Motor-pumps are a water pump with two nozzles. Inside the round case, two blades rotate, driven by a gasoline or diesel engine. The fluid forms a centrifugal force and thrust sufficient to raise the water to a level of several tens of meters. The devices are divided according to the power, performance and purity of the water that they are capable of distilling. We have compiled a ranking of the best motor-pumps for pool maintenance, watering the kitchen garden, pumping the pond, utilities and fire targets, which will help you see the best performance and proven models in each category.
Content:
The best fire engine pumps
This type of equipment is connected to any fire extinguishing tanks. It is unpretentious in maintenance and is able to pump over liquid of any contamination.
The main difference between the devices is a quick start without pre-filling the pump and high performance in pumping water to actively extinguish the flame.
FUBAG PG 950T 838246 - for large object
This motor pump is the best for extinguishing a fire on a large object, with whose help you can start to extinguish the flame effectively before the fire brigade arrives, because the unit's capacity is 1300 liters per minute. This creates a strong jet that escapes through a hole 80 mm in diameter.
The input and output are on the same side, which is convenient for quick connection. The design is enclosed in a powerful metal frame with two supports from a shaped tube, so the device can not particularly stand on ceremony - it will withstand mechanical loads.
Pros:
- the four-stroke engine is easy to maintain, because the oil and gasoline are poured separately by level;
- the device does not need to pre-fill the suction hose with water;
- durable frame convenient to carry;
- compact and high-quality assembly;
- motor power 7 hp pulls a large amount of water;
- stable position despite the vibration during operation;
- motor pump is able to pump water of any contamination;
- the height of the accumulated liquid reaches 26 m, which is suitable for extinguishing even a nine-story house;
- the device can suck water from a depth of up to 8 m;
- small dimensions of 535x430x410 mm are convenient for storage and transportation;
- the device will not be forgotten if solid particles with a diameter of 30 mm fall into it;
- fuel tank holds 3.6 liters of gasoline, which is enough for a long time;
- 80 mm hose diameter provides distillation up to 1300 liters per minute;
- The package includes a spark plug wrench, a screwdriver, an inlet filter and several gaskets on the nozzles.
Minuses:
- cost from 16,500 rubles;
- the starter lever comes out opposite the rack of the metal frame and requires to move the hand to the side at the moment of jerk, which is inconvenient when starting;
- Starts only by hand;
- weight 34 kg heavy.
PATRIOT MP 4090 S 335101640 - the leader in performance
This is the best fire fighting pump for quick extinguishing of the flame over a large area since the device has a capacity of 1500 liters per minute.
At the same time, the lifting height of the fluid reaches 30 meters, which allows it to be used to extinguish the upper floors of high-rise buildings (suitable for buildings of 10-11 floors).
The device is assembled on a steel frame and bolted to the profile base. The inlet and outlet of the pump are connected at one corner of the housing.
Pros:
- 3 years warranty from Russian manufacturer;
- quick attachment of nozzles on the nozzles due to the 45 degree rotation system;
- the engine is moved slightly to the side to improve air cooling;
- four-stroke engine with minimal maintenance, stable speed and affordable AI-92 gasoline;
- surpasses water of any pollution;
- high performance up to 1500 liters per minute;
- the power unit has a power of 9 hp due to the volume of 270 cm3;
- pulls the liquid from a depth of 8 m;
- inlet and outlet openings have a diameter of 100 mm;
- 6.5 liter fuel tank;
- surpasses solid inclusions with a diameter up to 30 mm;
- stability on any surface;
- long service life;
- squeezes out water to a height of up to 30 m.
Minuses:
- cost from 22,500 rubles;
- weight 42 kg heavy to carry;
- the neck for oil filling is inconveniently located (it is covered with a fuel tank);
- a large case of 630x450x520 mm is harder to place in the trunk of a passenger car during transportation;
- just a manual starter for the factory.
The best motor pumps for clean water
Such devices have an inlet filter with a fine perforation, which allows only pure water with a minimum number of inclusions to pass.
They are used for watering the garden in an area where there is no city water supply and round-the-clock water supply. The suction hose is lowered into a barrel or well. The second application area is outdoor pools.
Caliber BMP-1200 / 10A - for watering the garden in the country
This is the best motor pump for watering the garden due to the cost of 5800 rubles and compact size. The unit weighs only 6 kg, so taking it out of the garage and putting it on the plot will be easy, even for the elderly.
The unit is available in two versions of the case with an H-shaped lower base and a separately screwed handle-bracket for transfer or with a common T-shaped inverted frame of steel tube.
