Hot water is one of the necessary elements for a comfortable life. Where there is no centralized supply of coolant, use boilers. In them, the water is heated by the heating elements, which are dry and wet. Due to the accumulation of mineral deposits in water or power surges, they become one of the most vulnerable places in the structure and fail. You can restore the work of the boiler by installing a new heating element, and our rating of the best heating elements for water heaters will help you choose good models for each type of device.
Best immersion heaters for water heaters
Such equipment is installed directly in a container with water, therefore it is considered to be submersible.
The wet type of work is optimal by accelerated heat transfer from the heating element to the liquid, but is more susceptible to the negative effects of suspensions and is considered more dangerous. When choosing, you should pay attention to compatibility with models of boilers and tank size.
Termeks 2.0 kW RGS YH 1.2 mpA -TW - fits other models
This is the best heater for water heaters, since it fits to various apparatuses not only of Termex brand. Compatibility with the main brand is represented by more than 20 models. But TEN is designed for all round boilers with a volume of 30 liters from Ariston, Timberk, Garanterm.
External design is equipped with everything necessary for full-fledged work: two empty connections for the installation of thermal sensors, terminals for connecting contacts, two brackets for current passing and heating.
Pros:
- the element is capable of operating in two modes with a power of 700 and 1300 W, as well as in a maximum mode of 2000 W;
- the 64 mm flange has a stamping and corresponds to the mounting hole of most models of boilers;
- the installation of the anode is simple due to the threaded attachment;
- pure copper tubes that protect against corrosion;
- Convenient wiring connections through cover terminals;
- original Italian production.
Minuses:
- cost from 1350 rubles;
- 6 months warranty.
TEN Electrolux EWH Centurio Digital, Royal 2.0 kW - with a choice of power sharing
This is the best heater for the water heater of the Swedish manufacturer, which you can buy for the boiler and pre-select heating modes according to the user's needs. The model has a maximum rate of 2000 watts, and there are a choice of operating modes: 1300 + 700, 1500 + 500 or 1000 + 1000 watts.
For heating water using two stainless tube-brackets, differing in length. They are coated with an anti-corrosion compound. Terminals for connection are bent by 90 degrees, which facilitates the connection of contacts.
Pros:
- standard mount with a flange of 64 mm;
- anode socket with already threaded 6 mm;
- screw method of fixing wires does not require a soldering iron;
- two hollow tubes for installation of the operating and emergency thermostat;
- light weight 334 g;
- TEN withstands current surges up to 230 V;
- copper coating;
- 34 cm short tube length allows it to be installed in most boilers.
Minuses:
- cost from 1450 rubles;
- in view of stainless tubes, they are more suitable for houses with water intake from a well than plumbing;
- Anode is not included.
TEN ARISTON 2000W RCF 48mm - short but powerful
This is the best heater for a water heater from the Italian company Ariston, which fits all models of the RCF series. Its length is 280 mm, which permits installation even in small-sized boilers.
The short length is ensured by the curved shape of the heating element. The longest part is the tube for the thermostat, remaining straight.All submerged parts are made of copper, which ensures long-term resistance to wet environments.
Pros:
- fits all models with a hole for the flange of 48 mm;
- Italian production;
- 2000 W power provides fast heating;
- convenient connection of terminals in view of the form of the "mother";
- brass flange;
- outside plastic cover, insulating surface and contacts;
- prepared anode hole;
- tube under the sensor.
Minuses:
- cost from 1250 rubles;
- you can install only one thermostat (without emergency);
- Anode is not included.
The best dry heaters for water heaters
This type of equipment is more durable because the heating element does not come into direct contact with water. This increases the safety of the use of the device, but significantly lengthens the heating time.
Heaters to them have a simple and complex shape that depends on the model. Therefore, when choosing, it is important to match the fixing units and dimensions.
TEN dry 1200 W for Gorenje SL, GB, OGB - with a long service life
This is the best dry heater for water heaters, because it has a long service life. The simple form of the body is protected from moisture and deposits.
The heating element is made of a bent and collapsed tube with forked ends. Easy connection is provided by captive terminals, in which holes are already drilled, so you do not need to solder anything.
Pros:
- cost from 950 rubles;
- simple installation;
- 1200 W power provides high capacity heating;
- a diameter of only 12 mm makes it compatible with many models;
- durable insulation outside;
- increased safety from electric shock;
- brass bar inside.
Minuses:
- length 440 mm is suitable only for large water heaters;
- Included no magnesium anode.
TEN 3000W steatitovy for ATLANTIC - it is calculated on big tanks
This is the best dry heater for water heaters of the company Atlantic, which have large tanks for heating water.
The power of this device is 3000 W, which allows the liquid to be heated much faster. The heating element has a tubular structure, closed with additional materials, excluding contact with water.
Separately allocated to the common plate terminals for connection, which helps not to get confused. The remaining contacts are combined with a yellow transparent platform and are intended for sensors.
Pros:
- heating element in a reliable protective sheath;
- plugs for mounting cap type with powerful bolts, which ensures reliable contact and protects against burning;
- the use of ceramics in the device significantly extends the service life and protects against overheating;
- power 3000 watts;
- due to placement in the enameled flask is not susceptible to bloom and corrosion;
- suitable for all types of water;
- minimum maintenance costs;
- can warm up to 200 liters.
Minuses:
- cost from 5000 rubles;
- The length of 460 cm is suitable only for large tanks of water heaters of other brands;
- compatible with only one model of the manufacturer Atlantik;
- requires more careful transportation in order not to damage the ceramics;
- more complex installation;
- Only suitable for three-phase networks.
It will be interesting to friends too
