Cables allow you to easily cut at once all the wires of the cable with the most even edge, which is convenient to clean and solder. This tool is used in shops selling cable products and craftsmen in broaching and connecting various communications. There are models that allow wire cutting even under voltage, which is possible due to the thick insulation of the handles. The rating of the best cable cutters, based on user feedback and their characteristics, will help you choose the right tool for various activities that best suits your needs.
Content:
Top Dielectric Cable Cutter
This tool is used to work under voltage up to 1000 V, when there is no possibility to de-energize communication. Reliable insulation allows you to bite the cable without risking the wizard's life. When choosing, the maximum diameter of the cutters of the incisors and the class of insulation with a Volt protection indicator are important.
SHTOK 1000V 08108 - cuts despite the voltage of 1000 V
This is the best dielectric cable cutter that allows wire bites up to 1000 V.
For this, thick insulation with a rubberized coating on the outside is provided. So that the master’s fingers do not jump to live parts, there is a high side-support in front of the hinge.
For it is convenient to cling the tool to the belt in the loop. Oval working head of a compact form, which is convenient for access in a narrow cabinet or panel board.
Pros:
- high-quality assembly without backlash on the hinge;
- thick steel on the working edges;
- cut copper and aluminum conductors;
- two grooves for thin and thick cables, which improves performance with dissimilar wires;
- maximum cable diameter 12 mm;
- 1000 V protective insulation;
- attractive price from 500 rubles;
- optimal semicircular form of grip for strong pressure;
- compact dimensions 160x55x30 mm;
- light weight 280 grams is not hard to carry in your pocket;
- suitable for stripping ends.
Minuses:
- not designed for steel;
- a short length of 160 mm may be too short to reach a fixed cable in the shield;
- You can cut the wire with a diameter of 16 mm, but you will have to open the handles strongly, which is inconvenient when mixing;
- can jam in a compressed position, which requires dilution with two hands.
Knipex KN-9526165 - with non-bending edge
This is the best cable cutter for long-term operation due to the manufacture of the cutting part of tool steel with additional oil quenching.
So that the tool does not open up in the bag and does not cut anything when pressed, the breeding mechanism is equipped with a folding support, just behind the hinge.
The device is always in the folded position, and the user opens the lock just before setting up the cable.
Pros:
- degree of isolation from current up to 1000 V;
- a continuous cutting surface of edges without a central tooth, which allows winding wires with a diameter of up to 15 mm;
- high sides against sliding of fingers on metal;
- cut copper and aluminum;
- Compact size 160x65x30 comfortable to carry in your pocket;
- adjustable clamping screw on the axle;
- lightweight 280 grams;
- hardened steel on the edge;
- long service life;
- easy cut without much effort;
- adjustable spring in the hinge facilitates one-handed operation.
Minuses:
- cost from 4900 rubles;
- a length of 160 mm may not be enough in a narrow long box with wiring.
The best cable cutters for small cables
This is a household and professional tool for electricians, where the width of the cut varies from 10 to 18 mm, which will allow you to work with cables from the antenna to the supply line of a large house. The price of such cable cutting depends on the type of steel, functionality and usability.
SHTOK 08207 - for a small panel board
This is the best cable cutter for a small panel board due to the compact dimensions of 160x85x30 mm and the rounded shape of the blades on the end, which will allow you to gently manipulate the tool in tight space with one hand.
Steel handles are covered with a thick layer of insulation, softening the pressure on the hands. The stops in front of the cutting part are high, and will not allow the electrician to move his hands further. Kabelerez material - chrome-vanadium steel, which eliminates corrosion.
Pros:
- suitable for stripping and cutting wires with a diameter of up to 12 mm;
- cut copper and aluminum regardless of the cross section of the wires themselves;
- chrome-vanadium alloy cutting part;
- the cost is one of the most affordable from 470 rubles;
- metal stop immediately under the hinge eliminates pinching fingers by suddenly squeezing the handles to the end;
- coating protects against electric shock, but up to a voltage of 250 V;
- wearable weight is 260 grams;
- insulation of a different color is hidden under the plastic red coating in order to visually monitor wear and replace the tool in time;
- Cuts easily within its scope.
Minuses:
- clumsy design;
- badly lie in large hands (the little finger slips off);
- on the maximum cable dimensions (12 mm), it is necessary to use the second hand to open the blades to the desired dimensions;
- Do not cut cables and bolts (jam edges).
KW Nki-12u - a simple analogue of German brands
This is the best option for cable cutting with good performance and reasonable price compared to European models.
The cost of the tool is 850 rubles, and its working part is made of a chrome-vanadium alloy, which does not allow steel to rust with frequent contact with moisture or storage in an unheated room. The maximum diameter of the cutting material - 12 mm.
Pros:
- the shears for cable cutting are made of thick two-component rubber, which softens the pressure on the arm as much as possible;
- bumpy protrusions prevent slipping inside the sweaty palm when gripping;
- stops are provided to limit the position of the hand
- the complete reduction of the knives is determined by the closure of two protrusions under the hinge, which additionally protects against pinching;
- cost from 850 rubles;
- The working surface of the blades in the form of a solid crescent is optimal for working with wires of different diameters and has made it possible to reduce the size of the head;
- weight 220 grams;
- there is no backlash;
- 170 mm length suitable for work in an open and limited space;
- clean cut without burrs on the veins.
Minuses:
- axial screw is not adjustable for travel stiffness.
The best cable cutters for large diameter cables
This tool is used to cut the cable with a large number of cores of thick section. The maximum value of such wires reaches a diameter of 120 mm. When choosing a model, it is necessary to pay attention to the steel grade and the degree of dilution.
VDE 1000V NWS 043-49-VDE-210 - will cut the wire with a diameter of 25 mm
This German cable is the best for working with large-diameter wires, because its blades are bred to a value of 25 mm. Precision sharpening gives an even cut and does not allow flattening the end of the wire. Wide stops in front of the hinge protect fingers from current-carrying parts.
The tool is easy to mount in a special loop on the belt electrician. The cutting edge is equipped with two waves of cut, which improves performance when working with cables of different diameters simultaneously.
Pros:
- thick coating facilitates pressure and protects the palms from injury;
- rubberized covers are designed for current up to 1000 V;
- ratchet mechanism allows you to control the degree of compression;
- thick frame with hinge withstand frequent operation;
- no backlash on the axle;
- suitable for aluminum and copper cable;
- matt chrome finish does not glare and does not rust;
- maximum closed handles;
- the screw joint is adjustable according to the degree of ease of movement that each master can customize for himself;
- a long length of 210 mm will allow to reach the remote wires in the electrical cabinet;
- weight 315 grams;
- at the ends of the arms there are bump stops that limit the course and prevent skin pinching;
- stylish bright design;
- forged tool steel on blades;
- ergonomic grip on the handles;
- snacks up to 25 mm in diameter.
Minuses:
- cost from 3766 rubles;
- to eat a thick wire you need to wield with two hands;
- not suitable for use on steel cables, cable ties.
It will be interesting to friends too
