9 best cultivators

Cultivators greatly facilitate the work on the plot due to the rotation of the cutters, which is provided by the engine, as a result of which the user can only send, by means of the handles, the unit to the desired land strip. The most reliable and popular cultivators have a number of key assemblies that have performed well despite the loads and specific conditions. The rating of such garden equipment will help to choose a proven model for loosening, moisture conservation, planting, uprooting weeds, hilling cultivated plants.

The most reliable light cultivators

This technique is used in a garden or a small greenhouse to facilitate loosening the soil around the trees or weed weeds and preserve the manicure and protect the skin of the hands.

Models have a gasoline or electric power unit and a small width of the treated surface, as well as light weight for control and transportation.

Greenworks GTL9526 - for a greenhouse with tomatoes and cucumbers

This is one of the best light cultivators that has a reputation for reliable technology in small greenhouses. The processing width of 250 mm allows you to get the cutters in the narrowest areas and weed the soil around the trunks of tomatoes, cucumbers and other densely planted crops.

So that the earth does not fly into the operator, wide protective wings are provided. The handle of the gas is made in the form of a solid lever-bracket behind a solid handle, so it is convenient to hold it pressed with both right and left hand.

Pros:

• wheels with a high tread, which facilitates movement on loose ground;
• rubberized soft grip is available throughout the horizontal frame;
• convenient gas lock on the right under the handle (to block the bracket and not to keep it constantly);
• 4 mills with 10 teeth each effectively keep the equipment in working position and ensure thorough grinding of the soil;
• a well-designed frame with minima of metal tubes, which made it possible to gain a mass of 16 kg in full gear;
• handle height adjustment for user height;
• small electric motor with a beautiful light green body;
• cuts the soil to 200 mm, which is suitable for most household crops;
• narrow body allows you to handle rows of plants 250 mm wide.

Minuses:

• a thin axis of the chassis mounting, which may bend a bit over time;
• develops up to 350 rpm;
• milling cutters on the axis with a washer and engraver, giving a small gap;
• carrying required for work, and the range of action is limited by the length of the wire;
• 950 watts of low power can cope with dried soil around tree trunks for a long time;
• only one speed, so there should be a place for a turn in the greenhouse, or you will have to turn off the equipment and go backwards, dragging the device with your hands.

Champion GC252 - with economical fuel consumption

This is the best popular cultivator for a small garden in the country or in the courtyard of a private house due to the presence of a gasoline engine, which allows cultivating the soil around the trees and not limiting the working area with a wire.

The consumption of the unit is 550 g of fuel per hour, which helps to save. In the working position, the technician fully relies on the milling cutters and two wheels, so the operator only needs to support and guide the device by the handles.

Pros:

• fully autonomous operation in the presence of gasoline in the tank;
• reasonable price of 9,500 rubles;
• handle height adjustment;
• small weight of 15.85 kg;
• narrow strips of earth up to 250 mm wide can be processed;
• The working volume of the power unit 51.7 cm3 gives 1.9 hp of power. and low fuel consumption;
• equipment capable of performing up to 3200 rpm for fine grinding of soil;
• 225 mm plowing depth is good for loosening the soil, even around large trees;
• the handles are completely removed, for transportation in the trunk of a car, up to dimensions 46x46x30 cm.

Minuses:

• it is impossible to establish a constant speed (only adjustment by the throttle);
• loud two-stroke engine operation;
• gas on the right handle, so the right hand should not be released while working for other manipulations (remove hanging branches, separate woven plants);
• exhausts will not allow to work in the greenhouse (it will damage both the plants and the operator);
• mills have only 4 teeth;
• there are no bearings in the gearbox, but brass bushings;
• no gearbox.

Greenworks G-MAX 40V - for a small greenhouse

It is a reliable cultivator for a small greenhouse due to the absence of exhaust gases and a narrow wheelbase with processing strips up to 250 mm in width.

The unit works with an electric motor from the battery, so the greenhouse may be located on the very edge of the suburban area and you will not have to pull the carrier towards it. The battery is inserted into the front of the case and closed with a transparent plastic cover that protects it from dust and debris.

Pros:

• the frame of thick metal tubes is strong and able to withstand long loads;
• the handle has the shape of an arc and is convenient for holding and moving;
• gas bracket is stretched under the entire horizontal part of the handle;
• high tread on cast rubber wheels;
• 10 multidirectional teeth on each of 4 cutters;
• economical power consumption of 40 V;
• the height of the handle is easily adjusted while using the latch on the racks;
• depth of processing is up to 200 mm;
• weight of 16 kg is convenient for moving even an elderly person;
• the upper part of the body is very compact, which makes it easy to wade between rows of planted plants.

