mylogo

The easiest way to perform interior decoration with wall panels. This does not require removing the old layer of plaster, leveling the surface or other complex work. It is easy to make concealed wiring under the attachment plates, and the thickness of the finishing sheets will serve as additional warming. Apply this method of repair in offices, shops, studios, as well as when changing the situation in the hallway, kitchen. Attach the material can be on the walls and ceiling, at right angles and diagonally. From our ranking of the best wall panels, you can see the most popular products of this industry from fiberboard, MDF, PVC, gypsum and natural wood fiber, which will help to understand their advantages for a particular type of room.

 

 

Wall panel

The best wall panels from MDF

Such materials are characterized by high strength. MDF plate can be from 6 to 18 mm thick, which will affect the insulation and sound insulation, additionally protecting the room. Make such slips in Russia and Europe.

MDF Aplast Olio brick texture - the perfect kitchen apron with olives and oil

MDF Aplast Olio brick texture - the perfect kitchen apron with olives and oil

These are the best wall panels for kitchen refinement, which are produced by the ready-made set with thematic pattern. The plot size is 2440x610 mm, and it is intended to cover an area of ​​1.4884 m2. This allows you to place it above the worktop, stove and sink in one row.

The MDF trim is suitable for various colors of furniture and walls, because the olives and oil shown are dark blue, green, brown and white. The design is created in the form of a brick with a photo panel.

Pros:

  • an appetizing picture corresponding to the kitchen theme;
  • sold ready-made set and fits the size of most kitchens;
  • the image allows it to be placed at an angle at the junction of the walls (in a small kitchen), while the plot will not be spoiled;
  • the mass of the whole set of 5 kg is convenient for transportation;
  • embossed texture, which makes the design even more interesting;
  • the surface has a moisture resistant coating, so you can not be afraid of splashing from the sink;
  • Immediately closes most of the walls (1,4884 m2), which do not have to finish.

Minuses:

  • cost from 1,800 rubles;
  • 6 mm thickness insulates enough if it is a wall facing out or into the staircase;
  • if the cabinets hang too low, you will have to outweigh them so that the whole picture is visible with a width of 610 mm.

MDF Wand der Welt Status 2 Moonstone - for the living room

MDF Wand der Welt Status 2 Moonstone - for the living room

These are the best wall panels for living room decoration, because they visually increase the size of the room, making it more spacious. MDF plates are covered with photo printing in the form of vertical panels with gray columns and wavy elongated lines.

This shade is suitable for most types of furniture (beige, white, gray) and flooring. The dimensions of the linings 2700x113 mm are gray, and 2700x301 mm are white with thin threads.

Pros:

  • the cost is one of the most affordable - 723 rubles per package with an area of ​​2.24 m2;
  • there is a small laminating layer, so the surface can be washed periodically;
  • even suitable for the ceiling;
  • the width of the strips is convenient for planning the arrangement of panels with minimal cutting work;
  • interesting high-tech design;
  • eco-friendly coating;
  • high wear resistance of the surface (up to 10 years).

Minuses:

  • thickness 6 mm;
  • the weight of one package is 9 kg, and for the living room it will take about 20 such sets, which will be 180 kg.

The best wall panels DVP

Such materials are used for offices and corridors, kitchens, living rooms. Fiberboard has a lower density, and therefore has a light weight, which is convenient for installation and transportation. Its insulating properties are lower than in MDF.

Fiberboard DPI Brown Old dark board - with eucalyptus fibers

Fiberboard DPI Brown Old dark board - with eucalyptus fibers

This is the best wall panel of fiberboard for the child's room, because it includes eucalyptus fibers and natural resins, which ensures high environmental friendliness and easy breathing of all users.

The material is hypoallergenic and suitable for people with various asthmatic diseases. The design in the form of an old dark-colored board creates the effect of a completely wooden room, which increases comfort and warmth.

