Top 10 bricks

Bricks are used for various types of repair and construction works. The material is divided by density, shape, size, weight, hardness and fire resistance. It is necessary to choose a brick with skill, understanding that there are more than six types of similar blocks, each with its own purpose. To help in this matter, we have compiled a ranking of the best bricks, familiarizing with the most frequently purchased and popular products of this industry for creating partitions, load-bearing walls, laying niches, facade cladding and as decorative decoration of various designs.

The best building brick

Such bricks have a simple form and a discreet appearance, since they are used for the construction of walls and partitions, which are subject to subsequent finishing in the form of plaster.

It differs in cheap cost and various strength, which should be taken into account depending on the number of floors of the building and other loads.

Full-bodied Tellurion 1 NF - for outbuildings

This is the best building brick for creating simple buildings in the yard in the form of premises for breeding pets, a workshop or for storing materials. The cost of one unit starts from 6.20 rubles.

The blocks have slightly smoothed corners and pronounced edges along the sides, which facilitate grip during masonry and increase the hitch of subsequent finishing materials.

Pros:

• Cheap price from 6.20 rubles per unit;
• good evenness of the lower and upper sides for the correct row of laying;
• low water absorption in the range of up to 14%;
• strength mark M150 is optimal for non-critical buildings;
• contributes to the preservation of heat in the room due to thermal conductivity of only 0.51 W / (m * s);
• on the pallet fits up to 250 pieces.

Minuses:

• due to pronounced ribs on the sides, they often split off the edge during loading and unloading;
• you need skillful dosing of the solution, because all the excess will protrude out due to the absence of voids in the brick structure;
• low frost resistance 35F;
• the weight of each unit of 3.5 kg for the whole day will make the arm very tired.

MOSCOW-KASHIRSKY 2.1NF - ceramic brick for accelerated rates of construction

This is the best building brick of ceramics for the construction of buildings in a short time due to the size of blocks 2.1 NF, which allows you to replace two standard bricks with one brick at a time.

The internal voids in the amount of 19 pieces as much as possible reduce the mass and contribute to picking up the solution with fixation from the inside.

Pros:

• the ribbed surface of the side parts is convenient for grip by hand;
• the optimal price is from 10.90 rubles per piece, considering the double size 2.1 NF;
• water absorption of not more than 10% can be used when laying in basements and tunnels;
• frost resistance of 100F;
• effectively retains heat due to a thermal conductivity of 0.26 W / (m * C);
• 180 large bricks are placed in the pallet at once.

Minuses:

• weight 4.8 kg of each unit is heavy when working with one hand;
• The smooth surface of the ceramic can slip out of your fingers.

The best facing brick

Such materials are used to lining the bearing walls and make them more attractive. When choosing pay attention to the design and quality of the finishing of the front, and the strength characteristics fade into the background.

BRICK BKZ LIGHT 1 NF - for the facade of an office building

This is the best facing brick for finishing an office building, because it has a noble ivory color and an affordable price of 10 rubles per piece.

The three sides are as smooth as possible, and the fourth has a ribbed surface for a larger bond with the bearing wall.19 rectangular holes facilitate the block and facilitate the intake of the solution inside.

Pros:

• comfortable weight for work 2.1 kg;
• strength mark M150 is optimal for this use;
• absorbs moisture no more than 12%;
• 480 pieces fit on the pallet, which is convenient for loading and transporting a large batch.

Minuses:

• very smooth surface slips out of hands;
• frost resistance F50 can withstand small drops, but does not peel off;
• due to the specific color needs careful selection of the hue of the solution.

BRICK RKZ TERRACT RUST 1NF - for finishing the cottage

This is the best facing brick to create a noble finish of a large country house, because its surface is provided with relief grooves according to the “bark beetle” principle, which creates an interesting pattern of masonry without additional manipulations.

The 30 holes in the middle have different sizes, and this helps to avoid brittleness and the location of internal partitions in the same places.

Pros:

• original look of facing;
• conveniently taken with your hands due to the rough relief surface;
• block weight 2.2 kg;
• water absorption within 11%;
• high resistance to frost at F100;
• strength characteristics M150;
• poorly conducts heat due to airbags;
• 480 pieces on a pallet.

Minuses:

• cost from 22 rubles per unit;
• no ribbed side on the back for coupling with masonry;
• It is difficult to choose a solution that blends beautifully with a dark brown color.

The best clinker brick

These materials are made from a special type of clay annealed at a temperature of 1200 degrees. Due to this, the brick gets a beautiful shade and high strength of the front part. Apply it to decorate the face or create arbors, benches, sidewalks and sides in the park area.

ROBEN VICTORIA RED HATED - for extremely cold regions

This is the best clinker brick for finishing the facades of houses in cold regions, because its frost resistance index is F300, which has few analogues in similar materials. The appearance is decorated with chaotic grooves, giving it the features of hewn stone.

Small holes inside create cavities and facilitate weight, but leave thick walls to maintain the strength and integrity of the unit.

Pros:

• convenient to take with your fingers during laying;
• Looks nice with ordinary gray solution;
• proven reputation of the Polish brand;
• record low water absorption within 4-5%;
• high strength block M500;
• thanks to voids, the mortar penetrates inside and reliably binds the masonry.