In the first version of the case rubber tips are provided that prevent sliding on a smooth surface.
Pros:
- cost from 5800 rubles;
- convenient access to connect the supply and discharge;
- handle for transportation;
- small dimensions 295x330x330 mm;
- small weight of 6 kg;
- despite the power of 1.63 hp raises the water to a height of 30 meters;
- engine size of 40 cm3 requires little fuel;
- can suck water from a well depth of 8 m;
- diameter of the outlet 25 mm is convenient for installation of a watering network;
- electronic ignition system;
- on the suction pipe thread that facilitates the selection of fittings for connection.
Minuses:
- plastic engine protection;
- two-stroke power unit requires mixing fuel and oil;
- productivity is only 167 liters a minute;
- Starts only from a manual starter;
- keys and gaskets are not included;
- The fuel tank holds only 950 ml of gasoline, which means refueling in a large vegetable garden.
PATRIOT MP 2036 S - for filling and draining the pool
This is the best motor pump for filling the pool with clean water and its subsequent removal at the end of the season, because the device has a small size and weight, but pumps the liquid up to 600 liters per minute.
The sturdy frame made of powder coated steel tubes is convenient for quickly transferring and unfolding the communication unit.
The connection of the suction and discharge tubes is carried out quickly thanks to the supplied mating fittings with a quarter turn mount and gaskets.
Pros:
- the motor put aside for effective air cooling;
- Underside of the engine protection in the form of metal plates, eliminating damage;
- in the lower part of the pump, an opening and a cap for draining the water before packing for winter storage or transportation;
- electronic ignition system;
- separate bay of oil and fuel;
- capacity of 600 l / min to cope with filling the pool size of 5x5 m and a depth of 175 cm in 25 minutes;
- power 5.5 hp capable of delivering head to a height of 30 m;
- engine capacity 163 cm3 does not consume gasoline much;
- 50 mm inlet and outlet diameter simplifies the selection of the appropriate hose;
- fuel tank holds 3.5 liters, which does not require stopping work and refueling the unit;
- the device is capable of sucking liquid from wells 8 m deep;
- small weight of 23 kg;
- simple maintenance;
- in the set of pipes and clamps, as well as mesh filter;
- Small dimensions of 490x375x410 mm make storage easy.
Minuses:
- cost from 9000 rubles;
- the starter handle is located on the corner of the case and is inconvenient for a sharp jerk;
- manual way of plant.
The best motor-pumps for low contaminated water
This type of equipment has an average capacity and an advanced inlet filter, which allows pumping water with a small amount of sand and large particles without harm to the pump. It is used for filling and draining decorative private ponds or fountains, as well as at a construction site.
HONDA WB 30 XT - for maintenance of a network of fountains
This is the best motor pump for lightly polluted water to serve the network of fountains, because the internal system allows the run of fractions with a diameter of 6 mm. The Japanese engine has a long service life.
The unit capacity is up to 1100 liters per minute, which facilitates work with large volumes. The case is compact and provided with an almost square frame of steel tube. The engine and the pump are firmly fixed on the base of the profile tube, which increases stability during active operation.
Pros:
- four-stroke Japanese power unit;
- well assembled nodes without play;
- complete two nozzles for nozzles on the tube and swivel mount;
- pumps up to 65 tons of water per hour;
- a small weight of 21 kg is convenient for frequent transportation;
- a pressure of 3.2 bar is created inside the pump, capable of raising the head to a height of 30 m;
- depth of absorption is 8 m;
- fuel tank with a capacity of 2 liters permits the use of the device without interruption in the work of up to 2 hours;
- pumps over particles of garbage with a diameter up to 6 mm;
- compact dimensions 455x385x510 mm;
- power unit power 5.5. hp;
- nozzle diameter of 80 mm is optimal for fast work.
Minuses:
- cost from 30,000 rubles;
- inconvenient neck for pouring oil into the crankcase;
- guarantee for goods only 1 year;
- on pipes 80 mm in diameter it is more difficult to find hoses.
YDP20STN - reliable diesel for construction needs
This is the best motor pump for supplying low-contaminated process water to the construction site, which can be used later for mixing the solution and other purposes.
The Japanese unit can lift the liquid to a height of 22 meters, which is equivalent to seven floors. The diesel engine will regularly serve at any temperature and for a long time during operation every day.
