The motorblock is not for nothing called a mini tractor, because it is just such a traction device that can be used to separately pull the rear attachment, attach a trailer, push shovels in front or transfer torque to the power take-off shaft (grass mowing, snow removal). In addition, the units can connect the cutters for the active grinding of the soil. From the ranking you can find the best tillers of various classes for small gardens, medium-sized plots and huge fields, which will help you to choose equipment with optimal parameters and not to overpay.
Content:
The best tillers lightweight
This technique is used in home gardens near the house and gardens in the country. Low weight, compared with other classes, makes it easier to manage the unit and handle areas up to 0.5 Ha.
Models are equipped with several speeds and a small engine power, so they will not be able to transport too large loads.
Caiman Vario 60S B & S - with an additional wheel and gearbox
This is a practical walker for older people with a summer cottage who love to grow their vegetables. An additional wheel in front facilitates the retention of balance when driving equipment without a trailer, as well as in the cultivation mode, when the main chassis are removed and the cutters are mounted on the axle.
The handle is reinforced with a jumper, so it does not bend from prolonged use. Speed shifting is done automatically.
Pros:
- Japanese Subaru engine with a great resource;
- complete shaft with 6 mills;
- metal casing, completely covering the clutch belt drive;
- motor power 6 hp pulling a plow easily, pushing a shovel with soil or snow, and also suitable for a tractor with a trailer;
- Automatic transmission with 2 speeds forward and 1 reverse;
- the chain drive for soft transfer of blows of a mill on a stone;
- tank capacity with gasoline 3 liters;
- weight 57 kg;
- plowing width 90 cm with a maximum depth of 32 cm;
- 3 year warranty;
- adjustment of handles is carried out both horizontally and vertically.
Minuses:
- the front shovel is mounted instead of the front wheel, so the installation takes a little longer (with disassembly);
- cost over 50,000 rubles;
- weak point - the clutch roller, which breaks down;
- no wheel lock.
Garden France T70 BS - with soft coupling
This walker will be the best for the land, which has a lot of stones and thick roots.
In order not to damage the motor when plowing, the unit is fitted with a V-belt clutch, which conveys speed to the gearbox, but easily slips when rotating parts collide with an obstacle. This extends the service life of the Japanese B & S engine with a power of 5.5. hp
Pros:
- 55 kg weight is not heavy to maneuver;
- the 163 cm3 petrol power unit easily pulls a plow or two cutters across virgin soil, and when installing all cutters it grinds the ground to down;
- width of processing is 91 cm;
- for moving forward there are 2 gears, and also provides reverse gear;
- fully enclosed casing with a belt;
- convenient shift in the center;
- reinforced steering wheel with a wide band connecting;
- it is possible to install the support wheel on the front when working with cutters;
- 3.1 liters of gasoline is placed in the tank, which allows you to process a vegetable garden of 10 acres without refueling.
Minuses:
- cost 50,000 rubles;
- narrow wings, poorly closing on the release of soil;
- The clutch cable dangles too low and must be tied up so as not to get caught during operation.
Patriot Victory - the most affordable
This is the best tiller in terms of price / quality ratio, since the model has an engine power of 7 hp. and costs only 26,000 rubles.
A four-stroke power unit with a volume of 198 cm3 makes it easy to plow virgin soil, plant and harvest potatoes, and transport crops. For switching speeds there is a long handle in the center. The motor in front protects the metal arc.
Pros:
- reinforced handle construction with a jumper;
- maximum grip width processing 100 cm;
- grass spit or other equipment can be installed on the power shaft;
- power of 7 hp;
- there are 4 gears for selecting the forward speed, which is convenient for transportation of the crop or different types of soil;
- 2 rear speeds;
- fuel tank capacity of 3.6 liters;
- wheels with a diameter of 8 inches with good cross.
Minuses:
- on arms there is a thin elastic band from which hands can slide off during a heat;
- when installing 6 cutters, the wings do not completely cover the operator from the departure of the ground;
- the wheel is welded from a thin tube;
- weight 78 kg for the lightweight class is heavy.
The best tillers of the middle class
This technique is used on larger kitchen gardens with an area of 0.5-1.5 hectares. With it, you can grow sunflower, corn, grains or roots.
It is easy to machine and transport the harvest, as well as clean and cultivate the land after the season. For models, the width of the passage is at one time larger, but the mass of the device is also higher.
Kadvi Oka MB-1D1M10 - for the development of virgin
This walker will be the best when the task is to develop virgin soil. 6.5 hp engine power allows you to strongly rotate the blades of the cutters (with a motor speed of 2500 per minute) and cut the roots of weeds.
When confronted with thicker roots from the bushes, the apparatus bounces upward, which gives a signal to uproot. At the same time, the belts are not torn due to the well-thought form of the pulleys, which do not catch the belt rigidly towards themselves.
Pros:
- the width of tillage is governed by the number of mills and varies from 72 to 113 cm;
- The processing depth of 360 mm allows you to reach the deepest roots, so the garden will become much cleaner next year;
- there are 2 forward gears where it is possible to reach a speed of up to 9 km / h;
- attractive price for the middle class of equipment in 26,000 rubles;
- 3.6 liter tank;
- 2 rear speeds;
- easy to start;
- feet forged;
- Included are spare belts.