Minuses:

• cost from 62 rubles for 1 piece.

LSR NEAPOL SNOW-WHITE CANE 0.7 NF - for restaurants and salons

This is the best clinker brick for finishing the facade of a restaurant or a beauty salon, because it has a snow-white color with thin vertical notch lines, which add elegance to the masonry and more expensive look.

Inside, there are 16 voids to reduce overall weight and firm seating. Thick walls of partitions contribute to the strength of the block and prevent its breakage during unloading.

Pros:

• original design;
• comfortable weight of 2.6 kg, from which less tired hand;
• 480 units were laid in the pallet immediately;
• the rough surface does not slip out of hands;
• hollow promotes increased connectivity between rows;
• moisture absorption is very low and is 5%;
• resistance to low temperatures within 100F;
• high strength M300.

Minuses:

• cost from 35 rubles per unit;
• the small size of 0.7 nf will require a larger amount for laying 1 m2;
• It is difficult to choose the color of the solution and maintain its unity in a large area of ​​masonry.

The best hyper pressed brick

This type of blocks is used to design the facade of buildings under a wild stone. Effectively look from it the sides of the fountains and park fencing.

The material is obtained by semi-dry pressing of the cement-limestone mixture and its subsequent steaming in the chamber, which gives the brick high strength.

LITOS LUNAR MARBLE ROKKO ROCK WHITE WDF65 - for parks

This is the best hyperpressed brick for decorating the sides in parks due to its presentable marbled look.

The front surface has a rough relief with high unhewn edges, which resembles a wild stone with its natural fortress. Inside the blocks are equipped with large holes to facilitate the mass and set the solution.

Pros:

• 600 pieces are immediately placed on the pallet;
• optimum weight for long work with material 2.4 kg;
• hollow structure with large-diameter holes for reliable coupling between rows;
• water absorption is not more than 7%, which allows the arrangement near the fountains;
• frost resistance F250;
• high strength block M350;
• it is convenient to take small blocks by hand when working.

Minuses:

• cost of 30 rubles per item;
• WDF65's small format will require the purchase of more bricks;
• It is difficult to choose a suitable color solution.

The best brick of manual molding

These are products manufactured by the old method with the manual formation of blocks and powder of the surface with quartz sand.

The resulting elements have high strength and are an excellent insulator. They can be used for masonry bearing walls unaccompanied by subsequent lining.

VANDERSANDEN FINESSE NEO MAGNOLIA DF PINK - when you build a house for yourself

This is the best hand-molded brick for building a house for your family, because it has high strength for load-bearing structures and does not need further finishing.

The interesting design of the blocks is distinguished by the transition from dark brown to soft pink, which creates a chaotic variation of colors and an original look. This surface looks interesting both from outside the house and from the inside, especially if there is a fireplace.

Pros:

• small weight of 2.4 kg;
• thermal conductivity not higher than 0.5 W / (m * s);
• corrugated surface;
• strong block structure due to solidity;
• high resistance to frost with F200;
• material resistance to stress M250;
• 600 pieces on the pallet at once.

Minuses:

• the high cost of the Belgian product - from 106 rubles per item;
• the small size of the DF will require large masonry manipulations;
• the absence of voids reduces the ligament between the rows.

VANDERSANDEN IMPULSE LIVORNO WF BLACK-ANTHRACITE - for museums and showrooms

This is the best hand-molded brick for wall decoration in a modern museum, exhibition car showroom or show room, due to its rich appearance and dark shade, highlighting objects located next to it.

The bricks are made in black and anthracite color with a pronounced chaotic pattern of relief.

Pros:

• rich appearance;
• weight, convenient for work, in 1,75 kg;
• the material is well tolerated at low temperatures during storage and in finished form in the masonry;
• protects against heat release through walls due to a thermal conductivity of 0.5 W / (m * s);
• 800 pieces are delivered immediately in the pallet;
• convenient to take with one hand.

Minuses:

• the cost of one unit is from 95 rubles;
• a small WF format will fit longer.

The best silicate brick

Made from quartz sand and lime, which makes it white or light gray. Apply these blocks for rough laying and cladding. Brick stands out for its affordable cost and variety of sizes, as well as sound insulation.

Silicate One-and-a-half front KSP-801 M150 - for finishing school or kindergarten

This is the best silicate brick for finishing a large school or kindergarten building due to its large one-and-a-half size, which makes it possible to reduce masonry manipulations and a low moisture absorption rate within 6%, which effectively protects walls from fungus, destruction and freezing. The brick is produced in large blocks of snow-white color with smooth edges.

Pros:

• affordable price from 8.30 rubles per piece;
• quick finish of the facade due to the size and a half;
• presentable appearance with a smooth surface and pleasant color;
• material strength M150;
• low water absorption up to 6%;
• high noise insulation;
• acceptable frost resistance F75.

Minuses:

• it is inconvenient to take large blocks with one hand;
• thermal conductivity is higher than that of clay bricks, and is 0.95;
• the absence of voids reduces the adhesion of bricks among themselves and increases the mass.