Recently, residents of homes in Russia have begun to approach the standards of Europe, and light and pretty aluminum radiators fit into them as well as possible. Best of all, aluminum radiators are suitable for connecting them in heating systems in private homes and cottages. Due to the fact that in the central systems, heating multi-storey residential buildings, water treatment is rather weak, radiators are not recommended to be installed there, as there can be serious consequences even after another preventive examination. When choosing it is necessary to take into account many important details that most strongly affect their performance. Despite the huge choice of positions in the market, you can get Chinese fakes that will not work even a month. Based on this, we have made a selection of the best aluminum radiators that will serve faithfully for many years.
Content:
Aluminum radiator which company choose
On the modern market, many companies offer their devices. Their devices may differ in their characteristics quite a bit, but in their work they may show themselves completely differently.
The best manufacturers are some Italian companies whose devices are distinguished by their elegance and form, and a couple of Russian developers who are trying to copy other devices.
The following companies are listed in descending order of their popularity and fame in our country:
1. Global
2. Royal
3. Rifar
4. Ferroli
Do not forget that the inexpensive crafts of Chinese companies not only do not correspond to the declared capacity, but also do not withstand a couple of months. The discrepancy in the parameters comes to 35%! Shop only from reputable manufacturers of aluminum radiators.
Top sectional aluminum radiators with side connections
Royal Thermo Revolution 350 x14
These radiators are produced at a factory in Russia, despite the fact that their manufacturer is from Europe. Due to this, they are fully adapted to the particular climate in our homeland.
The form of this device is made in a special way so that in those areas where heated air comes out, deflectors are formed, so that air is evenly distributed over the whole area of the room, leaving no layers that will be less warm. Not only water can act as a heat carrier, but also antifreeze.
With the help of a special technology PowerShift, patented by this company, the heat output of the radiator is increased by several percent. The maximum heat dissipation of the radiator is 1974 W, and the temperature with which it operates is up to 110 degrees. In total, 14 sections are delivered, with a total weight of 14 kilograms.
Based on the many positive reviews, this radiator has the following advantages:
- High distribution efficiency;
- Special design that improves aerodynamics;
- High ergonomic device;
- Good paint quality;
- Alloying additives that improve reliability.
Minuses:
- Sensitivity to the choice of water quality.
Tessen 500/60 x8
This radiator, which consists of an eight-section radiator, can bring warmth on any given day. It is suitable for installation not only in a residential, but also in a public building, which has a water heating system.
The room is heated not only by the radiation of heat from the device itself, but also by means of convection. All parts of the section are made of aluminum alloy and are connected with nipples.Increased corrosion resistance combined with high mechanical strength allows long-term use of this unit.
The device weighs a little - only about 6 pounds. The center distance is 500 millimeters, and the operating pressure is 16 bar. The radiator is produced by injection molding.
The main advantages of the device, which are based on user reviews:
- Low weight;
- Stylish and ergonomic design;
- Easy installation;
- High degree of strength and corrosion resistance;
- Low cost.
Minuses:
- Poor painting.
Global VOX EXTRA 350 x10
This radiator was created by the best radiator manufacturer in the world, the company is located in Italy. In developing this cast aluminum model, the creators took into account its work in the specific climate conditions, resembling the Russian one.
The device has a fairly high heat transfer rate - 890 watts. During the painting used a special method of two steps, thanks to which the appearance of the device will remain unchanged for many years. Each section has a length of 9.5 centimeters, which is why the radiator can fit even in a small space.
The device works with a maximum temperature of 110 degrees, and weighs about 10 kilograms. The heat carrier has a maximum pressure of 8 bar, which is not the highest rate, but this will be enough to use the device both in houses with several apartments and in private cottages.
With the help of many customer reviews of this device, we were able to identify the main positive aspects:
- Painting done by a two-step system;
- Compact;
- High reliability of the device;
- Up to ten sections can be connected;
- Nice design.
Negative:
- Average cost.
