If you at least once faced with similar products, then easily cope not only with the control of the device, but also, perhaps, with its installation. The maximum heat output of this model is 39 kW, which is an excellent parameter even for a large enough house. The efficiency here is also quite good - it reaches 90.2%.

This boiler is single-circuit, and its combustion chamber is open. In a word, the engineers tried to make every effort in order not to complicate the life of the owner of their creation. As a fuel, you can use coal or wood here. The primary heat exchanger is made of cast iron, which makes it almost eternal. Coolant temperature can reach 85 ° C. The water pressure is recommended to keep at 3-4 bar.

Advantages:

  • High-quality cast iron heat exchanger;
  • The boiler includes a pressure gauge and a thermometer;
  • Two types of supported fuel;
  • Fully non-volatile;
  • Simple mechanical control;
  • Relatively easy installation;
  • High heat output.

Disadvantages:

  • The bottom of the boiler is hot enough;
  • Far from the cheapest.

Lamborghini WBL 7

Lamborghini WBL 7

Everyone knows the Lamborghini supercars. Some people know that there are tractors under the same brand. But practically none of the Russians suspect that the same Italian company also produces solid fuel boilers. Buying a Lamborghini WBL 7 is a good way to show off in front of your neighbor. And not so much a famous brand, as the capabilities of this device. Its main feature is the possibility of transition from solid fuels to gas or diesel fuel. This makes the boiler universal.

The creators tried to ensure that their product fulfilled its function, if not forever, then for at least three to four decades. To do this, they made a heat exchanger cast iron, and also achieved complete energy independence. Everything is in order here and with efficiency reaching 90%. None of the competitors considered further is capable of such a boast! The work of the boiler is not audible even if you are in close proximity - for this you should thank the sound insulation system.

Advantages:

  • Produced in Italy;
  • Belonging to all well-known automotive brand;
  • Non-volatility;
  • Firewood is 67 cm in size;
  • Power can be adjusted automatically;
  • Easy maintenance;
  • Minimum noise level;
  • Cast iron heat exchanger;
  • The possibility of using diesel or gas.

Disadvantages:

  • Not very high power (29.4 kW when powered by coal);
  • High price.

The best steel solid fuel boilers

Bosch Solid 2000 B SFU 12

Bosch Solid 2000 B SFU 12

Boiler with respectable appearance. Its heat exchanger is made of steel, and therefore the weight of the device is not very large - it does not exceed 155 kg. The boiler is endowed with a manometer and a thermometer, thanks to which the control is noticeably simplified. Unfortunately, the steel heat exchanger affected the efficiency, which here barely reaches 84%. But Bosch Solid 2000 B SFU 12 is cheaper than cast-iron analogs.

It is recommended to use coal as a fuel here. But you can use and coke, coal or wood briquettes, as well as simple wood. Just in case of application of the above types of fuel, the thermal power may not be as big as we would like. It should also be noted that the boiler is non-volatile and uses a mechanical type of control.

Advantages:

  • You can use different types of fuel;
  • Mechanical control;
  • The temperature of the coolant can be increased up to 95 ° C;
  • Does not depend on the availability of electricity;
  • Not the biggest weight;
  • Not very high cost;
  • Present thermometer with pressure gauge.

Disadvantages:

  • Maximum heat output is only 13.5 kW;
  • Low efficiency.

ZOTA Carbon 20

ZOTA Carbon 20

This model got its name in honor of the color of the part of the body, made in the style of carbon. Like the boilers discussed above, the device is non-volatile and uses an open combustion chamber. Thermal power varies from 7 to 20 kW, which allows you to put the boiler in the workshop, and in a small country house. It is necessary to load coal or coal briquettes here, depending on your preferences.

The device is able to bring the temperature of the coolant to 95 ° C. To maintain the desired parameter is used TEN. Mechanical control does not cause any problems; even an elderly person can cope with it.

You can regret only about the efficiency of 80%. But this is the trouble of the vast majority of steel models. Some of the sadness is caused by the 176 kg weight of the boiler - two or even three men will be required to install it.

Advantages:

  • Maintains water pressure up to 3 bar;
  • Perhaps a very strong increase in temperature;
  • Simple operation;
  • Good heat output;
  • It doesn't matter if there is electricity in the house;
  • It has a pressure gauge and thermometer;
  • Sane price tag.

Disadvantages:

  • Only two types of fuel can be used;
  • Very low efficiency.