Minuses:

• 350 rotations per minute are suitable only for flat soil, which is regularly treated;
• there is no box of switching of speeds;
• cost from 15,000 rubles;
• Included is no battery and charger (at a price of 15,000 rubles), which will require additional purchases and costs.

The most reliable medium cultivators

Such garden equipment is used on spacious open garden areas or large greenhouses. With its help, not only loosen the soil or remove weeds, but also plant and harvest.

The dimensions of such cultivators allow you to capture wider strips of land in a single pass and penetrate deeper into the soil.

Hammer RT-50A - for the big garden

This cultivator has established itself as the most reliable and popular among the owners of spacious gardens in the country or in the courtyard of a private house.

It has four cutters with blades strongly curved to the sides, which makes it possible to capture 500 mm of width at once in one pass. In this case, the gasoline engine gives complete freedom to move vehicles from home.

The power unit capacity is 5 hp, which is suitable for loosening tamped or dried soil.

Pros:

• the wheels are not located on a common axis, but on separate racks (forks), which allows driving through large blocks of earth and makes the frame structure more durable;
• the handles are covered with thick rubber with ergonomic cutouts for the fingers, so the handles will not slip during the heat;
• the center of gravity of the device is optimally designed so that the motor presses on the unit with cutters for greater penetration, so the operator does not have to exert additional efforts;
• fully removable handles to reduce shipping size;
• 3 year warranty from the manufacturer;
• 1.2 liter tank, which is enough for 90 minutes of continuous work;
• the working volume of the power unit of 159 cm3 gives high power and the ability to work with soil of different density;
• depth of processing up to 360 mm allows you to plant potatoes and other root crops;
• the model is designed for 600 m2 of garden area;
• increased engine life EURO-II;
• clutch lever is easy to press;
• wide wings to protect against the departure of the earth;
• numerous fins for heat transfer and prevent overheating of the motor.

Minuses:

• high price of 20,000 rubles;
• the wheels are very small and have a low tread, so they can be loaded into the ground when moving with the engine off;
• 46 kg will be heavy for women or elderly;
• there are no rear speeds, therefore it is necessary to provide a place for a turn at the fence;
• loud engine operation.

Partner PFT85-800R - with reversing

The cultivator is reliable and popular with owners of large gardens and land plots enclosed by a fence. For processing there are 6 cutters with four curved teeth on each.

The total width is 830 mm, which allows you to quickly pass the garden in the spring before planting to level the ground or in autumn for plowing.

The unit has a backing, so when you reach the fence there is no need for a turn, but it is enough to move back at low engine speeds.

Pros:

• 280 mm deep soil cutting is convenient for various tasks in the garden;
• adjusting the clutch to prevent the rotation of the cutters, but with the ability to leave the motor running (convenient for short stops and turns);
• detachable handles for transportation in the car;
• 6 cutters with a working width of 830 mm;
• The belt drive is protected by a metal casing;
• power unit 4.4 hp;
• there is one front and one rear speed;
• 2.8 liter tank allows you to work without frequent refueling;
• the volume of the power unit of 163 cm3 makes it possible to work on the trampled soil;
• four-stroke engine has a more stable operation and supports the desired speed;
• the chain reducer has a milder effect on the rotation transmitting mechanisms;
• reaches rotation 3300 rpm

Minuses:

• the high cost of 40,000 rubles;
• for transportation in the yard with the engine off it is necessary to raise the handles high, since the model has one chassis in the front;
• the mass of the device is 50 kg;
• exhausts do not allow to work in the closed greenhouses.

Champion BC4311 - with variable wheel position

Such a cultivator is popular for small areas in size, which are located a lot on the territory (large orchard, park area). Convenience and reliability of the model are manifested in the ability to quickly remove and expose shipping wheels.

When working, the cultivator moves exclusively on the cutters, without creating a load on the chassis, and when you need to move from one section to another, the wheels fold back and the machine is transported quickly.

