Liquid nails have long become a household name and apply to all kinds of fast-setting glue. It is used for construction and repair, replacing literally metal nails for a strong connection of surfaces. In our ranking of the best liquid nails, proven products are provided that will not fail with their quality. This will help you choose the appropriate option for bonding tile, metal, plastic, glass and wood.
Content:
Best Water Based Liquid Nails
The water base of liquid nails in the name already implies hanging ecological purity. Such a substance is well suited for use on materials with which a person contacts (finishing of a bedroom, children's room, repair of furniture). They produce less unpleasant odor. But in view of the water base, their strength indicators are slightly lower than their counterparts, therefore they are suitable for non-critical structures (not experiencing excessive loads).
Moment Installation Express MV-50 - for decorative panels
These are the best liquid nails for use in finishing living rooms because of their environmental cleanliness. Suitable for metal, polystyrene foam, wood and plaster.
It is best to use them when installing wooden panels due to low consumption and the ability to interact with all types of chipboard and MDF. Available in packs of 400 g.
Pros:
- comfortable tube with a long spout and a screw cap;
- each m2 treated with glue can withstand weight up to 50 kg;
- if something is attached crooked, then within 15 minutes you can make adjustments;
- moderate frost resistance;
- safe for respiratory organs.
Minuses:
- you have to wait 15 minutes to set, and the total drying time is 48 hours;
- can be applied at a temperature not lower than +10 degrees.
Ultima 309 - for bricks
These are the best liquid nails when you need to attach something to a bare brick. In order not to drill a wall with a perforator, it is enough to drop glue on the surface and press it down for 5 minutes.
The tool is available in packaging type cartridge and requires a gun for extrusion. The long spout allows access to hard to reach places. Supplied in containers of 360 g.
Pros:
- on the tube, a special ring to fix the nozzle in it after use and to tighten the neck for tightness;
- cost for 360 g from 150 rubles;
- setting time only 5 minutes;
- suitable for use both outdoors and inside the house;
- resistant to water;
- after 24 hours it is allowed to give full load;
- glued to concrete, brick, stone.
Minuses:
- need a construction gun;
- cannot be used if the outside temperature is above +35 degrees.
Top rubber-based liquid nails
The rubber base provides enhanced strength characteristics and resistance to frost and moisture. The substance is good for use both inside and outside the house. Excellent keeps building materials under load.
LIQUID NAILS LN-915 Baths - for finishing wet rooms
These are the best liquid nails for attaching foam plastic, drywall or plastic. Glue works well with polystyrene foam. Available in a brown-blue tube under the construction gun.
Through a transparent nozzle it is convenient to see the beginning of the feed. The basis of synthetic rubber tolerates frost and constant moisture. The cartridge contains 310 g of funds.
Pros:
- low consumption - with a seam width of 6 mm the tube will be enough for 10 meters;
- has antiseptic properties and prevents the formation of fungus;
- pronounced moisture resistance;
- You can work at a minimum room temperature of +5 degrees;
- no flow - dry residue is 75%.
Minuses:
- for setting you have to wait 20 minutes;
- only for interior work;
- not suitable for harder materials (stone, metal, tile);
- brown color of liquid nails is not suitable for design everywhere (in places where it can be seen in the seams).
Krass Builder Universal - record resistance to negative factors
These are the best liquid rubber-based nails for use in harsh environments. The product is produced in a cartridge with a screw-on spout and its own cap that prevents drying. The container contains 300 g of substance.
Glue is suitable for brick, stone, concrete, plaster, PVC. It can be used at an outdoor temperature of -20 degrees in winter and +50 degrees in summer.
Pros:
- cost for 300 g from 150 rubles;
- resistant to direct precipitation;
- beige color is not as noticeable and fits most building materials;
- chemical resistance to paints and varnishes;
- suitable for parts working with vibration (after solidification, it will firmly hold the sides as well as on static structures).
Minuses:
- the sides can still be moved for 10 minutes, which requires pressing heavy parts so that they do not move;
- It is very difficult to wash off traces with a solvent.
The best liquid nails on synthetic resin
Synthetic resins have increased adhesion and tensile strength. The substance is resistant to negative temperatures and open exposure to water. It is optimal for use outside the house / apartment and has a long service life.
The moment of Installation Universal MR-40 - with low price
Such liquid nails are the best because of their affordable price. Over 400 g of the substance will have to pay only 120 rubles. The product differs from the German brand universal application. Suitable for metal, glass, wood, stone.
Pros:
- You can operate the finished products with this glue at a temperature of +70 degrees and -40 degrees;
- it is allowed to put structure even at a frost of-12 degrees;
- liquid nails are water resistant;
- something can be corrected for another 15 minutes.
Minuses:
- the cartridge does not have a screw cap and you need to use the entire container at one time, otherwise it dries;
- final drying time reaches 168 h.
It will be interesting to friends too
