Plastic windows are widely used for residential and commercial facilities for several decades. They consist of metal reinforced inserts and PVC profile, resistant to rotting and swelling. The design with rubber sealing contours and several glass panes between which air is preserved in the chambers reliably insulates against noise and cold, and also does not require complicated seasonal maintenance, as is the case with wooden ones. The rating of the best PVC windows assembled the most popular models for installation in the kitchen, bedroom, hall, bathroom and for industrial facilities.
The best single PVC windows
Such structures may have small and large sizes, be deaf or open. A feature of the type is the lack of vertical partitions, providing a good overview.
This also affects the cost, due to lower costs for manufacturers of metal profiles. When choosing, you need to pay attention to the insulating properties.
Rehau Blitz - optimal for the kitchen
These are the best PVC windows with a Blitz profile type, which are suitable as single-chamber for installation in a kitchen with a small opening of about 700x1000 mm. Two glass 4 mm thick each provide the necessary insulation from the sounds on the opening of a small area.
A glass unit with a thickness of 32 mm with a heat pack 4+ is optimal for a non-living room, in which only periodically prepare food and eat. The plastic profile has three chambers inside, separated by partitions, which excludes heat transfer.
Pros:
- long service life of products of the German brand;
- cost from 2245 rubles per square meter of the product;
- Windows of such a manufacturer can be covered on top with lamination, which gives the surface a natural wood color or other shade;
- The total thickness of the PVC profile is 60 mm, which gives good rigidity and resistance to stress during everyday use;
- You can order the opening of the sash in any convenient direction, depending on the location of furniture in the kitchen;
- the design provides two contours of the sealing rubber between the plastic and the glass, which prevents the penetration of dust and moisture (available in a choice of three colors - black, gray and white);
- inside the profile there is a U-shaped reinforcement of steel, which increases the strength of the frame.
Minuses:
- no moisture absorbers;
- only two glasses;
- no vents.
KBE Engine - for the bathroom
These are the best PVC windows from the German brand, which are well suited for installation in the bathroom as single doors.
In such rooms, small window openings, so you can save on the profile by selecting the type of Engine. Despite the budget segment of the product, the model has three glasses, which will provide reliable thermal insulation in the bathroom, where temperature preservation is so important.
The L-shaped form of the closing part contains two seal loops on the outside, which covers the drafts. It is practical to order a window with the possibility of airing with both a vertical opening and a horizontal one.
Pros:
- Each of the three glasses has a thickness of 4 mm (for this type of profile, installation of glasses up to 6 mm with an additional order is allowed);
- The total width of the glass unit is 34 mm; it protects the room from rapid cooling even without heating;
- installation of a double-glazed window on 50 mm is possible if to use a fold extension;
- each glass has its own sealing contour, which prevents the movement of air inside;
- cost from 2295 rubles per square meter;
- Inside the plastic profile there are three longitudinal independent chambers that create reliable sound and heat insulation;
- increased elasticity and strength due to steel reinforcement in the form of a closed square inside;
- profile thickness of 58 mm will be optimal for placement even in narrow walls;
- the possibility of lamination of white plastic in one of more than 30 colors.
Minuses:
- no filler in profile chambers;
- This profile loses a little to others in terms of noise insulation.
The best PVC casement windows
Such models are used for larger window openings that need to be reinforced with a vertical insert and the possibility of airing without plowing the entire section.
Install them on a large kitchen in the bedroom. When choosing, you need to remember that it requires increased thermal insulation.
Rehau Delight - for the children's room
This is the best PVC window for decorating a child's room due to the profile thickness of 70 mm, which contains five chambers on each side of the wall. This contributes to increased warming and savings in heating in such a room.
Damping pads are located under the windows to ensure the tightness of the chambers and a strong hold even with strong claps of the flap. The vertical partition allows you to freely ventilate the room without opening the entire window. In the nursery such a window can be equipped with locking handles.
Pros:
- holes in the profile for microventilation will allow the design to "breathe" and eliminate condensate in the winter;
- German plastic can be laminated in the color of wood, which will give more comfort to the children's room;
- three glasses of 4 mm each are durable and well protected from cold;
- the glass unit has a total width of 36 mm and can be supplied with a heat packet from the gas;
- the five-chamber profile with a width of 70 mm is very durable and will withstand any loads;
- closed metal inserts located around the entire circumference inside the frame give the frame increased rigidity;
- each of the three glasses has its own sealing circuit;
- two hollow elastic bands on the perimeter of the opening flap;
- The model can be ordered with one or two opening sections.
Minuses:
- cost from 2650 rubles per square meter;
- due to the five internal chambers of the frame look cumbersome.
The best triple PVC windows
These windows are installed in large rooms as a hall, living room. They are practical in spacious offices, offices or in stores, as well as in industrial premises. Due to the large area, the structure needs special insulation in order not to contribute to the cooling of the building.
Gutwerk 70 - for an industrial building
These are the best tricuspid PVC windows for installation in industrial buildings with a large glass area.
This product has an acceptable cost of 2225 rubles per square meter, but its design includes three glasses at once, which will provide high sound insulation and help save on heating. Profile thickness 70 mm withstands heavy loads.
Pros:
- four chambers inside the profile give it rigidity and prevent heat exchange processes;
- galvanized steel for reinforcement increases the strength of the whole structure;
- glass 4 mm thick with the ability to order 6 mm;
- A 44 mm wide glass pane keeps a large amount of air inside the chambers to increase heat saving of the building;
- 70 mm profile thickness retains geometry over a large area;
- deaf and opening models can be ordered;
- inside frame is absorbent.
Minuses:
- no ventilation ducts, so in winter the windows can “cry”;
- Missing chamber fillers.
KBE 88 - for the hall
These are the best tricuspid PVC windows for operation in a spacious hall, since they have an original profile shape with a convex frame, giving the construction volume. If you decorate their surface with laminate wood, then in shape it will be difficult to distinguish it from real wood.
The model is also different in profile width 88 mm, which houses 6 chambers on each side, between the walls of which it is difficult to transmit sounds and heat.
Pros:
- three glass 4 mm thick;
- the total cross-section of the glass 52 mm is one of the largest and can withstand temperatures down to -52 degrees;
- extra strong construction due to 6 chambers on each side;
- the possibility of finishing the laminate in one of 33 colors;
- bulky steel inserts to increase stiffness;
- three color options for the sealing circuit;
- full insulation;
- unusual convex frame design.
Minuses:
- cost per square meter from 3000 rubles.
It will be interesting to friends too