Pros:
- separate base for the pump and motor, reducing vibration on the common frame;
- capacity up to 550 l / min;
- absorption up to 7 m;
- 50 mm nozzle diameter makes it easy to find the hose;
- carries debris up to 10 mm in diameter;
- compact dimensions 515x430x490 mm;
- economical fuel consumption;
- motor power 3.5 hp
Minuses:
- cost from 72,000 rubles;
- 2.4 liter fuel tank;
- weight 39 kg.
The best motor-pumps for moderately polluted water
This equipment is capable of carrying large inclusions in turbid water in the pump chamber. The blades are equipped with thick walls that can withstand such loads at high speed. Applications are small park ponds and fish breeding rates.
ROBIN PTG 307 ST - with Subaru engine
This is the best motor pump for dewatering reservoirs in the park or fish breeding ponds due to the long service life of the Japanese Subaru engine with a power of 3.5 hp, as well as a performance of 1000 liters per minute.
In this case, the pump is able to distill particles of debris, algae and stones with a diameter of up to 15 mm. No detail stands for the dimensions of the iron frame, ensuring the integrity of important components in the fall. The engine is mounted on a solid base plate, which reduces vibration.
Pros:
- strong frame with cross bars for frame stiffness;
- ventilated back of the power unit for accelerated air cooling;
- run without pre-filling the pump and hoses with water;
- wide neck for fuel filling;
- in the impeller of the pump high-strength cast iron with the addition of chromium is used;
- transfers fractions with a diameter up to 15 mm;
- the main channels of the pump are made of stainless steel;
- good endurance with frequent use and transport;
- engine power 3.5 hp;
- average dimensions of 527x368x417 mm simplify storage for storage or transportation;
- high performance up to 1000 l / min;
- raises a pressure to 23 m;
- The fuel tank can hold up to 3.8 liters of gas;
- reverse starter is easy to use;
- depth of liquid intake is 8 m.
Minuses:
- cost from 40,000 rubles;
- 1 year warranty.
The best motor pumps for dirty water
With a large volume of water with large debris, the device can easily become clogged, which will lead to engine breakdown, therefore, motor-pumps designed for particularly large particles up to 30 mm are needed.
Apply such units for pumping water from construction pits and basements, as well as drainage of wetlands.
Champion DTP81E - with shock absorbers
This is the best motor pump for dirty water, whose pump can pump small debris, fragments of branches and stones with a diameter of up to 30 mm. The engine of the unit is located on rubber pads, which reduces the overall vibration on the body and contributes to stability even when operating on an uneven surface.
The device is equipped with a diesel engine, which gives some fuel economy and more stable operation in all weather conditions. In order to quickly clean the pump, in the case of particularly large particles, extension cords are provided that twist the fixing screws of the unit halves.
Pros:
- strong frame from steel tubes;
- rubber pads under the motor mount;
- productivity is 1000 liters a minute;
- able to raise the water to a height of 26 m;
- power unit 5.4 hp cope with large volume quickly;
- minimal maintenance of a four-stroke diesel engine;
- long life of the device;
- The average dimensions of 562x455x472 mm are convenient for transportation;
- 80 mm inlet and outlet diameter provides increased throughput;
- electric and manual starter facilitates starting;
- fuel tank holds 3.3 liters;
- drawing in liquid from a depth of 8 m;
- active air cooling of the motor.
Minuses:
- cost from 37,000 rubles;
- weight 65 kg is heavy and requires at least two people when carrying;
- in the configuration there are no response connections for tying the hoses.
The best motor pumps for very dirty water
Such units have an expanded internal channel and strong blades, which allows you to capture and transmit turbid water with especially large inclusions. Motor-pomp are applied in construction and at municipal services.
PATRIOT MPD 3072 SFE - with a reinforced frame
This is the best motor pump for a very dirty liquid, because it has a diesel engine that works confidently at low revs and small jams in the communication routes.
The device is equipped with a particularly strong square tube frame, and the engine and the pump are fixed on two base rails through rubber gaskets. All this allows you to operate the pump in the field and on uneven surfaces without harm to it.
Pros:
- convenient connection of input and output on one side;
- quick disassembly of the pump for cleaning;
- starter handle is located on the edge, where the rack does not interfere with a sharp jerk of the hand when starting;
- fixing of turns by means of a twisting handle on the scale;
- quick couplings;
- passes debris over 30 mm in diameter;
- performance 1200 liters per hour;
- able to squeeze the water up to 25 m;
- powerful diesel engine 5.7 hp;
- nozzles with a diameter of 80 mm;
- Includes 3 clamps, filter, sealing washers and clamping rings.
Minuses:
- cost from 39,000 rubles;
- a key is required to start;
- weight 69 kg
It will be interesting to friends too