Global VOX R 500 x12
Another device produced by the most famous brand from Italy. This model is adapted to be used both in suburban and closed, and central heating systems.
In such systems there should be a distance of about 500 millimeters between the inlet and outlet tubes. The artificially reinforced construction and inner layer for protection from fluorine-zirconium not only ensure long operation of the radiator, but also increase its resistance to a low-quality heat carrier.
The device has a fairly good heat dissipation - two blocks of six sections is enough to heat a room up to 30 square meters. meters The maximum pressure of the device reaches 16 bar. The volume of the device - 5 and a half liters, and the center distance - 50 centimeters. The unit weighs quite a lot - under 18 pounds.
This aluminum radiator, based on positive customer reviews, has the following advantages:
- Excellent heat transfer;
- Highly efficient energy distribution;
- Good paint quality;
- The presence of a special protective layer.
Minuses:
- The radiator is not suitable for all heating systems.
IPS Elegance 500 578 x8
The radiator, which has a very good design. It is produced in Russia, even though the manufacturer is European. Its development was carried out with all records of heating systems, both automated and centralized. It is used to heat small office buildings, both low-rise and high-rise. In addition, it is widely used for heating industrial buildings.
The device has good parameters - heat emission is 968 W, and the maximum temperature at which it works is 110 degrees. Consists of eight sections, with a maximum working pressure of up to 16 bar.
The main advantages of the aluminum radiator model, which we have identified from customer reviews, are as follows:
- High heat dissipation;
- Good corrosion resistance;
- Easy to install;
- Compact device;
- Sophisticated and useful design.
Minuses:
- There is a sensitivity to what water is made of;
- If air plugs appear, additional equipment must be installed.
The best aluminum radiator with a bottom connection
Rifar Alum Ventil 350 x16
The Russian manufacturer has developed a series of Ventil specifically for those people who need to connect the radiator from the bottom. On this model, you can install a special thermostatic valve.
The very small wall thickness of the sections and the oval section, which has a specific geometry, guarantee a huge working pressure of 20 bar and high heat transfer of 2448 W, which is ensured by a large number of sections, with a total weight of 19 and a half kilograms. The volume of all sections is three liters, and the distance between the axes is about 8 centimeters.
This model has the following advantages, which we have identified from customer reviews:
- Pleasant ergonomics of the device;
- High level of heat transfer;
- Resistance not only to corrosion of the surface, but also to the effects of chemicals.
Negative:
- For cleaning, you must use special equipment.
Best tubular aluminum radiator
Purmo Aquilo F1T 90 290 x1
This model is a fun technical solution from a company from Finland. Radiators are installed in the floor of the heated room. The heating element is a black thermal element, which is installed in a galvanized black bath made of steel.
The performance of the radiator is increased due to silent centrifugal fans with 12 volt engines, which are accelerated by the warm air produced. According to user feedback, there is no transformer in the kit, without which it is prohibited to use this device, the grille and the regulator responsible for the fan speed. You can connect the device using two nozzles with a special thread. The device works with a pressure of 10 bar and a maximum temperature of 110 degrees.
Considering the customer reviews of this radiator, we identified the following positive characteristics:
- The device is very compact, so it saves space;
- Excellent heat transfer;
- Stylish design;
- Ergonomic.
Negative:
- High price;
- Need to buy additional equipment.
What aluminum radiator to buy
1. For users who need an aluminum radiator for a small price, the Tessen 500/60, x8 and IPS Elegance 500 578 x8 models are perfect. Both radiators weigh quite a bit and have a small number of sections. They are inexpensive, but are able to provide heat even the cottage.
2. Global VOX EXTRA 350 x10 is suitable for those people who, above all, appreciate quality in everything. The manufacturer of the device is a company from Italy, which is considered the best in its business. The device has a high heat transfer and a high rate of working pressure.
3. Rifar Alum Ventil 350 x16 - the device of Russian origin is suitable for buyers who do not want the radiator to take up a lot of space. At the same time, it has just a huge heat dissipation and weighs a lot.
It will be interesting to friends too