The best cauldron of long burning

STROPUVA S40

STROPUVA S40

If a boiler is purchased for a workshop, and the manager is not going to allocate individual personnel for its maintenance, then a special model will be required. For example, a good choice could be the STROPUVA S40. This product belongs to a special class - to long-burning boilers. Up to 50 kg of firewood can be loaded into its combustion chamber. They will burn up to 70 hours - so much time to the boiler can not be approached.

Everything is in order with the device and with heat output. This parameter reaches 40 kW, which indicates the possibility of heating the premises with a total area of ​​up to 400 m2. In short, this is a great industrial design. You can buy it for an ordinary country house, but in this case, you must be a wealthy person - the price of STROPUVA S40 is biting. It is interesting that in all other respects the boiler doesn’t stand out in any way - it is a traditional single-circuit model that uses wood and wood briquettes to generate heat. The heat exchanger here is steel, and the combustion chamber is open.

Advantages:

  • Very high heat output;
  • Relatively small size;
  • Easy management;
  • Fuel burns for a very long time;
  • Does not depend on electricity;
  • The temperature of the coolant can reach 95 ° C;
  • There is a safety valve.

Disadvantages:

  • Only wood is suitable as a fuel;
  • Efficiency - only 85%;
  • Weight reaches 291 kg;
  • Frightening cost.

The best pyrolysis solid fuel boiler

Buderus Logano S121-2-32

Buderus Logano S121 2 32

Excellent boiler from a division owned by Bosch. Power output reaches an impressive 32 kW. But to achieve this parameter, you have to spend a large amount of fuel, since the efficiency here is extremely low - it is only 78%. Also, the buyer is able to slightly strain the electronic control, due to which the boiler requires constant availability of electricity (it is connected to a single-phase network).

The device displays all the most important parameters on a digital display - you can see the temperature and pressure on it. Also part of the boiler is an open-type combustion chamber. The heat exchanger is made of steel, but this did not reduce its weight - the total mass of the boiler, together with its 150-mm chimney, reaches 375 kg. The exhaust fan should please the buyer - he is present here, and his work is almost inaudible.

Advantages:

  • High temperature coolant;
  • Easy to understand management;
  • Existence of the exhaust fan;
  • Maintains high pressure in pipes;
  • Apply modern technology;
  • High heat output.

Disadvantages:

  • It eats only firewood;
  • Very heavy;
  • Extremely low efficiency;
  • Almost the maximum cost;
  • Non-volatile.

Budget solid fuel boiler with the best reviews

EVAN WARMOS TT-25K

evan WARMOS TT 25K

This relatively inexpensive boiler is made according to classical principles. It has a single circuit type, its combustion chamber is open, and the heat exchanger is made of steel. And do not be confused by the low efficiency - partly to save the energy obtained during the combustion of fuel, helps the heater with a power of 2 kW.

The maximum heat carrier is heated by this boiler to a temperature of 95 ° C. Peat, coal and, of course, firewood are allowed to be used as fuel. Depending on the fuel used, the heat output can vary from 8 to 25 kW. Theoretically, EVAN WARMOS TT-25K can heat a room of 180 m2, which is a very good indicator. One can not but rejoice in the complete energy independence and mechanical control.

Advantages:

  • Powerful heater in the kit;
  • Maintains decent water pressure;
  • Simplest control;
  • Heats very large rooms;
  • It is inexpensive;
  • Does not depend on electricity;
  • Different types of fuel;
  • The minimum weight (125 kg);
  • It is possible to install 55 cm firewood;
  • Available both the manometer, and the thermometer.

Disadvantages:

  • Efficiency - only 75%;
  • The fuel burns fast enough;
  • Not very high reliability.

Which solid fuel boiler to choose

1. In this article we tried to talk about a variety of boilers. All they are united only by the fact that they are primarily designed to work with solid fuels. You just have to pay attention to the other parameters. For example, it depends on the material of the heat exchanger how much fuel will be wasted, as well as the service life of the boiler. The volume of the combustion chamber is also a very important parameter, which indicates how often it is necessary to approach it to load a new batch of fuel.

2. It is impossible to recommend a specific model for purchase. It all depends on what kind of room you are going to heat. It is necessary to take into account even the material from which the structure was created, as well as its disrepair! You need to take into account the natural conditions that occur in your area in winter.

It will be interesting to friends too

 

 

 


mylogo

Selection

Ratings