Pros:

• Clutch for safe movement of the unit with the engine running and inoperative cutters;
• chain torque transmission;
• the relative cheapness for a gasoline model is 16,000 rubles;
• the cultivator is designed for plowing and tillage 1000 m2;
• power 2.3 hp gives enough power to grind large boulders, but also economically consumes fuel;
• depth of processing is 230 mm;
• average weight of 31 kg is optimal for users of all ages;
• 430 mm working width is suitable for hilling and weed removal, as well as for general loosening of large areas;
• tank with a capacity of 1.6 liters;
• four-stroke engine with stable performance;
• wide arrangement of handles on the frame is convenient for the direction of the unit.

Minuses:

• small wings to protect against ground overhang;
• handles have nozzles from smooth rubber that can slide when sweating palms;
• no back speed;
• 120 mill rotations per minute.

The most reliable heavy cultivators

Such equipment has a large supply of power and width of the passable area, which allows it to be used in farming for processing spacious plots of land, as well as the development of virgin lands.

In this case, the devices are obtained with large dimensions and large mass, which requires some preparation and training before work.

Hammer RT-75B - with wide cultivation

This is a very reliable cultivator for processing large household plots and loosening the soil in the fields. The width of its axis with cutters is 970 mm, which allows you to pass the site by a strip of 1 m at a time.

The frame of the unit is made of a profile pipe, which strengthens the entire structure. At the bottom there is a fork for adjusting the position of the wheels. The control knobs are made of a thick round pipe and have a removable part on the bolts.

Pros:

• durable chain transmission of torque from the engine to the axis with cutters;
• clutch for safe movement at idle;
• mills have a prefab bolted construction that can be repaired when hit by a stone;
• powerful motor 7 hp, volume 212 cm3 allows you to cope with dried blocks;
• the coulter goes down to the minimum limit, which allows the soil to be cut to 310 mm;
• there is a backing to perform maneuvers in a limited space;
• booster pump helps to quickly start the engine, even after a long idle;
• on the apparatus a tank with a capacity of 3.6 liters, ensuring long-term operation;
• 6 cutters with a width of 97 cm;
• engine operation in four cycles with a valve air supply.

Minuses:

• cost 37,000 rubles;
• plenty of exhaust;
• when moving on wheels on loose ground (even before the place of commencement of work) they can be loaded;
• The weight of 66 kg is inconvenient for management and requires physical endurance.

Elitech KB 60N - optimal for farming

With this reliable and popular cultivator, it is convenient to develop virgin soil or plow spacious fields for sowing wheat and other grains. The device has an optimal ratio in price and quality, and will quickly pay for itself.

Six mills are adjustable on the axis, so the technique can handle both narrow strips of 330 mm and wide up to 850 mm. Two wheels on a fork without a common axle are convenient for rolling and keeping the device on uneven ground.

Pros:

• comfortable gas knob and gearshift on the right side of the steering wheel, and the clutch on the left;
• the optimal cost for a professional cultivator is 22,000 rubles;
• a double frame made of round tubes to reinforce the structure;
• powerful power unit 6.5 hp, 196 cm3 volume;
• 3.6 l fuel tank;
• engine speeds up to 3400 per minute;
• there is a rear speed and neutral position of the switch;
• processing width 850 mm and depth 330 mm;
• fuel consumption of only 400 g per hour;
• chain reducer of steel with a collapsible case for repair;
• long service life of the engine (up to 10 years without major repairs, with regular replacement of oil).

Minuses:

• rubber pads on shaky handles;
• weight 56 ​​kg requires good physical health;
• it is impossible to hang the snow plow (will not work on the mount).

Huter GMC-7.0 - with gearbox

This is the best cultivator among popular models for multitasking use. It has a gearbox with two front and one rear speeds, which allows you to quickly go through softer ground and slower to work on solid ground.

Raising the cutters to the top and turning on the transfer will turn off the wound roots and grass. At back speed, it’s easy to turn around with limited space.

Pros:

• wide neck for fuel filling;
• large wheel in front to facilitate maneuvers;
• supporting discs on each side of the axis with cutters;
• powerful frame from a profile pipe;
• convenient gearshift near the steering wheel;
• engine power 7 hp;
• depth of processing is 300 mm;
• 3.6 liter tank;
• plowing width adjustment from 600 to 830 cm;
• changing the position of the steering wheel;
• wide wings.

Minuses:

• cost 28,000 rubles;
• weight 77 kg

See also:

Top 10 quads

5 best brush cutters

5 best garden shredders

6 best snowmobiles

7 best wood splitters

7 best motorcycle dogs and motorcycle towers

How to choose a benzokosu for quality and price

How to choose a lawnmower to give: gasoline and electric

How to choose a motokosa for home and garden