Minuses:
- the engine is manufactured in China by Lifan concern, therefore it is difficult to predict the service life;
- weight 100 kg;
- gear shifting tight;
- difficult to turn;
- oil is leaking from the gearbox;
- 92 dB noisy work.
Champion BC1193 - good for shipping goods
This middle class tiller is designed specifically for active use with trailers. Its steering wheel has a curved shape for a comfortable sitting position of the operator.
To connect the trailer heavy front part of the motoblock rests on the exhibition leg. The motor is equipped with a volume of 270 cm3 and has 9 hp. for transportation of goods weighing 600 kg.
Pros:
- very powerful steering wheel on a rack of thick pipes;
- comfortable curved shape handles with bevel down;
- height adjustment;
- PTO;
- 110 cm processing width gives high performance;
- Included immediately comes 8 mills;
- cultivation depth 30 mm;
- engine speed 3600 per minute;
- disc clutch for smoother pulling away;
- 78 dB quiet operation;
- tank capacity of 6 liters;
- wheels 12 inches;
- reverse
Minuses:
- you need to tie the cables so as not to hang out;
- cost 41,000 rubles;
- only two speeds ahead;
- weight of 132 kg is heavy when turning on loose soil.
Daewoo Power Products DAT80110 - very hardy
The motoblock is distinguished by a solid frame assembly from a shaped tube with a protective arc in front, as well as a rudder made of thick steel with a lintel. The gearbox and gearbox housing is cast from cast iron, which increases its wear resistance under frequent loads.
The unit is able to pull loads well and break caked blocks of earth thanks to an engine power of 8 hp.
Pros:
- wide wings protect well against dust;
- the handle is quickly regulated on height thanks to a clip with a half-turn;
- all cables are neatly tied;
- complete set of 8 cutters;
- installation of the support roller;
- plowing width 110 cm;
- the volume of the motor is 225 cm3;
- 3.6 liter tank;
- mass 86 kg for the middle class is very convenient;
- high-quality metal;
- virtually no vibration in the work.
Minuses:
- cost 41,000 rubles;
- gear stick uncomfortable and can break off;
- After the factory assembly, you need to check all the connections - maybe something will have to be tightened up.
The best tillers heavy class
This is a technique over 100 kg, which has great opportunities for attachments and powerful power units to process large areas of land in a short time. They are used for farming and areas of 1.5-4 hectares.
Caiman 340 - the most powerful in its class
This tiller is the best power among heavy devices due to the volume of the power unit of 404 cm3 and the presence of 14 hp This required the placement of the engine at the end of the frame and the installation of a protective arc from a thick pipe.
The wheels received a constant axle, and the cutters and other equipment are connected separately from the rear.
Pros:
- wide casing, completely covering a number of cutters;
- powerful steering wheel with body trim makes it look like a quad bike;
- PTO;
- start up model with electric starter;
- engine speed 3600 per minute;
- automatic transmission;
- 4 front speeds and 3 rear;
- lateral rotation of the handle is provided;
- Subaru engine.
Minuses:
- the cost is 241,000 rubles;
- difficult to roll unwound, which creates additional fuel costs to get to the site;
- processing width of 90 cm in the basic version;
- for such a motor, a 3.6-liter tank is small and requires frequent refueling;
- weight 150 kg
GS81D Scout - Six-Speed
This is the best multitasking motoblock that has a manual gearbox with 6 forward speeds, which allows you to choose the right movement depending on the structure and condition of the soil, as well as move on uneven terrain with a load.
For interaction with mills the wide trailer and the additional supporting wheel is used. The front of the plant provides a headlamp for work in twilight time.
Pros:
- powerful wedge-shaped frame;
- high engine position to maintain balance;
- Large 12-inch wheels give good flotation on rough ground;
- the wheel is welded from a profile pipe with a rigid structure;
- 6 speeds for moving forward and 2 back;
- friction clutch;
- attractive price for a heavy class 75,000 rubles;
- engine power is 8.8 hp;
- PTO;
- the volume of the power unit 402 cm3;
- reverse direction of rotation of the cutters;
- diesel allows you to pull better at a lower rpm.
Minuses:
- weight 213 kg;
- the gearbox is manual, and the shift knob is short;
- processing width of 90 cm in the basic version;
- large dimensions 2180x890x1250 mm require enough space for a reversal.
Motor Sich MB-6 - for quick moving
In this motoblock, economical fuel consumption and sufficient speed of movement are well combined, which is suitable for regularly cultivated fields and transportation of the crop.
The petrol engine has a volume of 252 cm3 and a power of 5.5 hp, and at the same time develops a speed of up to 16 km / h. Outwardly, a very simple type of device, which has almost no frame: the gearbox and the motor are connected together and the steering wheel is attached to them.
Pros:
- to stop there is a folding stand in front;
- shaft for transmitting torque;
- four-stroke engine;
- wheels with a diameter of 12 inches;
- 4 forward speeds;
- moves back at a speed of 4 km / h;
- high tread wheels;
- high ground clearance;
- direct drive from the motor to the gearbox through the flange;
- differential lock;
- connects a plow, hiller on one and two bodies, harrow, planting set, cutters;
- gear reducer;
- disc clutch;
- economical fuel consumption (about 1.0 l / h).
Minuses:
- simple view;
- weight 217 kg;
- no engine underside protection;
- processing width 80 cm;
- air cooling.
It will be interesting to friends too