Pros:

  • natural drawing of photopanel with knots, wood rings and a junction of boards;
  • light weight of the whole set of 5 kg;
  • relief surface texture;
  • melamine coating;
  • immediately closes a large area of ​​2,979 m2;
  • high mechanical strength and resistance to scratches and chips;
  • natural oils in the composition of the fibers;
  • long service life.

Minuses:

  • high price of 3150 rubles per set;
  • a large panel of 2440x1220 mm is difficult to transport;
  • thickness 6 mm.

The best PVC wall panels

This type of finish is not inferior to MDF, and contains a wide variety of colors and shapes. Material is created from a variety of plastic, and therefore is not subject to rotting, fungus, does not swell and is able to serve up to 20 years.

PVC Regulus Decoam Brick old gray - for the corridor

PVC Regulus Decoam Brick old gray - for the corridor

These are the best PVC wall panels for the corridor, because their cost is only 145 rubles per 1 slab with dimensions of 1030х495 mm. The size is optimal for modeling location and transportation. The design imitates white matte brickwork, which makes the walls more massive.

The material can be washed and used even in unheated rooms, because it does not absorb moisture.

Pros:

  • weight is only 100 grams of each panel;
  • cost 145 rubles;
  • moisture resistant surface;
  • one patch at once 0.5 m2;
  • You can purchase packaging with an area of ​​15,300 m2;
  • high-quality drawing, hardly distinguishable from natural laying due to the execution of prints on expensive equipment;
  • in the package installation instructions.

Minuses:

  • PVC layer thickness less than 1 mm;
  • white background will need more frequent washing.

The best gypsum wall panels

This type of material is used to decorate studios and offices. It can be applied not on the whole wall, but only on some part, combining with other types. The panels are thick and resistant to high temperatures.

Artpole Silk 2 3D plaster panel - for wall decoration around a fireplace

Artpole Silk 2 3D plaster panel - for wall decoration around a fireplace

This is the best wall panel to cover the wall around the fireplace, because the material is completely non-flammable. Wavy shapes with 3D edges will immediately highlight this part of the room, attracting attention.

Gypsum promotes the intake and efficient distribution of heat from the heat source. Matte color will not glare in the sun. The material serves as an excellent sound insulation, so by covering it with an adjacent wall with neighbors, you can completely save yourself from extraneous sounds.

Pros:

  • fire hazard class KM0;
  • thickness 25 mm;
  • embossed stylish surface;
  • the particular shape of the graceful element influences perception, giving peace and serenity to the interior;
  • wall with such plates is an independent piece of furniture.

Minuses:

  • on 3D protrusions dust is collected that will often have to be cleaned (the higher the wall, the more uncomfortable it is);
  • one element covers only 0.36 m2;
  • the weight of one plate is 6 kg;
  • the cost of 1440 rubles per block 600x600 mm.

The best cork wall panels

This type of decoration is very popular in offices and public places (hotels, restaurants), because it has high heat and noise insulation, and also has a light weight and simple installation method.

Egen Miami Natural - for the office

Egen Miami Natural - for the office

These are the best wall panels for finishing the cabinet, as they have a sound absorption of 0.1 dw, which will allow all confidential conversations to remain closed.

The room will work comfortably due to the preservation of heat with resistance to metabolic processes in the range of 0.0583 m2 K / w.Externally, the cork coating of Portuguese production has large segments, which looks unusual and stylish.

Pros:

  • Lightweight 0.5 kg allows you to mount cork panels, even on thin partitions;
  • wax coating protects against moisture absorption and creates additional surface gloss;
  • increased sound and heat insulation;
  • includes natural veneer and cork backing;
  • no harmful fumes;
  • simple installation.

Minuses:

  • cost of 840 rubles per 1 m2;
  • thickness 3 mm;
  • 300x600 mm longer strips to mount.

It will be interesting to friends too

 

 

 


mylogo

Selection

Ratings